|
Your download link is at the very bottom of the page... always. |
Processed through Paypal No account required. Donate Bitcoin to this wallet: 1KkUMXvQ2ko3xcJkzitB7WYgoW6m79WFfm Donate Ethereum to this wallet: 0x40E56922F43637224935CDC35e2c96E0392A8505 Donate Litecoin to this wallet: LLYAFEyqjH69gkyCEpRjXNyedRCWrVChfL |
| Files | ||||
| File Name | Rating | Downloads | ||
 |
H2testw v1.4 H2testw v1.4 Data integrity test for USB sticks and other media. The standard utility for revealing fake-sized USB flash drives. H2testw was developed to test USB sticks for various kinds of errors. It can also be used for any other storage media like memory cards, internal and external hard drives and even network volumes. The executable file H2testw.exe needs no installation and can be directly run. It will run on Windows XP, Vista, 7, 8, 8.1, 10, 11 and any server version from 2000. How it works The function of H2testw is quite simple: It fills the chosen target directory with test data and then reads it back and verifies it. H2testw does not overwrite or erase any existing data. It doesn't do any low-level tricks so administrator privileges are not required. If your hardware is working properly H2testw will not harm any existing data. BUT... If the hardware is defective then H2testw is designed to find that defect and might as a side effect damage existing files. Therefore: IF YOU SUSPECT A USB STICK OR OTHER STORAGE MEDIA TO BE DEFECTIVE, EMPTY IT AND TEST IT COMPLETELY WITH H2TESTW. Only empty media can be fully tested with H2testw. In order to be able to reproduce the results we recommend to format the media (quick format will do) and then test it. H2testw writes files of up to 1GB to the chosen destination and names them 1.h2w, 2.h2w, 3.h2w and so on. If the target directory already contains such a set of files H2testw will offer to verify them. If there are any other files named *.h2w it will refuse to work. In that case please erase all files *.h2w and hit the Refresh button. After it is done the software leaves it's test files on the medium. You can erase them if you like or verify them again if it's a USB stick, for ... |
 |
381 | Dec 31, 2023 Harald Bögeholz <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/H2testw2_th.png"border="0"> |
 |
Hamachi 2.2.0.328 Hamachi 2.2.0.328 Hamachi will allow you to establish secure direct connections to PCs that are not accessible otherwise due to the restrictions in network setup. By installing Hamachi on two computers and clicking a couple of buttons you can connect them instantly and securely. For example, if your home computer is connected to the Internet via Connection Sharing or Broadband Router, you will not generally be able to access it, say, from your office. By installing Hamachi on both computers and clicking a couple of buttons you can connect them instantly and securely. Now you can browse file shares, run remote desktop or even host a multiplayer game on one computer and join in from another. Just as if they were connected with a physical wire. Hamachi is a networking technology enabling any two computers on the Internet to talk directly to each other regardless of the presence of firewalls or address translation devices on the route between them. Most interestingly, Hamachi enables peer-to-peer communications between two computers residing behind two different connection sharing devices. In geek language - it allows for bidirectional NAT traversal. Peer to peer connectivity becomes possible with the help of Hamachi servers that mediate the establishment of an initial contact between peers. Once peers connect the traffic starts to flow directly between them. This not only ensures that data travels the best route possible, but it also minimizes latency (ping time) and maximizes transfer speeds. Hamachi is secure. All Hamachi communications are encrypted and authenticated using industry-standard algorithms and protocols. Nobody will be able to see what two Hamachi peers are talking about. However what is more important - Hamachi security architecture is completely open meaning that its detailed description is available for review to anyone interested. Features: Network Limits: Network Capacity: Create or join up to 256 Hamachi networks. User Capacity: Each Hamachi network can have ... |
 |
8,575 | Apr 01, 2015 LogMeIn, Inc. |
|
hashcat v6.2.6 hashcat v6.2.6 advanced password recovery Features World's fastest password cracker World's first and only in-kernel rule engine Free Open-Source (MIT License) Multi-OS (Linux, Windows and macOS) Multi-Platform (CPU, GPU, APU, etc., everything that comes with an OpenCL runtime) Multi-Hash (Cracking multiple hashes at the same time) Multi-Devices (Utilizing multiple devices in same system) Multi-Device-Types (Utilizing mixed device types in same system) Supports password candidate brain functionality Supports distributed cracking networks (using overlay) Supports interactive pause / resume Supports sessions Supports restore Supports reading password candidates from file and stdin Supports hex-salt and hex-charset Supports automatic performance tuning Supports automatic keyspace ordering markov-chains Built-in benchmarking system Integrated thermal watchdog 300+ Hash-types implemented with performance in mind ... and much more GPU Driver requirements: AMD GPUs on Linux require "RadeonOpenCompute (ROCm)" Software Platform (3.1 or later) AMD GPUs on Windows require "AMD Radeon Adrenalin 2020 Edition" (20.2.2 or later) Intel CPUs require "OpenCL Runtime for Intel Core and Intel Xeon Processors" (16.1.1 or later) NVIDIA GPUs require "NVIDIA Driver" (440.64 or later) and "CUDA Toolkit" (9.0 or later) Algorithms MD4 MD5 SHA1 SHA2-224 SHA2-256 SHA2-384 SHA2-512 SHA3-224 SHA3-256 SHA3-384 SHA3-512 RIPEMD-160 ... |
|
2,619 | Sep 16, 2022 hashcat <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/hashcat1_th.png"border="0"> |
|
Hashing v2.1 Hashing v2.1 Simple utility to calculate and compare hashes of multiple files Features: MD5, SHA1, SHA256, SHA384, SHA512, CRC32 and RIPEMD160 algorithms supported Choose which hashes you want to calculate Compare and group identical files together Compare multiple files against hash sums Open in VirusTotal (works only SHA256) Drag n' drop any number of files and folder Option to save hashes in JSON files Option for analyzing JSON files Option for lower character casing Option for decimal CRC32 Process high priority support Tray icon support Option to stay always on top Single-instance support Compatibility: .NET Framework 4.5.2 Compatible with Windows 7, 8, 8.1, 10 Does not work with Windows XP or Vista Click here to visit the author's website. |
|
4,283 | Jan 30, 2020 hellzerg <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/Hashing1_th.png"border="0"> |
|
HashMyFiles v2.44 HashMyFiles v2.44 Calculate MD5/SHA1/CRC32 hashes of your files. HashMyFiles is small utility that allows you to calculate the MD5 and SHA1 hashes of one or more files in your system. You can easily copy the MD5/SHA1 hashes list into the clipboard, or save them into text/html/xml file. HashMyFiles can also be launched from the context menu of Windows Explorer, and display the MD5/SHA1 hashes of the selected file or folder. System Requirements: This utility works on Windows 2000/XP/2003/Vista/Windows 7/Windows 8/Windows 10/Windows 11. Older versions of Windows are not supported. Changes: Version 2.44: You can now send the hash data to stdout by specifying empty string as filename, for example: HashMyFiles.exe /File "C:\Temp\*.*" /scomma "" | more Using HashMyFiles: HashMyFiles doesn't require any installation process or additional DLL files. In order to start using it, simply run the executable file (HashMyFiles.exe). After you run it, you can add files and folders that you want to view their MD5/SHA1 hashes. You can do it by using the 'Add File' and 'Add Folder' options under the File menu, or simply by draging the files and folder from Explorer into the main window of HashMyFiles. After adding the desired files, you can copy the MD5/SHA1 hashes to the clipboard, or save the hashes list into text/html/xml file. Explorer Context Menu: HashMyFiles can also be used directly from Windows Explorer. In order to enable this feature, go to the Options menu, and choose the 'Enable Explorer Context Menu' option. After you enable this feature, you can right-click on any file or folder on Windows Explorer, and choose the 'HashMyFiles' item from the menu. If you run the HashMyFiles option for a folder, it'll display the hashes for all files in the selected folder. If you run the HashMyFiles option for a single file, it'll display only the hashes ... |
|
8,856 | Aug 08, 2023 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/hashmyfiles_th.png"border="0"> |
|
Hasleo Windows ISO Downloader v1.5 Hasleo Windows ISO Downloader v1.5 Free software to download Windows 8.1/10/11 installation ISOs from Microsoft's official website • Download Windows 11/10/8.1 Installation ISO from Microsoft's Official Website (Improved) • Allows copying the download link and downloading using a third-party download tool • Small size and no installation required • Simple and easy to use • Completely free • Compatible with Windows Vista or later operating systems Step 1. Download and unzip, and then run the program. Step 2. Please select the version of the Windows installation ISO you want to download as needed, then click the "Download" button and specify a save path for the ISO file. Notes: Since the download address of the Windows installation ISO for different versions and languages is different, the program needs to obtain the download information form from Microsoft's official website after changing the version and language. Step 3. The program starts downloading the selected Windows ISO file, the download time depends on your network environment, so please be patient. Notes: You can copy the download link and then use a third-party downloader to download the ISO file, please note that the download link is only valid for 24 hours. Step 4. The download of the Windows installation ISO is complete. After the operation of downloading the Windows installation ISO is successfully completed, you can create a Windows installation USB flash drive using Rufus. Click here to visit the author's website. |
|
3,597 | Jan 27, 2023 Hasleo Software <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/hasleowinisodownload3_th.png"border="0"> |
|
HDClone X.2 Free Edition v11.0.8 HDClone X.2 Free Edition v11.0.8 The Universal Cloning Tool HDClone creates physical or logical copies (clones) and file images of hard disks and other mass storage media. HDClone is the perfect tool for backups and for creating copies of entire software or operating system installations. A special SafeRescue mode makes HDClone an invaluable tool for rescuing defective hard disks and other media. HDClone works independent of partitioning scheme, file system and operating system. It also works with proprietary formats which would otherwise be inaccessible. HDClone X.2 is the legitimate successor of HDClone X. Thislatest version of HDClone is a seamless continuation of itssuccessful predecessor HDClone X, which is why we chose toname it X.2. This does not mean that HDClone X.2 is a sub-release of HDClone X, but instead the namereflects thatHDClone X.2 is the result of having taken HDClone X to thenext level. This is also evident by the list of new features. Wehave consistently advanced the development of HDClone in allaspects. Aside from the main features, we have improved uponmany details in order to make HDClone even easier and moreefficient to use. Once again, these improvements were alsoaided by the ideas and suggestions that we welcomed from theHDClone community. In addition to the nine existing HDClone language versions English, German, French, Italian, Spanish,Portuguese, Polish, Russian and Turkish, HDClone X.2 is now also available in Traditional Chinese and Simplified Chinese. This expansion of our language version lineup is our response to the steadily growing worldwide popularity of our products, especially HDClone, which is evidenced by our customers in 169 countries.What’s New?HDClone X.2 comes with two completely new apps – ResumeImage for data rescue, specifically when it comes to disks with thermal issues, and DirectCopy, which can create fast (SmartCopy) 1:1 copies. In addition, six apps have been significantly improved. With ... |
|
2,536 | Jun 24, 2021 Miray <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/HDClone1_th.png"border="0"> |
|
Hekasoft Backup and Restore v0.96 Hekasoft Backup and Restore v0.96 The completely free solution for your web browser and other software's backup and management. Hekasoft Backup and Restore is an all-in-one solution to manage your browser data and settings. Backup your favorite browser’s settings in a single file that you can store on external drive or cd-rom and use it to restore the profile. Hekasoft Backup and Restore doesn’t limit you to only backing up your software, you can also migrate your profile from a browser to another and you can optimize your profile folder removing useless files. 41 Supported Programs Hekasoft Backup and Restore can backup the profile folder of the major browsers available for Windows, it’s an all-in-1 solution for your backup needs. With every update the software supported list grows. Supported Programs List Chrome (Chromium) based browsers Brave CCleaner Browser CentBrowser CocCoc Browser Comodo Dragon Epic Privacy Browser Google Chrome Google Chrome Canary Iridium Browser Microsoft Edge Microsoft Edge Beta Microsoft Edge Canary Naver Whale Opera Slimjet SRWare Iron UR Browser Vivaldi Yandex Firefox (Gecko) based browsers Basilisk Comodo IceDragon Falkon K-Meleon LibreWolf Midori Mozilla Firefox Mozilla SeaMonkey PaleMoon Tor Browser Waterfox Other browsers Lunascape Maxthon 3/4 Cloud Mail Clients eM Client Mozilla Thunderbird OE Classic ... |
|
4,754 | Jan 08, 2024 Hekasoft <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/hekasoftbackuprestore2_th.png"border="0"> |
|
HELIUM PINGer v0.97 HELIUM PINGer v0.97 A fast, lightweight, portable PING tool. Network checking by PING services (one time or nonstop) managing with IP list (creating and storing) multithreads technology for pinging DNS and Reverse DNS support single TraceRoute share open, www open |
|
4,934 | Mar 24, 2019 HELIUM PINGer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/HELIUM PINGer1_th.png"border="0"> |
|
HexChat 2.14.2 64bit HexChat v2.14.2 64bit HexChat is an IRC client based on XChat, but unlike XChat it’s completely free for both Windows and Unix-like systems. Since XChat is open source, it’s perfectly legal. HexChat was originally called XChat-WDK which in turn was a successor of freakschat. Features Easy to use and customizable interface Cross-platform on Windows, OS X, and Unix-like OSes Highly scriptable with Lua, Python, and Perl Translated in multiple languages Fully open source and actively developed Multi-network with auto-connect, join, and identify Spellcheck, Proxies, SASL, DCC support and more 2.14.2 (2018-08-29) remove shift+click binding to close tabs re-add option to build against legacy perl add appstream metainfo for plugins add build option to set perl binary add option to build without appstream fix not unminimizing when restoring from tray fix translations containing invalid text events fix server passwords starting with : update libraries on windows, fixing CVE-2018-15120 (and emoji!) Hashes: 7b9cbadb5754dd7fae7805b2d2a842db3eec538cfd23f0b914f3c6747dbabbde HexChat 2.14.2 x64.exe bebe618289353573dcb8dff0e90053a0705a08847f054b5837d587263582c99a HexChat 2.14.2 x86.exe Click here to visit the author's website. |
|
4,678 | Dec 05, 2019 HexChat <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/HexChat1_th.png"border="0"> |
|
HexChat v2.14.2 32bit HexChat v2.14.2 32bit HexChat is an IRC client based on XChat, but unlike XChat it’s completely free for both Windows and Unix-like systems. Since XChat is open source, it’s perfectly legal. HexChat was originally called XChat-WDK which in turn was a successor of freakschat. Features Easy to use and customizable interface Cross-platform on Windows, OS X, and Unix-like OSes Highly scriptable with Lua, Python, and Perl Translated in multiple languages Fully open source and actively developed Multi-network with auto-connect, join, and identify Spellcheck, Proxies, SASL, DCC support and more 2.14.2 (2018-08-29) remove shift+click binding to close tabs re-add option to build against legacy perl add appstream metainfo for plugins add build option to set perl binary add option to build without appstream fix not unminimizing when restoring from tray fix translations containing invalid text events fix server passwords starting with : update libraries on windows, fixing CVE-2018-15120 (and emoji!) Hashes: 7b9cbadb5754dd7fae7805b2d2a842db3eec538cfd23f0b914f3c6747dbabbde HexChat 2.14.2 x64.exe bebe618289353573dcb8dff0e90053a0705a08847f054b5837d587263582c99a HexChat 2.14.2 x86.exe Click here to visit the author's website. |
|
4,673 | Dec 05, 2019 HexChat <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/HexChat1_th.png"border="0"> |
|
HFS (Http File Server) v2.5 Due to the nature of this program, a few antivirus programs may hit on this as malware. This is a false positive. The file is safe. HFS (Http File Server) v2.5 HFS (Http File Server) is file sharing software which allows you to send and receive files over HTTP. You can limit this sharing to just a few friends, or be open to the whole world. HFS is different from classic file sharing because there is no network. HFS is a web server which uses web technology to be more compatible with today's Internet. Since it is actually a web server, your friends can download files as if they were downloading from a website using a web browser, such as Internet Explorer or Firefox. Your users don't have to install any new software. HFS is designed to let you easily share files. Most web servers are used to publish a website. While HFS is fully capable of this, it is not designed to do so. You are free to use HFS in any way you wish, but at your own risk. Installation HFS needs no installation. Just put the "hfs.exe" file in a folder of your choice (perhaps named HFS), and run it. The first time it runs, you are prompted to see if you wish to integrate it into the context menu. If you pick "yes", then in Window's Explorer you can simply right-click on a file to add it to HFS (and make it downloadable). (This option can also be accessed after installation in Menu→Other options→Shell context menu.) Basic instructions HFS really is very easy to use. * Run "HFS.exe". * In the window (left-pane), drag&drop all the elements to share. * Communicate to your friends the address of the items to download. After you drag&drop the files, the address (ie. ... |
|
4,474 | Dec 20, 2019 rejetto.com <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/HFS3_th.png"border="0"> |
|
Hidden Utilities XP v1.0 Hidden Utilities XP v1.0 Hidden Utilities XP allows access to nearly 100 hidden utilities that are not normally accessible to the average user in Windows XP. System information, diagnostics, repair tools and more in both Windows and Command Line utilities are now easily opened. Hidden Utilities XP includes easy access to 53 Windows tools and 43 Command Line utilities. Click here to visit the author's website. |
|
3,931 | Jul 01, 2019 Camtech 2000 <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/HiddenXP_th.png"border="0"> |
|
Hiren’s BootCD 15.1 (Classic) Hiren’s BootCD 15.1 (Classic) All in One Bootable CD which has all these utilities Antivirus Tools Avira AntiVir Personal (07-12-2011): Free anti-virus and anti-spyware on-demand scanner, detects and removes more than 50000 viruses and trojans (Windows Freeware). ClamWin Free Antivirus 0.97.3 (07-12-2011): A free antivirus, GNU GPL Open Source Virus Scanner (Windows Freeware). ComboFix (07-12-2011): Designed to cleanup malware infections and restore settings modified by malware (Windows Freeware). Dr.Web CureIt! Antivirus: A free standalone anti-virus and anti-spyware on-demand scanner (downloadable) (Windows Freeware). GMER 1.0.15: Hidden services, hidden registry, hidden file scanner, Rootkit Detector and Remover (Windows Freeware). Malwarebytes Anti-Malware 1.51.1 (07-12-2011): Anti-malware application that can thoroughly remove even the most advanced malware (Windows Freeware). Remove Fake Antivirus 1.82: A tool to remove virus/malware which disguises itself to be an antivirus and produces fake alert/warnings and urge you to purchase a useless copy of the fake antivirus (Windows Freeware). RootkitRevealer 1.7.1: Rootkit Revealer is an advanced patent-pending root kit detection utility (Windows Freeware). Spybot: Search & Destroy 1.6.2 (07-12-2011): Application to scan for spyware, adware, hijackers and other malicious software (Windows Freeware). SuperAntispyware 5.0.1134 (07-12-2011): Remove Adware, Malware, Parasites, Rootkits, Spyware, Trojan, and Worms (a must have tool) (Windows Freeware). TDSSKiller 2.6.21.0: To remove malware belonging to the family Rootkit.Win32.TDSS aka Tidserv, TDSServ and Alureon (Windows Freeware). Backup Tools CloneDisk 1.9.6: All in one tool for MBR, Partition, Disk, VMWare Disk images vmdk/vmx/vhd, and much more (Windows Freeware). COPYR.DMA Build013: A Tool for making copies of hard disks with bad sectors (Dos Freeware). CopyWipe 1.14: Copy old hard drive to a ... |
|
13,661 | Mar 14, 2019 Hirems <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/hirensbootcd_th.png"border="0"> |
|
HolyServices v1.0.0.37 HolyServices v1.0.0.37 A planning calendar for scheduling holy services at small parishes. Synchronizes with GoogleCalendar so as to be able to collaborate with mobile devices. Features Google calendar synchronization collaboration with locatechurch.appspot.com web service iCal export all language encodings proven by usage This download is for the Windows version. If you need the Linux Debian version, download here. Changes: v1.0.0.37 handle correctly NULL characters in intention texts, they disturbed OpenOffice export in older Linuxes like Ubuntu 18 Click here to visit the author's website. |
|
4,901 | Jan 15, 2021 kovis <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/HolyServices3_th.png"border="0"> |
|
Homedale v2.09 Homedale v2.09 Wi-Fi / WLAN Monitor With Homedale you can scan for Wi-Fi / WLAN Access Points and monitor their signal strength. The details windows shows all ‘Information elements’ and their decoded data. Use the detected access points with Google Geolocation, Mozilla Location Service and Open WLAN Map Service to locate yourself. It works with 802.11a/b/g/n/ac wireless networks in the 2.4 GHz and 5 GHz frequency bands using 20, 40, 80 and 160 MHz width channels. Details See an overview of all available access points with their signal strength, security [WEP/WPA/WPA2], network name (SSID), BSSID, vendor based on MAC address, channel, supported data rates and much more. Details from information elements (IE) advertised by the access points are parsed and shown. Signal Strength You can also monitor the signal strength of selected access points in a graph over the time. With a right mouse click, you can start logging to a text file and create a screenshot. Frequency Usage See the usage of all Wi-Fi channels and find the optimal channel for your access point. Connect Make a right mouse click to connect and disconnect from a Wi-Fi / WLAN access point. The blue icon shows the currently connected access point. Changes: Windows Version 2.09 1-4-24 New: Grouping by MAC addresses added, oui.txt loading working again and 28 + 36 bit support for oui.txt added History macOS Version 1.17 1-3-24 New: Crash prevented History Supported Languages: English French German Greek Norwegian Polish Portuguese Russian Simplified Chinese Slovenian Swedish Traditional Chinese Ukrainian Command line options: /n <0/1/2> 0: Do not use ndis [default for >=Vista], 1: Use ndis [default for <=XP], 2: Use ndis exclusively /r <x> Refresh after x milli seconds /s <ssid1,…> Log only specified ssid's /m <12-34-56-78-90-ab,…> Log only specified bssid's /l <file name> Enable logging to specified file name /d Append to existing log file instead of deleting it first /e Log all access points /c Use , for log file instead of tab /f <filter> Filter access points for display ... |
|
4,090 | Jan 07, 2024 The SZ Development <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/Homedale3_th.png"border="0"> |
|
Honeywell Euroboard keyboard Honeywell _ Netropa RT9258TW The Multi-function keyboard drivers are version 2.00 and work with Win9x, NT, Win2000 and WinMe. Extract the zip file and run setup.exe, it\'s that easy! |
|
8,528 | Jul 16, 2010 Honeywell |
|
Hornil StylePix 1.14.2.0 Hornil StylePix 1.14.2.0 Hornil StylePix, or simply StylePix, is a graphics editing program with a number of advanced features. Stylepix is an acronym for "Style Pictures". This means your pictures with nice style. Hornil StylePix has intuitive user interface. It is designed to control the selected functions easy and conveniently. Even if you have no experience, you can easily learn how to edit image and retouching your photos. As a result, Hornil StylePix´s intuitive UI reduces your time to work. To better speed editing, Hornil StylePix is designed to focus on light and powerful. We are always striving to improve the performance of Hornil StylePix. Hornil StylePix runs on fewer resources environment such as Net-books and laptop computer or virtual machines(vmware, virtual box, virtual pc and etc.) with full image handling features. Features: Convenient working environment png, jpg, bmp, tif, gif, tga file formats are supported Working with multiple files can be opened simultaneously Multi-level undo-redo support, and action list display Zoom in/out and the full-screen view and guides, rulers, grid support Thumbnail, histogram and waveform view for current editing image StylePix own file format(.tsp) support Variety selection tools Auto-range, color-range, and rectangular, circular, polygonal, lasso area selection, and transformation options Variety of drawing tools Brush, eraser, spray, clone-brush, lines, rectangles, circles Multi-line text editing Flood fill and gradient fill support 20 kinds of blending modes Color picker with HSV color model Review and convenient image viewing Folder explorer and thumbnail view supports Full-screen slide show Browse tool Batch processing Rename, resize, rotate, and apply filters for multiple files Image transformation tools Rotate, flip Crop tool Free transform tool Correction-restore and enhancement tools Dust removal, Red-eye removal tools Lighten, darken, blur, and sharpen tools 30 kinds of practical image filter Color adjustment filters Sharpen and blur filters Mosaic, noise filters Style Filter Rendering filters Morphological filters Noise filters Distort filters Convolve filters Photo Enhancement filters Multi-layer support Multi-layer editing, and group support 30 kinds of blending modes and transparency for each layers Change desktop background |
|
8,161 | Feb 06, 2014 Hornil Co. |
|
HostedNetworkStarter v1.15 HostedNetworkStarter v1.15 HostedNetworkStarter is a simple tool for Windows 7 and later that allows you to easily create a wifi hotspot with your wireless network adapter, using the Wifi hosted network feature of Windows operating system. With the wifi hotspot created by this tool, you can allow any device with wifi support to access the network and the Internet connection available in your computer. System Requirements Any version of Windows, starting from Windows 7 and up to Windows 10, 32-bit or 64-bit systems. (In older versions of Windows, there is no support for Wifi hosted network) Wireless network adapter that supports Wifi hosted network. Known Issues hnetcfg.dll Crash - On some Windows 10 systems, HostedNetworkStarter crashes when trying to start the hosted network. The crash occurs inside hnetcfg.dll while HostedNetworkStarter requests to disable previous ICS (Internet Connection Sharing) settings in order to set ICS for the hosted network. It's unclear whether this crash occurs because HostedNetworkStarter does something wrong or it's some kind of bug in ICS component of Windows 10. Some people reported that this crash started to appear after installing Windows 10 Anniversary Update. Versions History Version 1.15: You can use any variable inside HostedNetworkStarter.cfg as a command-line parameter in order to change the settings of HostedNetworkStarter, for example: HostedNetworkStarter.exe /NetworkSSID "MyNetwork" /NetworkKey "fh78fh8f#" Start Using HostedNetworkStarter HostedNetworkStarter doesn't require any installation process or additional DLL files. In order to start using it, simply run the executable file - HostedNetworkStarter.exe After running HostedNetworkStarter, the 'Hosted Network Options' window is opened, allowing you to choose the desired configuration of your Wifi hotspot. After filling the network name ,the network key, and choosing the desired Internet connection ... |
|
5,429 | Sep 08, 2018 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/hostednetworkstarter1_th.png"border="0"> |
|
Hosts File Editor+ v.1.5.10 Hosts File Editor+ v.1.5.10 The program allows editing hosts file. Requirements: Microsoft .NET Framework 4.0 Client Profile ------------------------------------------------ SUPPORTED OPERATING SYSTEMS (x32, x64): ------------------------------------------------ Microsoft Windows XP SP2 or SP3 ; Microsoft Windows Server 2003 Microsoft Windows Vista ; Microsoft Windows Server 2008 Microsoft Windows 7 ; Microsoft Windows Server 2008 R2 Microsoft Windows 8 ; Microsoft Windows Server 2012 Microsoft Windows 8.1 ; Microsoft Windows 8.1 With update Microsoft Windows Server 2012 R2 ; Microsoft Windows 10 ; Microsoft Windows Server 2016 The program is free. No need to install, just run the application. Additional Tools of this program: ---------------------------------------------- - | Windows Additional Tools | - (for users Windows 7, as and newer Windows OS): - (Enable / Disable Windows Update). - (Clean Windows Update History...). - (Enable / Disable Windows Firewall). - (Create Rules in Windows Firewall...). - (Enable / Disable Windows Defender...). - (Enable / Disable Hibernate...). - (Enable / Disable Windows Security Center...). - (Enable / Disable UAC). - (Temp File Cleaner (Clean: C:/Windows/Temp; C:/User/UserName/AppData/Local/Temp; C:/Windows/Prefetch and Recent items). - (Delete System Restore points). - (Block run certain Applications). The basic functions of this program: ------------------------------------------------ - Set DNS Servers (Tools/ Set DNS Servers). - Set Proxy settings (Tools/ Proxy Setings). - Change Network MAC Address - ... |
|
5,572 | Mar 31, 2020 Nebojša Vučinić - Trebinje <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/Hosts File Editor+1_th.png"border="0"> |
|
hostsmgr v2.1.1 hostsmgr v2.1.1 Console tool for sysadmins and other people who need to autoupdate "hosts" file. Command line -path - output file location (def: ".\hosts") -ip - ip address to be set as resolver (def: "0.0.0.0") -os - new line format; "win", "linux" or "mac" (def: "win") -nobackup - do not create backup for output file (opt.) -noresolve - do not set resolver, just generate hosts list (opt.) -nocache - do not use cache files, load directly from internet (opt.) GPG Signature Binaries have GPG signature hostsmgr.sig in application folder. Public key: pubkey.asc (ha.pool.sks-keyservers.net) Key ID: 0x5635B5FD Fingerprint: D985 2361 1524 AB29 BE73 30AC 2881 20A7 5635 B5FD v2.1.1 (8 June 2021) fixed excluded hosts hashing updated project sdk Other assets: hostsmgr-2.1.1-pdb.zip hostsmgr-2.1.1.sha256 Click here to visit the author's website. |
|
4,242 | Jul 16, 2021 Henry++ <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/hostsmgr_th.png"border="0"> |
|
HotkeyP v4.10 HotkeyP v4.10 Assign a keyboard shortcut or a mouse shortcut to any executable file, document, folder or web page. You can also use all multimedia keys, the fourth and fifth mouse buttons and a remote control (if you install WinLIRC). Other commands are: change keys in other applications, shutdown, restart, lock computer, start a screen saver, change the desktop resolution, set window opacity, audio volume, set process priorities, terminate applications, eject CD, set CD speed, show disk free space, empty the recycle bin, delete temporary files, change desktop wallpaper, save/restore desktop icons positions, minimize any application to the system tray, hide window, change window transparency, zoom tool, screenshot to BMP file, set window always on top, paste date/time or any text, and more. See the help page for more info. Changes: v4.10 (2023-05-28) - maximal length of hotkey parameters increased to 65535 - command "Paste text" can paste a registry value - "Enable multiple instances" is always enabled for explorer.exe - winmm.dll is loaded only if needed - help has a content - renamed "Suspend" to "Sleep/Suspend" - renamed "Monitor power off" to "Display power off" This download is for the 64bit version. If you need the 32bit version, download here. Click here to visit the author's website. |
|
3,100 | May 30, 2023 Petr Lastovicka <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/HotkeyP1_th.png"border="0"> |
|
HotShots v2.2.0 HotShots v2.2.0 HotShots is an application for capturing screens and saving them in a variety of image formats as well as adding annotations and graphical data (arrows, lines, texts, ...). Version 2.2.0 * Features - Restore last selection in region and freehand grabbing - Add options to display or not dialog before/after download Click here to visit the author's website. |
|
8,203 | Jul 02, 2020 xbee <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/editorjpg_th.png"border="0"> |
|
HotSwap! 6.2.0.0 HotSwap! 6.2.0.0 This program turns a SATA hard drive into a hot swap hard drive. It does the same thing as you can remove device from Device Manager but it provides much friendly user interface as you remove the removable device from the "Safely Remove Hardware" icon in the notification area. It also ensures that all data are written and flushed to the disk before the device to be hot-swapped, so you can use SATA/eSATA drive as a removable device much alike USB/IEEE1394 drive. Supported Hardware and OS Windows Vista / 7 / Server 2008 / 8 / 10 (32-bit and 64-bit) SATA Host Controller (AHCI mode enabled in BIOS) (e.g. Intel Controller Hub (ICH), JMicron JMB363) Silicon Image SATA Host Controller (SiI3112A, SiI3114, SiI3132, etc) Silicon Image SATA-PATA (Parallel ATA) Bridge Controller (SiI3611) If Silicon Image controller is used, the driver will spin-down the drive upon device removable. Directions for use Extract the downloaded file and run HotSwap!.EXE, the icon will appear in the notification area. The program will automatically start up when user logs on. Left click the icon, a menu will pop up listing drives. To remove a drive, select the drive from the popup menu. A balloon will pop up saying that the device is safely hot-swapped and you can power off the drive to remove it from the system. The drive listed in grey is either selected as non-hotswap device or in use by Windows therefore cannot be removed. Left click the icon while pressing Ctrl key, another menu will pop up and you can select a drive. Once the drive is selected in this menu, it won't appear in the drive listing menu. Right click the icon, the configuration menu will pop up. Configuration Menu Scan for hardware changes Does the same thing as you can do on Device Manager. This ... |
|
4,990 | Apr 08, 2017 Kazuyuki Nakayama <img src="http://www.oldergeeks.com/downloads/gallery/thumbs/HotSwap5_th.png"border="0"> |
|
HP Linux Imaging and Printing v3.21.12 HP Linux Imaging and Printing v3.21.12 n HP developed solution for printing, scanning, and faxing with HP inkjet and laser based printers in Linux. The HP Linux Imaging and Printing (HPLIP) project provides printing support for 3138 printer models--including; Deskjet, Officejet, Photosmart, PSC (Print, Scan, Copy), Business Inkjet, LaserJet, Edgeline MFP, and LaserJet MFP. Note: HPLIP is free, open source software distributed under the MIT, BSD, and GPL licenses. Note: Most HP models are supported, but a few are not. See Supported Devices at the HPLIP website for more information: https://developers.hp.com/hp-linux-imaging-and-printing/supported_devices/index HPLIP Software does NOT support either Windows or OS X operating systems. Changes: HPLIP 3.21.12- This release has the following changes: Added support for following new Distro's: MX Linux 21 Elementary OS 6 Fedora 35 This download is for the .run (installer) version. All other download assets are below: hplip-3.21.12.run.asc hplip-3.21.12.tar.gz hplip-3.21.12.tar.gz.asc IMPORTANT: For this type of file (.run), you must right-click on the download link below and choose to save the link. Click here to visit the author's website. |
|
2,446 | Dec 17, 2021 HP Developers <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/HPLinux1_th.png"border="0"> |
|
HTTPNetworkSniffer v1.63 32bit HTTPNetworkSniffer v1.63 32bit HTTPNetworkSniffer is a packet sniffer tool that captures all HTTP requests/responses sent between the Web browser and the Web server and displays them in a simple table. For every HTTP request, the following information is displayed: Host Name, HTTP method (GET, POST, HEAD), URL Path, User Agent, Response Code, Response String, Content Type, Referer, Content Encoding, Transfer Encoding, Server Name, Content Length, Cookie String, and more... You can easily select one or more HTTP information lines, and then export them to text/html/xml/csv file or copy them to the clipboard and then paste them into Excel. System Requirements This utility works on any version of Windows, starting from Windows 2000 and up to Windows 10, including 64-bit systems. One of the following capture drivers is required to use HTTPNetworkSniffer: WinPcap Capture Driver: WinPcap is an open source capture driver that allows you to capture network packets on any version of Windows. You can download and install the WinPcap driver from this Web page. Microsoft Network Monitor Driver version 2.x (Only for Windows 2000/XP/2003): Microsoft provides a free capture driver under Windows 2000/XP/2003 that can be used by HTTPNetworkSniffer, but this driver is not installed by default, and you have to manually install it, by using one of the following options: Option 1: Install it from the CD-ROM of Windows 2000/XP according to the instructions in Microsoft Web site Option 2 (XP Only) : Download and install the Windows XP Service Pack 2 Support Tools. One of the tools in this package is netcap.exe. When you run ... |
|
8,293 | Dec 06, 2019 Nirsoft <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/httpnetworksniffer_th.png"border="0"> |
|
HTTPNetworkSniffer v1.63 64bit HTTPNetworkSniffer v1.63 64bit HTTPNetworkSniffer is a packet sniffer tool that captures all HTTP requests/responses sent between the Web browser and the Web server and displays them in a simple table. For every HTTP request, the following information is displayed: Host Name, HTTP method (GET, POST, HEAD), URL Path, User Agent, Response Code, Response String, Content Type, Referer, Content Encoding, Transfer Encoding, Server Name, Content Length, Cookie String, and more... You can easily select one or more HTTP information lines, and then export them to text/html/xml/csv file or copy them to the clipboard and then paste them into Excel. System Requirements This utility works on any version of Windows, starting from Windows 2000 and up to Windows 10, including 64-bit systems. One of the following capture drivers is required to use HTTPNetworkSniffer: WinPcap Capture Driver: WinPcap is an open source capture driver that allows you to capture network packets on any version of Windows. You can download and install the WinPcap driver from this Web page. Microsoft Network Monitor Driver version 2.x (Only for Windows 2000/XP/2003): Microsoft provides a free capture driver under Windows 2000/XP/2003 that can be used by HTTPNetworkSniffer, but this driver is not installed by default, and you have to manually install it, by using one of the following options: Option 1: Install it from the CD-ROM of Windows 2000/XP according to the instructions in Microsoft Web site Option 2 (XP Only) : Download and install the Windows XP Service Pack 2 Support Tools. One of the tools in this package is netcap.exe. When you run ... |
|
8,391 | Dec 06, 2019 Nirsoft <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/httpnetworksniffer_th.png"border="0"> |
|
Hugin v2023.0.0 Hugin v2023.0.0 Panorama photo stitcher With Hugin you can assemble a mosaic of photographs into a complete immersive panorama, stitch any series of overlapping pictures and much more. Languages Brazilian Portuguese, Bulgarian, Catalan, Chinese Simplified, Chinese Traditional, Czech, Dutch, Danish, English, French, German, Hungarian, Italian, Japanese, Korean, Polish, Russian, Slovakian, Slovenian, Spanish, Swedish and Ukranian. This download is for the Windows version. If you need the MacOS version (older), download here. If you need the Linux/MacOS tarball version (newer), download here. Click here to visit the author's website. |
|
4,007 | Mar 25, 2024 Hugin Project <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/Hugin2_th.png"border="0"> |
|
HxC Floppy Drive Emulator v2.5.6.6 HxC Floppy Drive Emulator v2.5.6.6 The aim of HxC Floppy Emulator project is to provide software and hardware solutions to replace old floppy disk drives and floppy support with modern solutions (USB, SDCard, network,...) Features Import and convert many floppy image file formats. Import, analyze and convert of stream files images. Create/Browse DOS and AmigaDOS floppy images. Create floppy disk images with custom sector layout. Low level track and disk inspection. Floppy disk read function. HxC Floppy Emulators supported machines/compatibility list Machine / System types : CNC Machines HxC Floppy Emulators compatibility list. Test/measurement/misc instrumentation HxC Floppy Emulators compatibility list. Music keyboards/synths/samplers HxC Floppy Emulators compatibility list. Computers & gaming systems HxC Floppy Emulators compatibility list. Click here to visit the author's website. |
|
2,111 | Sep 09, 2021 Jean-François DEL NERO <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/HxCFloppy1_th.png"border="0"> |
|
HxD v2.4.0.0 HxD v2.4.0.0 Freeware Hex Editor and Disk Editor. HxD is a carefully designed and fast hex editor which, additionally to raw disk editing and modifying of main memory (RAM), handles files of any size. The easy to use interface offers features such as searching and replacing, exporting, checksums/digests, insertion of byte patterns, a file shredder, concatenation or splitting of files, statistics and much more. Editing works like in a text editor with a focus on a simple and task-oriented operation, as such functions were streamlined to hide differences that are purely technical. For example, drives and memory are presented similar to a file and are shown as a whole, in contrast to a sector/region-limited view that cuts off data which potentially belongs together. Drives and memory can be edited the same way as a regular file including support for undo. In addition memory-sections define a foldable region and inaccessible sections are hidden by default. Furthermore a lot of effort was put into making operations fast and efficient, instead of forcing you to use specialized functions for technical reasons or arbitrarily limiting file sizes. This includes a responsive interface and progress indicators for lengthy operations. Features Available as a portable and installable edition RAM-Editor To edit the main memory Memory sections are tagged with data-folds Disk-Editor (Hard disks, floppy disks, ZIP-disks, USB flash drives, CDs, ...) RAW reading and writing of disks and drives for Win9x, WinNT and higher Instant opening regardless of file-size Up to 8EB; opening and editing is very fast Liberal but safe ... |
|
4,825 | Nov 20, 2020 Maël Hörz <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/HxD1_th.png"border="0"> |
|
IconMaker 1.4 IconMaker 1.4 Icon Maker can be used to quickly and easily create 32-bit color icons from images that already contain alpha information. All sizes from 16x16 to 256x256 PNG icons are supported. Currently, Icon Maker only supports writing 32-bit icons; any format image may be imported, but icons will always be saved in 32-bit color with an alpha channel. Requires .NET 3.5 and Windows XP SP3 or later. Installation No installation is necessary. The zip file will contain the only .exe needed to run Icon Maker. Icon Maker requires .NET 3.5 and Windows XP SP3 or later. |
|
4,921 | Aug 21, 2017 Inedo <img src="http://www.oldergeeks.com/downloads/gallery/thumbs/IconMaker1_th.png"border="0"> |
|
Icons from File v5.1.1 Icons from File v5.1.1 Icons from File is a free tool for extracting icons or icon arrays from files (EXE, DLL, OCX etc.) with the ability to scan folders and search for EXE, DLL, and OCX files, which contain icons. Extracted icons can be saved (exported) to a file: - All or selected icon to ICO, BMP, JPEG, GIF, PNG, or EMF files; - All icons as a BMP, JPEG, GIF, PNG, or EMF file. All of the icons from the selected files may also be extracted and saved to a selected folder in a step or exported to a HTML document (.htm, .html) or dBase 5 file (.dbf). Export operations may also be performed via the command line. Extracted icons may be printed (all or selected). The program is optionally portable. Click here to visit the author's website. |
|
5,029 | Feb 05, 2020 Vitaliy Levchenko Software <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/iconsfromfile1_th.png"border="0"> |
|
iCopy 1.6.3 iCopy 1.6.3 iCopy is a free Windows application that lets you combine your scanner and printer into a powerful copy machine. With a single click, you can directly print your copies or save them to image or PDF files. Fast. Simple. Free. You can run iCopy by just pressing the button of your scanner!! Its simple user interface lets you manage scanner and printer options, like brightness, contrast, number of copies in a couple of seconds. You can save images to file or export to PDF without the need of other software! iCopy is small and no installation is required.And, most importantly, it is free and opensource! Image Settings iCopy lets you control various settings with a few clicks, including Scaling, Resolution, Brightness and Contrast Document Feeders iCopy supports Automatic Document Feeders, so that you can copy a large amount of pages automatically Create PDFs iCopy can save your acquired pages to PDF, without the need of other software Other Features Scanning mode selection Scan to file function Scan Multiple Pages before printing Preview function Scaling by percentage function No installation needed Little hard disk space required Compatible with all WIA scanners and all printers Command line parameters System requirements Microsoft Windows XP SP or newer, Microsoft Windows Server 2003 or newer Microsoft .NET Framework 2.0 or higher A WIA (Windows Image Acquisition) compatible scanner (mostly all scanners A printer |
|
5,398 | Oct 23, 2019 iCopy <img src="http://www.oldergeeks.com/downloads/gallery/thumbs/icopy1_th.png"border="0"> |
|
IECookiesView v1.73 IECookiesView is a small utility that displays the details of all cookies that Internet Explorer stores on your computer. In addition, It allows you to do the following actions: * Sort the cookies list by any column you want, by clicking the column header. A second click sorts the column in descending order. * Find a cookie in the list by specifying the name of the Web site. * Select and delete the unwanted cookies. * Save the cookies to a readable text file. * Copy cookie information into the clipboard. * Automatically refresh the cookies list when a Web site sends you a cookie. * Display the cookies of other users and from other computers. * Open the IECookiesView utility directly from Internet Explorer toolbar. * Change the content of a cookie ! * Export your cookies to Netscape/Mozilla cookies file. * Block specific Web sites from using cookies through the cookies blocking mechanism of Internet Explorer 6.0. |
|
8,434 | Nov 15, 2008 Copyright (c) 2002 - 2008 Nir Sofer |
|
Image Analyzer v1.43 Image Analyzer v1.43 Advanced image editing, enhancement and analysis software. The program contains both most image enhancement features found in conventional image editors plus a number of advanced features not even available in professional photo suites. Features • Automatic brightness, contrast, gamma and saturation adjustment • Build-in conventional and adaptive filters for noise reduction, edge extraction etc. • Retouch tools including clone, spot healing and warping brushes • Basic support for layers • Retinex filter for reducing shadows and increasing local contrast • Deconvolution for out-of-focus and motion blur compensation (see below) • Easy red-eye removal • User specified filters in spatial and frequency domain • Resize, rotate, crop and warping of images • Pixel art scaling operation for icons and other graphic (xBR/HQx/Waifu2x) • Scanner, camera and printer support • File format support: • Read/write BMP, ICO, CUR, WMF, EMF, PNG, MNG, GIF, PCX, JPEG, JPEG 2000 and JPEG XL images • Read CR2, RAS, PNM, PGM, PPM, HIPS and Matlab files • Morphological operations • Color model conversion: RGB, CMY, HSI, Lab, YCbCr, YIQ and PCA • Distance, Fourier and discrete cosine transformation • Math expression module for creating and transforming images and advanced "pocket" calculator with equation solver • Plugin system for adding more specialized features. See below for available plugins Supported operating systems Windows 98/ME/2000/XP/Vista/7/8/10/11 Changes Improved Color tone adjustment with Hue uniformity Improved DNG support Updated to .net 8 for faster processing in some operations This download is for all Windows versions. All other download ... |
|
6,267 | Mar 28, 2024 Michael Vinther <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/Image AnalyzerScreen1_th.png"border="0"> |
|
ImageCacheViewer v1.27 ImageCacheViewer v1.27 A simple tool that scans the cache of your Web browser (Internet Explorer, Firefox, or Chrome), and lists the images displayed in the Web sites that you recently visited. System Requirements And Limitations This utility works in any version of Windows, starting from Windows XP and up to Windows 10. Both 32-bit and 64-bit systems are supported. The following Web browsers are supported: Internet Explorer, Mozilla Firefox, SeaMonkey, and Google Chrome. ImageCacheViewer won't work if you configure your Web browser to clear the cache after closing it. It's recommended to close all windows of your Web browser before using ImageCacheViewer, to ensure that all cache files are saved to the disk. Start Using ImageCacheViewer ImageCacheViewer doesn't require any installation process or additional DLL files. In order to start using it, simply run the executable file - ImageCacheViewer.exe After running ImageCacheViewer, it begins to scan the cache of your Web browser, and displays all cached images from Web sites you visited in the last day. If you want to get images from other days, you can remove or change the last 1-day filter from the 'Advanced Options' window (F9). After the scanning process is finished, you can also watch the image in the lower pane of ImageCacheViewer, by selecting the desired item in the upper pane. If from some reason ImageCacheViewer fails to detect the cache of your Web browser properly, you can go to 'Advanced Options' window (F9), and choose the desired cache folders to scan for each Web browser. Command-Line Options /stext <Filename> Save the cached images list into a simple text file. /stab <Filename> Save the cached images list into a tab-delimited text file. /scomma <Filename> Save the cached images list into a comma-delimited text file (csv). /stabular <Filename> Save the cached ... |
|
4,480 | Jan 18, 2022 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/imagecacheviewer1_th.png"border="0"> |
|
ImageFinder v1.005 ImageFinder v1.005 Free program for finding and removing identical and similar images from your computer. Quick search for similar images ImageFinder can operate in two modes - find absolutely identical pictures and find similar images. In the first case, the duplicate picture remover searches for completely identical images. In the second case, the application similar image finder searches for images which are different, but are basically the same images. For example, it may be two images from the same image but of different size or dimensions or different shades of color, and so on. Preview of duplicate images All duplicate images can be previewed as thumbnails and can be sorted by Size, Name, creation Date, Modification date or Dimensions. Find Similar & Identical Images with ease Choose if you want to search for similar or identical Images, select the folders you want to search and set the customization level for similar images and then launch your scan. Scan files in different formats With ImageFinder can even find similar images that have been saved in different formats such as BMP, GIF, PNG, TIFF, JPEG, and many others. System Requirements Windows 11, 10, 8.1, 8, 7. Including both 32-bit and 64-bit versions. Available languages: German, English, Polish, France, Hungary, Chinese simplified, Chinese traditional, Korean, Slovak, Indonesian, Czech, Greek, Romanian, Hindi, Italian, Netherlands, Portuguese , Spanish , Turkish, Japan, Arabic and Russian. Changes v1.005 (04 Oct 2023) - Small Bugfixes - 100% Spyware FREE - No adware, spyware, malware, backdoors, browser toolbars, "value-added software" or Viruses. This download is for the 64bit version. If you need the 32bit version, download here. Click here to visit the author's website. |
|
4,379 | Nov 08, 2023 Kurt Zimmermann <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/ImageFinder1_th.png"border="0"> |
|
ImageGlass v8.3.11.21 ImageGlass v8.3.11.21 A lightweight software application whose purpose is to help you view images in a clean and intuitive working environment. It gives you the possibility to view over 70+ common image formats, including .gif, .svg, .png, .heic, ... and many more advanced features which help normal users or designers to speed up their work. Features A simple-to-use program that comes packed with basic functions and a nice minimal modern user interface. 70+ formats supported- ImageGlass works great with GIF, SVG, HEIC and RAW formats, among others Lightweight & Versatile- Fast switch between images Personalization- Easy installation of new language packs & themes Changes: ImageGlass Kobe 8.3.11.21 New: Updated UI for Windows 11 (#1099, #1147) Added "Custom zoom..." feature Z Added Ascending and descending loading options in the main menu / context menu (#1101) Added support for multipage printing for .FAX format (#1091) Added options in Settings > Image > Full screen to hide the toolbar and thumbnail bar in Full screen mode (#551, #621, #936, #1035) 🔮 Improvements: Updated Magick.NET to 8.4.0 Changed keyboard shortcut of main menu from ` to Alt+F (#1159) Set keyboard shortcut for "Keep window always on top" to ` (#970, #1161) Set keyboard shortcut for Copy image path to Ctrl+L (#608) Improved multipage formats auto-detection (#1113) Improved color management for multipage formats (#906) Supported accent color in theme pack for toolbar and thumbnail bar (#218, #1121) Added an icon for .HEIC extension (#1076) Added an option "Use embedded thumbnail for RAW formats" in Settings > Image > Image loading (#682, #495) 🐛 Bugfixes: Fixed an issue that the image opened from clipboard ... |
|
2,970 | Dec 15, 2021 Dương Diệu Pháp <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/ImageGlass2_th.png"border="0"> |
|
ImDisk Toolkit v20220301 ImDisk Toolkit v20220301 This tool will let you mount image files of hard drive, cd-rom or floppy, and create one or several ramdisks with various parameters. This all-in-one package includes the ImDisk Virtual Disk Driver (2.1.1), the DiscUtils library that extends the number of supported image file formats, and adds several GUIs and features. Features Ramdisk with optional dynamic memory management Image file mounting, many formats supported Requirements: Windows XP, Vista, 7, 8, 8.1 or 10 (32 or 64-bit). Some image file formats also require .NET Framework 4 (included in Windows 8 and later) to be mounted with the DiscUtils library. Changes: Version 20220301 - updated to driver 2.1.1 (2.0.9 kept on x64 systems without SHA256 signature support) - installer: removed the option to disable automatic loading of ImDskSvc - installer: startup type of ImDskSvc, DevIoDrv and AWEAlloc is now set to manual This download is for the 64bit version. If you need the 32bit version, download here. Click here to visit the author's website. |
|
4,294 | Mar 02, 2022 ImDisk Toolkit <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/imdisk1_th.png"border="0"> |
|
ImHex v1.29.0 ImHex v1.29.0 A modern hex editor and reverse engineering tool written in pure C++20 using GLFW and Dear ImGui. Features Featureful hex view Byte patching Patch management Copy bytes as feature Bytes Hex string C, C++, C#, Rust, Python, Java & JavaScript array ASCII-Art hex view HTML self-contained div String and hex search Colorful highlighting Goto from start, end and current cursor position Custom C++-like pattern language for parsing highlighting a file's content Automatic loading based on MIME type arrays, pointers, structs, unions, enums, bitfields, namespaces, little and big endian support, conditionals and much more! Useful error messages, syntax highlighting and error marking Doesn't burn out your retinas when used in late-night sessions Dark mode by default, but a light mode is available as well Data importing Base64 files IPS and IPS32 patches Data exporting IPS and IPS32 patches ... |
|
1,611 | May 24, 2023 WerWolv <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/ImHex1_th.png"border="0"> |
|
Indicium v2.0 Indicium v2.0 Portable, advanced system information utility. It's also capable of recovering Windows product key. Features: Operating system details Windows product key CPUs RAM modules Virtual memory Motherboards Graphics cards Storage (disks, volumes, opticals, removables) Network Adapters (physicals, virtuals) Audio devices Peripherals (keyboards, pointing devices) BIOS information Capture screenshots Save information in JSON Compatibility: .NET Framework 4.5.2 Compatible with Windows 7, 8, 8.1, 10 Does not work with Windows XP or Vista Changes: [2.0] - 2018-09-21 Added: Check for newer version Fix: Windows product key bugs Click here to visit the author's website. |
|
3,508 | Nov 18, 2019 hellzerg <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/Indicium1_th.png"border="0"> |
|
INetGet for Windows v1.02 INetGet for Windows v1.02 Simple command-line tool for downloading files via HTTP(S) or FTP, based on the WinINet API. This program provides a similar functionality as the well-known WGet and cURL tools. However, in contrast to those, INetGet is based directly on the "native" Windows Internet programming interface (WinINet). This comes at the advantage that INetGet is very small and lightweight, as it uses the HTTP(S) and FTP services provided by the operating system, instead of having to implement these protocols on its own. There are no external dependencies (e.g. OpenSSL or GnuTLS), except for standard system libraries that are present on every Windows system anyway. Still, advanced features, such as HTTPS and IPv6, are supported. Furthermore, since INetGet is based on the Windows crypto libraries, it uses the Windows certificate store. This means that, in contrast the aforementioned tools, you do not need to provide and maintain your own certificate bundle for HTTPS. Certificate updates as well as security fixes for the underlying cryptographic routines are automatically provided, via Windows Update. On the downside, you will have to trust Microsoft's protocol implementations. And the availability of some features depends on the Windows version. System Requirements INetGet works on Windows Vista or any later Windows version. Windows XP should work too, but is not recommended these days! The 32-Bit version of INetGet runs on all 32-Bit and 64-Bit Windows versions, while the 64-Bit version of INetGet requires a 64-Bit Windows version. IPv6 support requires Internet Explorer 7 or later. Note that all supported Windows versions (Vista or later) already meet this requirement. Windows XP requires manual update to IE7 in order to enable IPv6 support. As far as HTTPS support is concerned, all relevant Windows versions (XP or later) support TLS 1.0 as well as the deprecated SSL 2.0 and SSL 3.0 protocols. Support for ... |
|
4,946 | Dec 01, 2019 LoRd_MuldeR <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/INetGet for Windows1_th.png"border="0"> |
|
Input Director v2.1.4 Input Director v2.1.4 Enables the control of multiple Windows systems using the keyboard/mouse attached to one computer. Switch control between systems either by hotkey or by moving the cursor to the screen edge on one computer for it to appear on the next one Input Director supports a shared clipboard - copy on one computer, switch control, and paste . Input Director is compatible with: Windows 11, Windows 10, Windows 8/8.1 and Windows 7. The systems must be networked. Features Easy to Use Easy to follow installation and usage guides - setup only takes a few minutes Input Director's flexible monitor layout system makes it easy to accurately reflect a monitor's physical location and size: Multi-monitor support Shared Clipboard - copy and paste between computers (including files!) Compatible with Windows 11, Windows 10, Windows 8/8.1 and Windows 7 Only Input Director ensures the cursor remains visible and correct if the mouse is disconnected on a Windows 10 or Window 11 system Transitioning control to another computer is as simple as moving your cursor off the screen on one computer for it to jump to the other Able to control a computer without needing to login to it first Supports Windows fast user switching Compatible with Windows User Account Control pop-ups Manage all your computers at once Simultaneously lock all computers Import/Export Input Director configuration and apply configuration updates from the command line Synchronise screensavers across your computers Synchronise shutdown of your system (or individually configure whether a computer goes to standby, hibernate or shuts down) Wake systems over the network Security Encrypt network data between Input Director controlled computers Lock down the Input Director configuration so that only System Administrators may make changes Systems can limit which systems can control them by host name, ip address or network subnet Transition Features Ripples surround the cursor for a few seconds after transitioning to help the eye follow the cursor from one computer to another: Transitioning using the mouse can be ... |
|
3,534 | Oct 20, 2023 Shane Richards <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/Input Director1_th.png"border="0"> |
|
InsideClipboard v1.25 InsideClipboard v1.25 A free utility that displays the binary content of all formats that are currently stored in the Clipboard. Each time that you copy something into the clipboard for pasting it into another application, the copied data is saved into multiple formats. The main clipboard application of Windows only display the basic clipboard formats, like text and bitmaps, but doesn't display the list of all formats that are stored in the clipboard. InsideClipboard is a small utility that displays the binary content of all formats that are currently stored in the clipboard, and allow you to save the content of specific format into a binary file. System Requirements This utility works on any version of Windows, from Windows XP to Windows 11. Changes v1.25: Added 'Put Icon On Tray' option. Added 'No Refresh For Excel' option. When this option is turned on, InsideClipboard doesn't refresh when you copy data in Excel (Some copy actions cause an error in Excel if InsideClipboard tries to extract the data from clipboard). Using InsideClipboard InsideClipboard doesn't require any installation process or additional dll files. In order to start using it, simply run the executable file (InsideClipboard.exe) The main window of InsideClipboard has 2 panes. The top pane display the list of all formats that are currently stored in the clipboard. When selecting a single item in the top pane, the bottom pane displays the content of the selected clipboard format. You can view the content as Ascii (for text-based formats, like RTF or HTML) or as hex dump. Command-Line Options /stext <Filename> Save the clipboard items list into a regular text file. /stab <Filename> Save the clipboard items list into a tab-delimited text file. /stabular <Filename> Save the clipboard items list into a tabular text file. /shtml <Filename> Save the clipboard items list ... |
|
8,820 | Apr 01, 2024 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/insideclipboard_th.png"border="0"> |
|
Instagiffer 1.75 for Mac Instagiffer 1.75 for Mac So your love of GIFs has brought you here, and you want to take things to the next level. Whether you pronounce it GIF, or GIF (see what we did there?), Instagiffer is the perfect tool for creating the best reaction moments to any situation. Sometimes, only a GIF will do in a conversation, and can say so much by saying so little. If you find yourself struggling to always find the perfect GIF, look no more! Meaning, just make your own. It’s easy. Promise. Instagiffer allows you to capture the best GIF-worthy moments instantly from your screen. Whether you’re watching a YouTube Video, Netflix, or your favorite Vine star, you can grab the perfect moment, throw a little magic into it, and release your newborn GIF into the world. You’ll become an instant professional GIF editor, with the ability to add text, filters, loops, and more. Plus, it’s totally free of charge, and free from annoying ads and spyware - because let’s face it, that **** sucks. Alright, ready to become the GIF Master, and have the perfect GIF for every occasion? Go ahead and get started, and… you’re welcome for your new-found Internet fame :). Check out our resident sensei’s video tutorials over at her YouTube dōjō, read the FAQ and start giffing! Features Generate GIFs from anything! GIF YouTube. and hundreds of other supported video sites Tweak the exact region you want to GIF with the cropping tool Create optimized, quality GIFs under 1MB in size, or large HD GIFs if you prefer Open and edit existing GIF files Add highly customizable text and custom logos Make awesome cinemagraphs and subtle movement GIFs in seconds ... |
|
5,429 | Feb 13, 2017 Instagiffer <img src="http://www.oldergeeks.com/downloads/gallery/thumbs/Instagiffer_th.png"border="0"> |
|
Instagiffer 1.75 for Windows Instagiffer 1.75 for Windows So your love of GIFs has brought you here, and you want to take things to the next level. Whether you pronounce it GIF, or GIF (see what we did there?), Instagiffer is the perfect tool for creating the best reaction moments to any situation. Sometimes, only a GIF will do in a conversation, and can say so much by saying so little. If you find yourself struggling to always find the perfect GIF, look no more! Meaning, just make your own. It’s easy. Promise. Instagiffer allows you to capture the best GIF-worthy moments instantly from your screen. Whether you’re watching a YouTube Video, Netflix, or your favorite Vine star, you can grab the perfect moment, throw a little magic into it, and release your newborn GIF into the world. You’ll become an instant professional GIF editor, with the ability to add text, filters, loops, and more. Plus, it’s totally free of charge, and free from annoying ads and spyware - because let’s face it, that **** sucks. Alright, ready to become the GIF Master, and have the perfect GIF for every occasion? Go ahead and get started, and… you’re welcome for your new-found Internet fame :). Check out our resident sensei’s video tutorials over at her YouTube dōjō, read the FAQ and start giffing! Features Generate GIFs from anything! GIF YouTube. and hundreds of other supported video sites Tweak the exact region you want to GIF with the cropping tool Create optimized, quality GIFs under 1MB in size, or large HD GIFs if you prefer Open and edit existing GIF files Add highly customizable text and custom logos Make awesome cinemagraphs and subtle movement GIFs in seconds ... |
|
5,465 | Feb 13, 2017 Instagiffer <img src="http://www.oldergeeks.com/downloads/gallery/thumbs/Instagiffer_th.png"border="0"> |
 |
Install Printers and Copiers v1.0 Install Printers and Copiers v1.0 This script installs printers and copiers entirely through Powershell. If deployed remotely, it is entirely silent. I use it with PDQ Deploy. It sorta sometimes works with Windows 7 (it doesn't have great PS support for printers, so you have to use more difficult methods that easily cause problems), but you shouldn't be using Windows 7 on a network anymore anyway, so YMMV. Change the default $Repository path to match your environment. Call the script like this to install a Canon copier, for example: C:\path\to\InstallPC.ps1 -PrinterName "Accounting Copier" -PrinterAddress "192.168.1.10" -Folder "Canon Copiers" -DriverName "Canon Generic Plus UFR II" -InfFile "Driver\CNLB0MA64.inf" Or like this to uninstall it: C:\path\to\InstallPC.ps1 -PrinterName "Accounting Copier" -Uninstall To download this script instead of opening it, right click the download link at the bottom of the page and choose to save the link. Click here to visit the author's website. |
|
2,173 | Jul 22, 2021 Curtis Prevo <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/InstallPriCop1_th.png"border="0"> |
|
InstalledAppView v1.07 InstalledAppView v1.07 A free tool for Windows 10/11 that displays the details of Windows apps installed on your system. For every Windows app, the following information is displayed: App Name, App Version, Registry Name, Registry Modified Time, Install Folder, Install Folder Owner, Uninstall Command, and more... InstalledAppView allows you to load the Windows 10 apps list from your local system, remote computer on your network, and from external disk plugged to your computer. InstalledAppView also allows you to view the XML files of the Windows app (AppxManifest.xml and AppxBlockMap.xml), uninstall apps, quietly uninstall apps, open the install folder of the app, and more... System Requirements This tool works on Windows 11, Windows 10, and Windows 8. Both 32-bit and 64-bit systems are supported. Changes: Version 1.07 Fixed a few high DPI mode issues. Added 'Sort By' toolbar button Start Using InstalledAppView InstalledAppView doesn't require any installation process or additional DLL files. In order to start using it, simply run the executable file - InstalledAppView.exe After you run InstalledAppView, the upper pane of the main window displays the list of installed Windows Apps on your system. When selecting a single Windows app on the upper pane, the lower pane displays the XML of the app (AppxManifest.xml or AppxBlockMap.xml). You can also select one or more apps in the upper pane and then use the 'Save Selected Items' option (CTRL+S) to export the apps list to csv/tab-delimited/xml/html/JSON file. You can also copy the selected items to the clipboard and them paste them into Excel or other spreadsheet application. View Windows 10 Apps on remote computer In order to load the installed Windows 10 Apps from a remote computer on your network, simply press F9 ('Advanced Options' window), choose the 'Remote computer' or 'Remote computer - all users' option from the 'Load From' combo-box, ... |
|
2,039 | Apr 24, 2023 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/installedappview1_th.png"border="0"> |
|
InstalledPackagesView v1.05 32bit InstalledPackagesView v1.05 32bit InstalledPackagesView is a tool for Windows that displays the list of all software packages installed on your system with Windows Installer, and lists the files, Registry keys, and .NET Assemblies associated with them. For every installed software, the following information is displayed: Display Name, Display Version, Install Date, Registry Time, Estimated Size, Install Location, Install Source, MSI Filename (In C:\Windows\Installer), and more... You can watch the installed software packages information from your local system or from another system on external hard-drive. The installed software information is loaded from the following Registry keys: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\UserData\Products HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\UserData\Components Be aware that this tool lists only software installed by Windows Installer (MSI), it doesn't list any software installed by other installers. System Requirements This utility works on any version of Windows, starting from Windows XP and up to Windows 10. Both 32-bit and 64-bit systems are supported. Versions History Version 1.05: Added /cfg command-line option to start InstalledPackagesView with the specified config file. Added 'Save File Encoding' option. Start Using InstalledPackagesView InstalledPackagesView doesn't require any installation process or additional DLL files. In order to start using it, simply run the executable file - InstalledPackagesView.exe After running InstalledPackagesView, the upper pane of the main window displays the list of all MSI packages installed on your system. When selecting an item in the upper pane, the lower pane displays the list of files, Registry keys, and NET Assemblies associated with the selected software package. If you want to view the information of external drive, go to the 'Advanced Options' window (F9), choose to load from external drive and then type the config folder (For example: F:\windows\system32\config) on the external drive. Command-Line Options /stext <Filename> Save the installed Windows Installer packages into a simple text file. /stab <Filename> Save the installed Windows Installer packages into a tab-delimited text file. /scomma <Filename> Save the installed ... |
|
4,937 | Jan 31, 2019 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/installedpackagesview1_th.png"border="0"> |
|
InstalledPackagesView v1.05 64bit InstalledPackagesView v1.05 64bit InstalledPackagesView is a tool for Windows that displays the list of all software packages installed on your system with Windows Installer, and lists the files, Registry keys, and .NET Assemblies associated with them. For every installed software, the following information is displayed: Display Name, Display Version, Install Date, Registry Time, Estimated Size, Install Location, Install Source, MSI Filename (In C:\Windows\Installer), and more... You can watch the installed software packages information from your local system or from another system on external hard-drive. The installed software information is loaded from the following Registry keys: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\UserData\Products HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\UserData\Components Be aware that this tool lists only software installed by Windows Installer (MSI), it doesn't list any software installed by other installers. System Requirements This utility works on any version of Windows, starting from Windows XP and up to Windows 10. Both 32-bit and 64-bit systems are supported. Versions History Version 1.05: Added /cfg command-line option to start InstalledPackagesView with the specified config file. Added 'Save File Encoding' option. Start Using InstalledPackagesView InstalledPackagesView doesn't require any installation process or additional DLL files. In order to start using it, simply run the executable file - InstalledPackagesView.exe After running InstalledPackagesView, the upper pane of the main window displays the list of all MSI packages installed on your system. When selecting an item in the upper pane, the lower pane displays the list of files, Registry keys, and NET Assemblies associated with the selected software package. If you want to view the information of external drive, go to the 'Advanced Options' window (F9), choose to load from external drive and then type the config folder (For example: F:\windows\system32\config) on the external drive. Command-Line Options /stext <Filename> Save the installed Windows Installer packages into a simple text file. /stab <Filename> Save the installed Windows Installer packages into a tab-delimited text file. /scomma <Filename> Save the installed ... |
|
4,923 | Jan 31, 2019 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/installedpackagesview1_th.png"border="0"> |
|
Internet Processes Viewer v3.8.5.0 Internet Processes Viewer v3.8.5.0 Retrieves detailed snapshots of your computer’s active TCP and UDP network connections along with the owning processes and users each time you run it. It gives quick results with a level of detail helpful when analyzing Cybersecurity incidents and troubleshooting network applications. SHA-256: 814fa4d55277e46a81ca07c110977191f521499989acbee2bff7e41d0b2d1c28 This application may be used at no cost after reading and accepting the built-in EULA. Typical write access to your interactive user's HKCU Software registry is required for the product license acceptance. Uniquely identify executable modules used in creating and maintaining suspicious network connections. Provide .csv reports from the application running on an endpoint of interest to your Cybersecurity support team. Intended target audience: Cybersecurity, Network, Systems Analysts, and similar technical users. Click the question mark in the upper right hand corner of the program for full instructions on it's use. Minimum system requirements Microsoft Windows 10 or 11 and .NET 6 Click here to visit the author's website. |
|
2,923 | Jun 13, 2022 Steve Chaison Software <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/InternetProcessesTracker_th.png"border="0"> |
|
Investor`s Clock v1.09 Investor`s Clock v1.09 Shows the time in different time zones on the Windows Desktop. This program was designed for Wall Street traders and investors but can be useful for anyone. Supported operating systems: Windows 64bit 7, 8.1, 10, 11 Click here to visit the author's website. |
|
47 | Apr 23, 2024 Sergejs Bure <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/InvClock1_th.png"border="0"> |
|
Invoke-PingSweep v1.0 Invoke-PingSweep v1.0 This cmdlet is meant to perform a ping sweep of a defined subnet. This will enumerate any hosts on a network that respond to pings. If IP source routing is enabled this function will allow you to define one single source address or use a random source address for every ping to each device. This cmdlet is used to perform a ping sweep of a defined subnet. Executioner is able to define the start and end IP range to use Executioner is also able to define a source to mask where the ping sweep is coming from. Click here to visit the author's website. |
|
2,215 | Jun 15, 2021 Robert H. Osborne <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/InvokePingSweep1_th.png"border="0"> |
|
IP Changer (IPC) v1.3.4.0 IP Changer (IPC) v1.3.4.0 Provides a simple way to change your IP address for all your available network adapters. IP Changer (IPC) will detect all Network Adapters enabled on Startup; from there, you can select the Adapters you wish to configure and change between them to manage all your Network Interfaces as you see fit. It additionally includes access to Enable/Release/Renew DHCP, Enable/Disable Network Adapter, and Enter IP Manually. And you can also make Custom Settings that can be saved, making them readily available the next time you open the tool. Requirement: -Windows 7* SP1+ * Windows 7 SP1 is supported with Extended Security Updates installed. Changelog: - Self-contained EXE .Net 7 - can modify a custom ip (right-click /modify) - misc stuff / optimisation Click here to visit the author's website. |
|
3,076 | Apr 27, 2023 Wagnardsoft <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/IPC1_th.png"border="0"> |
|
IP Finder v1.4.0.2 IP Finder v1.4.0.2 IP Finder is a software that lets you check your internal and external IPs and MAC Address (Physical Address). How to use: Just open IP Finder and info will appear Change Log: Version 1.4.0.2 [25/12/2018] IP Finder 1.4 uses .NET 4.6 Software icon changed Added: External IP address Added: Mac address (physical address) Added: Save information as text file Added: Save as text file to File info Added: Copy information to clipboard Added: Ability to copy any info to clipboard Added: Open IP Finder homepage from Help menu Added: “Check for updates” in Help menu and in about page. In addition, it will check for updates on startup. If there is a new update, IP Finder will inform the user. Change log now retrieved form my site. If IP Finder failed to get it, IP Finder will show the local change log. Copy won’t show a dialog to inform you that the text got copied, a light green background will appear Refresh icon changed New About window CRC32: 79D8CC15 MD5: 285079667F3A13ACC2980357E3EDE1E8 SHA-1: 7591F66EA0B511508E6235AF9590B65FE5E2A542 SHA-256: 8A17EB4EBC601E1FB79CE2ED775CD88D912F16B37AD7A63D2EAA3E858C429C76 Requirements: .NET 4.6 minimum Click here to visit the author's website. |
|
3,746 | Jul 15, 2019 Sami Jildeh <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/IP Finder1_th.png"border="0"> |
|
IP-Info v1.4 IP-Info v1.4 A small tool that retrieves your public IP (v4 and v6), local IP and additional information from the IP-Config. Public IPv4 (Internet Protocol Version 4) is the most widely deployed protocol used to connect devices to the Internet. IPv4 uses a 32-bit address scheme allowing a total of 2^32 addresses. Public IPv6 (Internet Protocol Version 6) is the newest version of the protocol that uses a 128-bit address scheme allowing a total of 2^128 addresses. Local IPv4 address is a network device's IPv4 address intended to be used by other devices on a LAN to identify it. he IP-Config diplays your detailed network configuration information. Hotkeys Enter / Ctrl + C (in main window) - Copy respective value to clipboard Escape (in main window) - Quit application Version 1.4 Redesigned GUI Added new hotkeys Added multiple new exceptions Increased timeouts up to 30 seconds Now, the last opened tab will be automatically reselected on startup Click here to visit the author's website. |
|
5,593 | May 05, 2019 2xDSoft <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/ipinfo1_th.png"border="0"> |
|
IP-Tools v5.6.6 IP-Tools v5.6.6 A free set of network tools. The set includes: • IP-Client • IP-Msg Library • Ip-Proxy Setup • IP-Proxy • IP-Rack • IP-Server • IP-Sniffer • IP-Sniffer Setup • IP-Toolbox Note: This file has one hit on VirusTotal. This is a false positive. We have confirmed the file to be safe. This download is for the Windows version. If you need the Linux Debian version, download here. If you need the Linux Debian ARM version, download here. Click here to visit the author's website. |
|
1,287 | Nov 15, 2023 decontev <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/IP-Tools1_th.png"border="0"> |
|
IPerf2 v2.1.9 IPerf2 v2.1.9 A tool that measures network performance of TCP/UDP including latency A network traffic tool for measuring TCP and UDP performance with metrics around both throughput and latency. The goals include maintaining an active iperf code base across a broad set of platforms and operating systems. This is a multi-threaded design which scales with the number of CPUs or cores within a system. Features See the manual page for more features and usage. Fix portability, compile and tested with Linux, Win10, Win7, WinXP, MacOS, Android and some set-top box OSs. Require -u for UDP (-b no longer defaults to UDP) Improved performance Enhanced reporting with -e Support smaller report intervals (100 us or greater, configure --enable-fastsampling for high precision interval time output) Support SO_RCVTIMEOUT for server reports regardless of no packets Support SO_SNDTIMEO on send so socket write won't block beyond -t or -i Support SO_TIMESTAMP for kernel level packet timestamping Support end/end latency in mean/min/max/stdev format (UDP) (-e required) (assumes client and server clocks synched, e.g by Precision Time Protocol to an OCXO oscillator per Spectracom) Fixes to bind so OS can auto assign source port Add local port to bind support (-B option) using colon as separator (v4) or brackets (v6) e.g. iperf -c 192.168.100.100 -B 192.168.100.10:6001 (v4) or for v6, iperf -V -c 2001:e30:1401:2:d46e:b891:3082:b939 -B [2001:e30:1401:2:d46e:b891:3082:b940]:6001 Support TCP rate limited streams (via the -b) using simplified token bucket Support packets per second (UDP) via pps as units, (e.g. -b 1000pps) Display PPS in both client and server reports (UDP) (-e required) ... |
|
1,636 | Jan 24, 2024 Robert McMahon <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/IPerf21_th.png"border="0"> |
 |
IPFire v2.27 core172 IPFire v2.27 core172 The Open Source Firewall Secure your network with IPFire IPFire is a hardened, versatile, state-of-the-art Open Source firewall based on Linux. Its ease of use, high performance in any scenario and extensibility make it usable for everyone. Security Security is the highest priority in IPFire. It is hardened to protect itself from attacks from the Internet and prevents attacks on your network. Firewall Its powerful firewall engine and Intrusion Prevention System protects your network against attacks from the Internet and Denial-of-Service attacks. Open Source IPFire is free software and developed by an open community and trusted by hundreds of thousands of users from all around the world. Features Security The primary objective of IPFire is security. Its easy to configure firewall engine and Intrusion Prevention System stops any attackers from breaking into your network. In the default configuration, the network is split into various zones with different security policies such as a LAN and DMZ to manage risks inside the network and have custom configuration for the specific needs of each segment of the network. But even the firewall needs to protect itself. IPFire is built from scratch and not based on any other distribution. This allows the developers to harden IPFire better than any other server operating system and build all components specifically for use as a firewall. Frequent updates keep IPFire strong against security vulnerabilities and new attack vectors. Firewall IPFire employs a Stateful Packet Inspection (SPI) firewall, which is built on top of Netfilter, the Linux packet filtering framework. It filters packets fast and achieves throughputs of up to multiple tens of Gigabit per second. Its intuitive web user interface allows to create groups of hosts and networks which can be used to keep large set of rules short and tidy - something very important in complex environments with strict access control. Logging and graphical reports give great insight. Various ... |
|
1,499 | Feb 10, 2023 Lightning Wire Labs GmbH <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/IPFire1_th.png"border="0"> |
|
IPInfoOffline v1.60 IPInfoOffline v1.60 IPInfoOffline Allows you to view information about IP addresses, without connecting any external server. It uses a compressed IP addresses database that is stored inside the exe file. For each IP address, the following information is displayed: IP block range, Organization (RIPE, ARIN, APNIC, LACNIC or AFRINIC), Assigned Date, Country Name, and Country Code. After retrieving the information about the desired IP addresses, You can copy the information to the clipboard, or save it into text/html/xml/csv file. System Requirements This utility works with any version of Windows from Windows 98 to Windows 10. Versions History Version 1.60: Added 'CIDR' column. Added 'Duplicate Count' column, which displays the number of duplicate IP addresses when the "Don't add duplicate IP addresses" or "Don't add duplicate IP blocks" options are turned on. Updated the internal IP to country database. Using IPInfoOffline IPInfoOffline doesn't require any installation process or additional DLL files. In order to start using it, simply run the executable file - IPInfoOffline.exe After running IPInfoOffline, you can type the IP addresses that you want to inspect, and then click 'Ok'. Using External IP To Country File although the exe of IPInfoOffline already contains the IP addresses database, you can still use an external IP To Country file from the following link: https://software77.net/geo-ip/ If you put the IpToCountry.csv file downloaded from this Web site in the same folder of IPInfoOffline, it will automatically be loaded by IPInfoOffline and will be used instead of the internal IP database. Starting from version 1.40, you can also use the GeoLite City database. You should download the GeoLite City database (https://dev.maxmind.com/geoip/geoip2/geolite2/), put it in the same folder of IPInfoOffline.exe, and IPInfoOffline will automatically use it to get the country/city information for every IP address. (This database format was removed from GeoLite Web site) Starting from version ... |
|
8,652 | Apr 04, 2021 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/ipinfooffline_th.png"border="0"> |
|
IPNeighborsView v1.01 IPNeighborsView v1.01 A tool for Windows 10/8/7/Vista that displays the IP neighbor table of your local computer. For every IP neighbor entry, the following information is displayed: IP Address, MAC Address, MAC Address Company, State, State Time, Local Adapter Name, Local Connection Name. In the IP neighbor table, you can find the details of computers and devices recently connected to your network. computers and devices are listed only if Windows operating system detected them. System Requirements This tool works on any version of Windows, starting from Windows Vista and up to Windows 10. Both 32-bit and 64-bit systems are supported. Changes v1.01 Fixed to sort properly the IP Address column. Start Using IPNeighborsView IPNeighborsView doesn't require any installation process or additional DLL files. In order to start using it, simply run the executable file - IPNeighborsView.exe Afer running IPNeighborsView, the main window displays the current IP neighbor table of your system. By default, IPNeighborsView hides the permanent items in the IP neighbor table, but you can view these items by unchecking the 'Hide Permanent Items' options (Under the Options menu). You can select one or more items (or press Ctrl+A to select all of them) and then use the 'Save Selected Items' option (Ctrl+S) to export the table to comma-delimited/tab-delimited/HTML/XML/JSON file. Command-Line Options /stext <Filename> Save the IP Neighbors items to a simple text file. /stab <Filename> Save the IP Neighbors items to a tab-delimited text file. /scomma <Filename> Save the IP Neighbors items to a comma-delimited text file (csv). /shtml <Filename> Save the IP Neighbors items to HTML5 file (Horizontal). /sverhtml <Filename> Save the IP Neighbors items to HTML5 file (Vertical). /sxml <Filename> Save the IP Neighbors items to XML file. /sjson <Filename> Save the IP Neighbors items to JSON file. Translating IPNeighborsView to other languages In order to translate IPNeighborsView to other language, follow the instructions below: Run ... |
|
2,100 | Mar 18, 2022 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/ipneighborsview1_th.png"border="0"> |
|
IPNetInfo v1.95 IPNetInfo v1.95 IPNetInfo is a small utility that allows you to easily find all available information about an IP address: The owner of the IP address, the country/state name, IP addresses range, contact information (address, phone, fax, and email), and more. This utility can be very useful for finding the origin of unsolicited mail. You can simply copy the message headers from your email software and paste them into IPNetInfo utility. IPNetInfo automatically extracts all IP addresses from the message headers, and displays the information about these IP addresses. How does it work ? The IP address information is retrieved by sending a request to the whois server of ARIN. If ARIN doesn't maintain the information about the requested IP address, a second request is sent to the whois server of RIPE, APNIC, LACNIC or AfriNIC. After the IP address information is retrieved, IPNetInfo analyzes the Whois record and displays it in a table. Notice: From time to time, the WHOIS server of ARIN is down and doesn't respond to WHOIS requests from IPNetInfo, and thus IPNetinfo fails to retrieve the IP address. When such a thing occurs, simply try again later. Retrieving the message headers from your email client If you don't know how to get the message headers from your email client, this web site can help you - it provides detailed explanation about how to get the message headers in each email client. Versions History Version 1.95: You can now change all settings from command-line, by using the same variable like in the .cfg file, for example: IPNetInfo.exe /AutoFailedRetry 1 /AllowIPv6 0 System Requirements Windows operating system: Any version of Windows, starting from Windows 98 and up to Windows 10 Internet connection. On a firewall, you should allow ... |
|
8,743 | Feb 17, 2020 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/ipnetinfo_th.png"border="0"> |
|
IPPathTableView v1.00 IPPathTableView v1.00 A tool for Windows 11/10/8/7/Vista that displays the IP path table of your local computer. For every IP path entry, the following information is displayed: Source, Destination, Next Hop, MTU, Reachaable (Yes/No), Adapter Name, Connection Name, Link Transmit Speed, Link Receive Speed. The IP path table contains the list of all IP Addresses that your computer connected recently System Requirements This tool works on any version of Windows, starting from Windows Vista and up to Windows 11. Both 32-bit and 64-bit systems are supported. Start Using IPPathTableView IPPathTableView doesn't require any installation process or additional DLL files. In order to start using it, simply run the executable file - IPPathTableView.exe Afer running IPPathTableView, the main window displays the current IP path table of your system. You can press F5 to refresh the display of IP path table, or you can automatically refresh the display every 1 - 10 seconds by using the Auto Refresh option (Under the Options menu). You can select one or more items (or press Ctrl+A to select all of them) and then use the 'Save Selected Items' option (Ctrl+S) to export the table to comma-delimited/tab-delimited/HTML/XML/JSON file. Command-Line Options /stext <Filename> Save the IP path table to a simple text file. /stab <Filename> Save the IP path table to a tab-delimited text file. /scomma <Filename> Save the IP path table to a comma-delimited text file (csv). /shtml <Filename> Save the IP path table to HTML5 file (Horizontal). /sverhtml <Filename> Save the IP path table to HTML5 file (Vertical). /sxml <Filename> Save the IP path table to XML file. /sjson <Filename> Save the IP path table to JSON file. Translating IPPathTableView to other languages In order to translate IPPathTableView to other language, follow the instructions below: 1) Run IPPathTableView with /savelangfile parameter: IPPathTableView.exe /savelangfile A file named IPPathTableView_lng.ini will be created ... |
|
1,509 | Feb 06, 2024 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/ippathtableview_th.png"border="0"> |
|
Iridium Browser v2023.09.116 Iridium Browser v2023.09.116 A browser securing your privacy. That’s it.| Iridium Browser is based on the Chromium code base. All modifications enhance the privacy of the user and make sure that the latest and best secure technologies are used. Automatic transmission of partial queries, keywords and metrics to central services is prevented and only occurs with the approval of the user. In addition, all our builds are reproducible and modifications are auditable, setting the project ahead of other secure browser providers. Transparency With Iridium, the whole process is entirely transparent. The public Git repository allows a direct view on all changes made. The complete source code is therefore available. Privacy Iridium Browser has various enhancements where it forces strict security to provide the maximum level of security without compromising compatibility. Deployability We try to distribute it in ways where it allows easy installation and yet allows administrators to deploy it easily. An example is an MSI-based installation mechanism for easy deployments throughout an entire organization. Speed Iridium is just fast in every way. It starts very fast, loads and also renders very complex web sites really fast. Ease of Use Just anybody can use Iridium right away. It is simple and easy to handle, it does not require any special knowledge at all. Motivation There are many browsers out there. Chrome is fast, stable and user-friendly but does not meet many organizations’ demands for privacy. Since the tight integration with its inventor (Google) makes many things easier, it does not comply to restrictive data environments. Iridium is not another new browser from scratch. It takes the Chromium code base and enhances its security and sets certain policies by default. There are many forks of Chromium-based browsers, yet, in our opinion they failed in many other key areas important for adoption. This download is for the Windows 64bit installer version. All other download assets ... |
|
1,309 | Apr 03, 2024 NETitwork GmbH <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/Iridium1_th.png"border="0"> |
|
iSpy 6.3.3.0 iSpy 6.3.3.0 iSpy uses your webcams and microphones to detect and record movement or sound and provides security, surveillance, monitoring and alerting services. Any media that is captured is compressed to flash video and made available, securely over the web. iSpy can be setup to run on multiple computers simultaneously. iSpy is free, open-source software, so if you want it to do anything else, please download the source code and customise it to your requirements. With iSpy you can: Connect and monitor as many cameras and microphones as you like. Import and export object lists to share with colleagues. Connect multiple computers in a group and manage over the web Install iSpy Server and publish your webcam to other instances of iSpy, over your network and to the web Detect, highlight, track and record movement Detect loitering Customise movement detection areas on your cameras Detect and record sound Run any program or send an email or SMS alert when movement or sound is detected Run any program or send an email or SMS alert when movement or sound is not detected (monitor machinery or staff activity) Receive email movement alerts with attached frame grab images from your webcams Periodically receive image grabs via email from your webcams Connect to any device, even webcams attached to other computers with JPEG, MJPEG, IP Cam, webcam and AVI file support Watch live and recorded media over the web (through this website) and also via mobile devices Access and control iSpy remotely Password protect iSpy and hide it in the System Tray Schedule sound and video capturing to start and stop automatically Time-lapse record from any camera Motion track and count moving objects Connect multiple instances of iSpy and iSpy server running on different computers to this website and view all aggregated media online Create groups, invite friends and share access to your webcams and microphones Receive email alerts if your connection goes offline Download the source ... |
|
9,200 | Mar 03, 2015 Developerinabox |
|
IzPack v5.1.3 IzPack v5.1.3 IzPack is a widely used tool for packaging applications on the Java™ platform. Easily make installers that work seamlessly on Microsoft Windows™, Linux™, Solaris™ and Mac OS X™. Keep your users happy just right before they get their hands on your software for the first time. Opensource, since 2001 IzPack is published under the terms of the Apache Software License, Version 2.0, meaning that you can adapt it to your needs with very minimal constraints. IzPack is developed by a community of benevolent contributors. Customizable IzPack does not predefine a rigid installation canvas. You can freely pick the elements that you would like to assemble. You can choose how your installer should look like. Oh, and you can always extend it shall you not find the features you would be looking for! Cross-platform The very same installer works on any operating system where a Java SE™ 6+ virtual machine exists. IzPack-generated installers also provide optional native integration such as creating desktop shortcuts, manipulating a system registry or switching to an administrator account during the installation. IzPack 5.1.3 released Dear community, release 5.1.3 of our latest stable branch is available now. Highlights: JDK 9/10 support for installation Bug fixes and improvements This release adds the following list of changes in particular: New features [IZPACK-1602] - RegistrySpec rootFallback [IZPACK-1619] - Allow previous nav button to be disabled on ShortcutPanel [IZPACK-1620] - Ability to change Next text for summary panel Bug [IZPACK-1469] - WebDir tag is creating packages but installation is failing [IZPACK-1527] - enableOverrideArtifact=true make version append twice to artifact name [IZPACK-1552] - Property substitution issue [IZPACK-1583] - Configurations actions merge decides based on first attribute [IZPACK-1588] - Java 9: ... |
|
4,860 | Feb 11, 2020 IzPack <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/IzPack1_th.png"border="0"> |
|
Jailer v10.2.2 Jailer v10.2.2 Jailer is a tool for database subsetting and browsing. Exports consistent, referentially intact row-sets from relational databases (JDBC). Removes data w/o violating integrity. Generates DbUnit datasets, hierarchically structured XML and topologically sorted SQL-DML Features Exports consistent and referentially intact row-sets from your productive database and imports the data into your development and test environment. Improves database performance by removing and archiving obsolete data without violating integrity. Generates hierarchically structured XML, topologically sorted SQL-DML and DbUnit datasets. Data Browsing. Navigate bidirectionally through the database by following foreign-key-based or user-defined relationships. Open Source. Platform independent. DBMS agnostic. API provides programmatic access to export/import functionality. http://jailer.sourceforge.net/api.html https://github.com/Wisser/Jailer Changelog: 10.2.2 Error "Streaming result set is still active" when a limit is defined on the subject was fixed (MySQL) Click here to visit the author's website. |
|
4,967 | Nov 08, 2020 rwisser <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/Jailer1_th.png"border="0"> |
|
JAlbum 12.1.8 JAlbum 12.1.8 JAlbum makes web albums of your digital images and aims to be the easiest to use and most powerful tool in this category - and free! With JAlbum you have full control of the look of the generated album, not just color theme and basic layout, still making an album is just a matter of drag and drop + a button click if you prefer to use one of the many existing looks. JAlbum will create index pages, slide show pages and process your images and even upload the final album to the Internet so your friends can check it out. Features: Easy to use User Interface: Explorer-like user interface. The order of the buttons left side reflect the workflow. You can easily manage your images, rotate, comment and arrange as you want. Runs on many systems: Jalbum was developed in Java, therefore it runs on every operating system which is capable of running Java, including Windows (all versions), Mac OSX, Linux, Solaris, HP-UX, AIX, OS2. 32 Languages: Jalbum most likely speaks your language - it comes with 32! Skins - endless customization: Skins define the gallery look and functionality. Jalbum has 13 skins built-in with another 120 skins available for download. Add images with drag & drop Adding your images to Jalbum is simple: just drag and drop! Add comments: Use the Comments button to add comments (which may even contain HTML formatting). IPTC and EXIF support: Most Jalbum skins support IPTC and EXIF data to display in your web album. Look for special features, like integration with Google Maps & Earth. Apply filters: Apply filters to your images, like Tint filter, Border, Grayscale, Watermark, Fixed shape, Logotype, Text, Blur, Sharpen, Zoom Other Filetypes: Jalbum supports various types of files*, not just JPG images, and many skins also support movies and audio. * (avi mpg mpeg mpe mp4 mov wmv asf asx wvx 3gp divx xvid qt ... |
|
7,607 | May 15, 2014 David Ekholm |
|
Jami v3 Jami v3 Secure and distributed voice, video and chat platform. Jami is a free and universal communication platform which preserves the user's privacy and freedoms. Audio / Video Calls Screen Sharing Conferences Messaging What makes Jami unique? Jami is completely peer-to-peer and doesn't require a server for relaying data between users. Jami is a GNU project backed by the Free Software Foundation and distributed under a GPLv3 license. We use state of the art end-to-end encryption with perfect forward secrecy for all communications and comply with the X.509 standard. Advantages: Free As in free beer AND as in freedom. Unlimited Without restriction on file size, speed, bandwidth, features, number of accounts, storage or anything else. Ad Free There will never be advertising on Jami. Private All communications are peer-to-peer and end-to-end encrypted. Compatible Available on Linux, Android, AndroidTV, Windows, macOS and iOS. Fast Latency and transfer speeds are greatly reduced thanks to the direct peer-to-peer connection. Autonomous Users who are on the same local network can communicate with Jami even if they are disconnected from the internet. Anonymous No personal information needs to be provided when creating an account. This download is for the Windows version. If you need the MacOS version, download here. If you need the Linux versions, download here. If you need the iOS version, download here. If you need the Android version, download here. If you need the Android TV version, download here. Click here to visit the author's website. |
|
3,017 | Jul 19, 2020 Savoir-faire Linux <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/jami1_th.png"border="0"> |
|
Java Open Chess 1.5 Java Open Chess 1.5 Java Open Chess is a project written in Java in NetBeans IDE. There is possibility to play for 2 players on local computers and via network connection. There is also an option to play versus quite weak computer opponent. Stronger computer opponents will be implemented soon. ATTENTION: Requires Java 1.8 or higher! Features 2 local players game 2 network players game (as client and as server) 1 player mode (versus CPU) Tabbed window - each game in separate tab Each tab can be both client and server in case of network game Save game in chess notation (in both PGN and FEN) Load game in chess notation (in both PGN and FEN) Game clock Chat during network game Partialy themable interface (chessboard and pieces) Move history with move back / move forward in local game and over internet Requires Java 1.8 or higher! |
|
5,587 | Feb 29, 2016 Mateusz Lach <img src="http://www.oldergeeks.com/downloads/gallery/thumbs/Java Open Chess1_th.png"border="0"> |
|
jEdit v5.6.0 jEdit v5.6.0 A programmer's text editor written in Java. jEdit is a programmer's text editor written in Java. It uses the Swing toolkit for the GUI and can be configured as a rather powerful IDE through the use of its plugin architecture. Features Combines the best functionality of Unix, Windows and MacOS text editors. Runs on any operating system with a Java 1.6 or higher virtual machine - this includes MacOS X, Linux, Unix, VMS and Windows. Efficient keyboard shortcuts for everything, with predefined keymaps for Emacs, Intellij IDEA, and Mac OSX (5.0) Comprehensive online help Unlimited undo/redo Copy and paste with an unlimited number of clipboards (known as "registers") Register contents are saved across editing sessions "Kill ring" automatically remembers previously deleted text Rich set of keyboard commands for manipulating entire words, lines and paragraphs at a time "Markers" for remembering positions in files to return to later Marker locations are saved across editing sessions Any number of editor windows may be open, each window may be split into several areas, each area can view a different file and keep track of an independent set of buffers. Alternatively, different locations in one file can be viewed in more than one area Multiple open windows and split windows are remembered between editing sessions Rectangular selection Multiple selection (sometimes known as "discontinuous" or "additive" selection) for manipulating several chunks of text at once Word wrap This download is for the Windows installer version. All other download assets are below: Java: jedit5.6.0install.jar MacOS: jedit5.6.0install.dmg Linux: jedit_5.6.0_all.deb jedit-5.6.0-noarch-1sao.tgz Source: jedit5.6.0source.tar.bz2 Documentation: jedit5.6.0manual-letter.pdf jedit5.6.0manual-a4.pdf Click here to ... |
|
1,295 | Oct 12, 2022 jEdit Development Team <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/jedit1_th.png"border="0"> |
|
JForum2 v2.8.2 JForum2 v2.8.2 An open source, powerful and robust discussion board system implemented in Java. It provides an attractive interface, an efficient forum engine, an easy to use administrative panel, an advanced permission control system and much more. Built from the ground up around an MVC framework , it can be deployed on any Servlet 3.1 container or application server running at least Java 8, such as Tomcat, Jetty and JBoss/WildFly. Its clean design and implementation make JForum easy to customize and extend. There is extensive documentation of all aspects of the software at https://sourceforge.net/p/jforum2/wiki2/Home/ It is freely available under the BSD license, and has recently been awarded the SourceForge "Community Choice" badge. Features Unlimited forums, categories, and topics Support for popular databases like MySQL, PostgreSQL, Oracle, SQLServer and HSQLDB Karma - Rate messages and users Bookmarks - save your favourite threads and share with other users Easy migration from phpBB Friendly URLs (no more long and hard-to-remember links!) Listing of currently online users Listing of the Most Recent topics from the whole forum Fast and scalable, perfect for busy sites - unlike most message board systems, JForum caches frequently accessed data to avoid excessive querying of the database Use 7-Zip to unzip this file. Click here to visit the author's website. |
|
1,772 | Sep 18, 2023 Andowson Chang, Ulf Dittmer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/JForum21_th.png"border="0"> |
|
jGnash v3.5.1 jGnash v3.5.1 A cross-platform personal finance application written in Java. jGnash is a double entry system with support for multiple currencies. jGnash can import OFX and QIF files. Features Double Entry Accounting with reconciliation tools Budgeting with multiple scenario options and export to spreadsheet capability Investment Accounts and automatic import of Stocks, Bond, and Funds price history Nestable accounts with automatic rollup of totals and intelligent handling of mixed currencies OFX, QFX, mt940, and QIF import capabilities Reminders and automatic transaction entry and notifications Intelligent handling of multiple currencies and exchange rates with automatic online exchange rate updates Printable reports with PDF and spreadsheet export capability XML and relational database file formats Operates on any main-stream PC operating system Changes: Release 3.5.1 * 02/20/2020 Corrected a bug with jGnash.exe for Windows Platforms not working. * 02/20/2020 Fixed a bug that was causing icons to no longer work on Windows Platforms. Click here to visit the author's website. |
|
5,979 | Dec 10, 2021 jGnash <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/jGnash1_th.png"border="0"> |
|
Joplin v2.12.17 Joplin v2.12.17 A free, open source note taking and to-do application, which can handle a large number of notes organized into notebooks. The notes are searchable, can be copied, tagged and modified either from the applications directly or from your own text editor. The notes are in Markdown format. Notes exported from Evernote via .enex files can be imported into Joplin, including the formatted content (which is converted to Markdown), resources (images, attachments, etc.) and complete metadata (geolocation, updated time, created time, etc.). Plain Markdown files can also be imported. The notes can be synchronized with various cloud services including Nextcloud, Dropbox, OneDrive, WebDAV or the file system (for example with a network directory). When synchronizing the notes, notebooks, tags and other metadata are saved to plain text files which can be easily inspected, backed up and moved around. The application is available for Windows, Linux, macOS, Android and iOS (the terminal app also works on FreeBSD). A Web Clipper, to save web pages and screenshots from your browser, is also available for Firefox and Chrome. Features • Desktop, mobile and terminal applications. • Web Clipper for Firefox and Chrome. • End To End Encryption (E2EE) • Note history (revisions) • Synchronisation with various services, including Nextcloud, Dropbox, WebDAV and OneDrive. • Import Enex files (Evernote export format) and Markdown files. • Export JEX files (Joplin Export format) and raw files. • Support notes, to-dos, tags and notebooks. • Goto Anything feature. • Sort notes by multiple criteria - title, updated time, etc. • Support for alarms (notifications) in mobile and desktop applications. • Offline first, so the entire ... |
|
3,400 | Sep 15, 2023 Laurent Cozic <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/Joplin1_th.png"border="0"> |
|
Jovial Memos v1.2 Jovial Memos v1.2 Jovial Memos is a lightweight single executable file program and notes (which are referred as memos) editor. Jovial Memos is portable and does not depend on other programs to run. It can also be run off an USB thumbdrive. Features: • Single .exe file • Small footprint at < 50kbytes file size • Single xml file to store all memos • Supports encryption of memos Version Description Version 1.2 (31/08/2018) -------------------------- 1. Added support for multiple memo files. 2. Changed program icon. Click here to visit the author's website. |
|
4,402 | Dec 05, 2019 javahoe <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/Jovial Memos1_th.png"border="0"> |
|
JPGRepair v1.03.0025 JPGRepair v1.03.0025 Fix and Repair corrupt JPEG headers and invalid markers JPGRepair – JPEG Repair Software – JPEG Repair Tool This is the future home of JPGRepair, my software to fix and repair corrupt JPEG headers and invalid markers. In case the header of a JPEG file is corrupt you will not be able to open or view the the file. A JPEG header only represents a tiny amount of the file and that corruption may be beyond this header. For JPGRepair to work the actual image bitstream needs to be detectable. This means JPGRepair needs to find the SOS and EOI markers within the corrupt image. SOS: Start of Scan, “FF DA” in hex. EOI: End if Image, “FF D9” in hex. JPGRepair also repairs invalid markers within the actual image stream. For this it does not depend on a reference file. Free version is functional except for the batch mode being disabled. Example Repair This after repair example file had both a corrupt header and invalid JPEG markers in the image bit stream. Note that this JPEG contains Restart Markers, without these corruption would be more severe: JPEG file with corrupt header and invalid JPEG markers after repair Result after editing (clone stamping) the image using Paint.NET The method to Fix and Repair corrupt JPEG headers JPGRepair uses a simple method to repair JPEG files: User should provide a sample image. This has to be a known good image that was shot with the same camera, using same resolution and orientation (portrait/landscape). Simply place the reference or sample file in the directory containing the corrupt JPEGs. JpgRepair will extract the header from known good sample It then processes the header Merge the processed header with the image bitstream of the ... |
|
4,788 | Oct 28, 2019 DiskTuna <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/JPGRepair4_th.png"border="0"> |
|
JSignPdf v2.2.2 JSignPdf v2.2.2 An open source Java application which adds digital signatures to PDF documents. It also contains Add-On for OpenOffice.org Features • visible and hidden signatures • certificate levels • timestamping • setting PDF rights • command line support for batch processing • certificate revocation checks (CRL, OCSP) Changes: v2.2.2 * Custom OpenPdf build replaced by the official one which should contain all the previous customizations * JRE update in Windows installers * New and updated translations This download is for the Windows version. . If you need the Java/Portable/Any Platform version, download here. If you need the Instructional Guide, download here. Click here to visit the author's website. |
|
2,984 | Feb 06, 2024 Josef Cacek <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/JSignPdf4_th.png"border="0"> |
|
JSONedit v0.9.35 JSONedit v0.9.35 JSONedit is a simple JSON editor with text, tree and list view. Complete application (single executable file) weights about 2 MB (statically linked Lua and Scintilla included), does not require installation and does not depend on any non-standard dll. Settings are stored in .ini file created in application directory, so you can call it portable. Limitations: no Unicode support. Keep in mind that UTF-8 text with characters limited to 0x00 to 0x7F codes (7-bit) is equivalent to ASCII. Also, if you're using additional characters from single codepage only (your Windows default), then external to/from Unicode converter might come to help. Note: UTF-8 support is present in test version 0.10. With some limitations program runs under Linux + WINE. Tested JSONedit 0.8 under WINE 1.3 cannot edit large files (very slow operations comparing to Windows) and has problems with immediate tree redrawing when i.e. cloning node multiple times. WINE 1.6.2 seems to work slightly better. License: freeware (free as in beer). 2020.10.28 Version 0.9.35 text view: add option to disable brace matching (highlighting) alternative, stream-based formatting is used if text could not be formatted in "regular" way as it is not a valid JSON added tSIP buttons configuration JSON examples new subeditor for arrays of objects JSONedit array editor table view with columns corresponding to names of object elements; <N/A> displayed for array elements not being objects double click or [Enter] cell to start editing [Enter], [Up]/[Down] or select another cell to confirm edit, [Esc] to abort editing "reuse tree" option might be recommended when using editor modes ... |
|
4,359 | Oct 29, 2020 Tomasz Ostrowski <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/JSONedit1_th.png"border="0"> |
|
JStock v1.0.7.60 JStock v1.0.7.60 Free stock market software. Make stock investment easy JStock makes it easy to track your stock investment. It provides well organized stock market information, to help you decide your best investment strategy. JStock supports 28 world stock markets. Here are the stock markets being supported. • Argentina • Australia • Austria • Belgium • Brazil • Canada • China • Denmark • Finland • France • Germany • Hong Kong • India • Indonesia • Israel • Italy • Korea • Netherlands • New Zealand • Norway • Portugal • Russia • Singapore • Sweden • Switzerland • Taiwan • United Kingdom • United States Stock Watchlist 28 world stock markets. Portfolio Management Calculate your net worth. Alert Free email, system tray, sound alert. Indicator Filter Search for good stocks. Charting Trace back 10 years history. Cloud Storage Access personal data anytime, anywhere. Currency Exchange Show foreign stocks in local currency. Stock Market News Read individual stock market news. Android Run JStock on Android. This download is for the Windows version. If you need the macOS (x86) version, download here. If you need the macOS (ARM)version, download here. If you need the Linux version, download here. Click here to visit the author's website. |
|
5,893 | Dec 14, 2023 JStock <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/JStock1_th.png"border="0"> |
|
JTOpen - The IBM Toolbox for Java v20.0.7 JTOpen - The IBM Toolbox for Java v20.0.7 IBM Toolbox for Java, an IBM i communications library. What is the Toolbox? JTOpen is the open source software product known as the "IBM Toolbox for Java." It is also commonly referred to "jt400" or simply "the toolbox." In short, this package provides a set of Java classes that enable applications to integrate with IBM i. JTOpen is governed by the IBM Public License. JTOpen is the open source counterpart to a version of the IBM Toolbox for Java that is delivered as part of the 5770-SS1 Licensed Program Product (LPP). The LPP version is supported by IBM and can be obtained from the IBM Toolbox for Java web site. The Toolbox is available as an installable licensed program for IBM i. Here is a breakdown of the supported Toolbox releases versus operating system versions: Changes v20.0.7 JDBC AAF by @jeber-ibm in #147 Loom initial work by @mdg1349 in #125 Fix javadoc generation (#126) by @NicolaIsotta in #141 Bump org.codehaus.mojo:build-helper-maven-plugin from 3.4.0 to 3.5.0 by @dependabot in #142 Bump org.apache.maven.plugins:maven-compiler-plugin from 3.11.0 to 3.12.0 by @dependabot in #148 Bump org.apache.maven.plugins:maven-compiler-plugin from 3.12.0 to 3.12.1 by @dependabot in #149 fix: DDM signon with passwords greater than 10 chars by @ThePrez in #152 Added methods to ISeriesNetServer to work with disabled IDs by @MikSwens in #151 Fix NPE when using password in Properties by @jeber-ibm in #158 feat: build native package for JDKs 7, 8, and 11 by @ThePrez in #153 doc-files fixes and modernization by @NicolaIsotta in #150 Fixup build to make jar contents match 11.x by @ThePrez in #159 Click here ... |
|
1,352 | Mar 07, 2024 IBM <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/ToolboxJava1_th.png"border="0"> |
|
JumpListsView v1.16 JumpListsView v1.16 JumpListsView is a simple tool that displays the information stored by the 'Jump Lists' feature of Windows 7 and Windows 8. For every record found in the Jump Lists, the following information is displayed: The filename that the user opened, the date/time of the file opening event, the ID of the application that was used to open the file, the size/time/attributes of the file on the time that the file was opened, and more... You can also export the Jump Lists records to csv/tab-delimited/xml/html file. System Requirements This utility works on Windows 7, Windows 8, and Windows 10. Both 32-bit and 64-bit systems are supported. On previous version of Windows, the 'Jump Lists' feature doesn't exist, and thus JumpListsView won't display any data, but... You can still read data from external hard-drive containing installation of Windows 7/8 by using the 'Advanced Options' window. Jump Lists Folders The jump lists information is stored under the following folders: C:\Users\[User Profile]\AppData\Roaming\Microsoft\Windows\Recent\AutomaticDestinations C:\Users\[User Profile]\AppData\Roaming\Microsoft\Windows\Recent\CustomDestinations Currently, JumpListsView only reads the information from the AutomaticDestinations folder. Changes: UPDATED 03/26 Patch My PC Updater 4.0.1.4- Scans for outdated programs & patches them. Start Using JumpListsView JumpListsView doesn't require any installation process or additional dll files. In order to start using it, simply run the executable file - JumpListsView.exe After running JumpListsView.exe, it scans the jump lists on your system and displays the information on the main window. You can select one or more items, and then export them to xml/html/csv/tab-delimited file. You can also copy the selected items to the clipboard (CTRL+C) and the paste the data into Excel or other spreadsheet application. JumpListsView Columns Filename and Full Path: The filename that the user probably opened. Record Time: Specifies the date/time that the user probably opened the specified filename. Created Time, Modified Time, ... |
|
4,880 | Sep 14, 2019 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/jumplistsview1_th.png"border="0"> |
|
K9 Web Protection Password Cracker v1.0 K9 Web Protection Password Cracker v1.0 Free tool that reads your K9 Web Protection's license file, and reverses the password encryption algorithm to figure out your password; it "hacks" your password. This, in turn, allows you to uninstall K9 Web Protection. From the author: This application was created as a result of me forgetting my password for a K9 Web Protection installation. In searching for a solution, I came across Dietrich's research on the program's password encryption algorithm. I proceeded to try and decrypt my password file using some quick C++ code, and when it did work, decided to code a small console application. The application automatically searches in two possible password file installation locations and uses a reverse algorithm to attempt password recovery. Click here to visit the author's website. |
|
1,822 | Feb 25, 2022 Isaac Litzenberger <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/K9PassCrack1_th.png"border="0"> |
|
Karen's Replicator v3.7.6 Karen's Replicator v3.7.6 The Backup Utility for Windows. Automatically backup files, directories, even entire drives! Karen's Replicator copies selected files from one drive/folder to another. Source and Destination folders can reside anywhere on your network. Options include: Repeated copies at intervals as short as a few minutes, or as long as several months Copying only the files that have changed Removing folders and files from the destination if they have been deleted from the source Ability to exclude files, specifying which files should not be copied Ability to exclude days, specifying which days a job should be skipped MD5 536055da1a162735889daf7fd02bc97b SHA-1 0f98d93b19ce03d3e1aa7906c28340bfa33a9384 SHA-256 5e184321148bb2c6f46f9934403f42a347f5cddd7a34a0c4518df09992a846dc Enhancements/Bugs Fixed Version 3.7.6 2020-05-25 Fixed logic error in ApiFolderExists(): On some machines reports a missing folder as exists, so the destination folder isn't created. Literally: Error 3 - The system cannot find the path specified Now able save Unicode characters to the log file Delay removed from most progress strings while running Click here to visit the author's website. |
|
2,188 | Aug 12, 2021 Karen Kenworthy <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/karens-replicator1_th.png"border="0"> |
|
Kate v23.0.8.4 Build 2299 Kate v23.0.8.4 Build 2299 A free, open source and feature-packed text editor for Windows, macOS and Linux. Kate is packed with features that will make it easier for you to view and edit all your text files. Kate lets you to edit and view many files at the same time, both in tabs and split views, and comes with a wide variety of plugins, including an embedded terminal that lets you launch console commands directly from Kate, powerful search and replace plugins, and a preview plugin that can show you what your MD, HTML and even SVG will look like. Make Your Code Pretty With Syntax Highlighting Kate supports highlighting for over 300 languages making it easier to read code in almost all programming languages. Kate also understands how brackets works and will help you navigate inside complex code blocks hierarchies. On-the-fly spellchecking is also included and will help you check your text before publishing. Multi-cursor editing Boost your productivity with a help of multi-cursor and multi-selection features. Kate now has it! Switching from other proprietary text editors and missing your hotkey bindings you used to? You can configure every hotkey in Kate so you don't even have to retrain yourself. Work on Complex Projects Efficiently Work on multiple files at the same time with split views. Use the project sidebar to navigate your project directory structures and use Kate's smart tabs to quickly access your recently opened documents. The powerful search and replace tool lets you quickly search inside your entire projects. Develop your Next Application with Kate Kate is the perfect tool for programming as it includes autocompletion for many languages with the help of the Language Server Protocol (LSP). The editor has been optimized for editing code and provide scriptable auto indentation, VI input mode, rectangular block selection mode, smart comment and uncomment handling and ... |
|
998 | Feb 04, 2024 Kate KDE Team <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/kate1_th.png"border="0"> |
|
KB6IBB SWL Logger v4.5 KB6IBB SWL Logger v4.5 A shortwave radio listener's log book. The KB6IBB SWL Logger is a program designed for the shortwave radio listener. It offers shortwave specific logging of stations, with most tasks handled automatically. The program also incorporates the use of EiBi shortwave database for logging and looking up various known shortwave stations world wide. Features • Supports Windows 11 (64 bit) with minimum screen size of 1920x1080. • SWL Logger operates in the UTC time zone transparently. No need to configure timezones or offsets specifically for SWL Logger. • SWL Logger incorporates the EiBi Shortwave Database. Logging a station has never been easier. Look up the station by frequency in the EiBi database, then click the log entry button. • SWL Logger includes HF Propagation data NOAA/WWV • Most tasks are completed automatically. Click here to visit the author's website. |
|
759 | Jul 20, 2023 Jeff Stillinger <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/SWL1_th.png"border="0"> |
|
Keppi v3.82 Keppi v3.82 An open source simple music visualizer, written in the C# language. It requires .NET Framework 4.5 to run. Changes in version 3.82 ----------------------- * Track list extraction improvements. * Added detection for AC-3 codec. * Fixed crash with YouTube videos. * Fixed crash when metadata character set detection fails. System requirements ------------------- * Windows 7 or above * .NET Framework 4.5 This download is for the 64bit version. If you need the 32bit version, download here. Click here to visit the author's website. |
|
3,708 | Nov 17, 2021 jyrkive <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/Keppi3_th.png"border="0"> |
|
KeyboardStateView v1.00 KeyboardStateView v1.00 KeyboardStateView is a simple tool for Windows that displays the current state and virtual key code of every key you press. It also allows you to view the current state of all keyboard keys. For every key, the following information is displayed: Key Name (VK_XXXX ), Description, Key Code (Decimal), Key Code (Hexadecimal), Key Pressed Status, Key Toggled Status (Useful for Num Lock, Caps Lock), and last time that the key was pressed. Start Using KeyboardStateView KeyboardStateView doesn't require any installation process or additional DLL files. In order to start using it, simply run the executable file - KeyboardStateView.exe After running KeyboardStateView, every key that you press on your keyboard is displayed on the main window of KeyboardStateView, even when KeyboardStateView is not in focus. If you want to view the state of all keys, simply turn off the 'Show Only Keys Pressed In Last seconds' option (Under the Options menu) Translating KeyboardStateView to other languages In order to translate KeyboardStateView to other language, follow the instructions below: Run KeyboardStateView with /savelangfile parameter: KeyboardStateView.exe /savelangfile A file named KeyboardStateView_lng.ini will be created in the folder of KeyboardStateView utility. Open the created language file in Notepad or in any other text editor. Translate all string entries to the desired language. Optionally, you can also add your name and/or a link to your Web site. (TranslatorName and TranslatorURL values) If you add this information, it'll be used in the 'About' window. After you finish the translation, Run KeyboardStateView, and all translated strings will be loaded from the language file. If you want to run KeyboardStateView without the translation, simply rename the language file, or move it to another folder. License This utility is released as ... |
|
3,353 | Jul 02, 2020 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/keyboardstateview1_th.png"border="0"> |
|
KeyScrambler 3.8.0.0 KeyScrambler 3.8.0.0 KeyScrambler encrypts your keystrokes deep in the kernel, foiling keylogging attacks with scrambled, undecipherable data. This advanced method of keystroke protection defeats both known and unknown keyloggers. The friendly interface displays realtime encrypted stream of keystrokes so you see when and how KeyScrambler is working. Strengthens where defenses are the weakest in your traditional anti-virus, anti-malware programs and PC security. Compare Editions A free browser add-on, KeyScrambler Personal protects all your inputs in IE, Firefox, and Flock. KeyScrambler Pro and Premium are paid programs that protect a wide array of apps. How It Works KeyScrambler encrypts your keystrokes at the keyboard driver level and decrypts them at the destination application, giving keyloggers "scrambled," useless keys to record. For Online Games Both KeyScrambler Pro and Premium protect your player's IDs, passwords and digital assets in over two dozen online games. For Business Read how and why KeyScrambler is important for your business. KeyScrambler Premium protects critical systems and reduces risks of information theft at the workplace. Features KeyScrambler defeats known and unknown keyloggers; also protects Chinese, Japanese, and Korean inputs; is compatible with other security programs, tokens and smart cards; and requires no user effort. How To The user-friendly interface allows you to do things on KeyScrambler for a more comfortable, personalized fit. Supports: Advanced Browser, AM Browser, AOL Explorer, AOL 9, Avant, Comodo Dragon, Comodo IceDragon, CometBird, Crazy Browser, Firefox, Flock, Google Chrome, Internet Explorer, K-meleon, Maxthon, MSN Explorer, Netscape, Orca Browser, Opera, Safari, Seamonkey, SlimBrowser, SR Iron Browser, TheWorld Browser, Palemoon, Lunascape, RockMelt, WaterFox, and Yahoo Browser. |
|
7,578 | Jul 29, 2015 QFX Software <img src="http://www.oldergeeks.com/downloads/gallery/thumbs/Windows8_Login_th.png"border="0"> |
|
Kickass Undelete v1.5.5 Kickass Undelete v1.5.5 Kickass Undelete is a free, fully featured, file recovery tool for Windows. Accidentally deleted a file? Never fear; the data is probably still on your drive and may be recoverable. Kickass Undelete finds all of the deleted files on your hard drive, flash drive or SD card and allows you to recover them. Disclaimer: Undeletion works best if performed as soon as possible after file deletion. When you delete a file, the data is not lost - but new files being written to the hard drive may overwrite your data permanently, making recovery impossible. Features: Free and Open Source Support for both FAT and NTFS filesystems Filter by filename and extension Easy-to-use interface Unreasonably large scan button Developers Joey Scarr Josh Oosterman Lukas Korsika Kickass Undelete Release Notes ================================================== Version 1.5.5 - 2018-12-10 Changes: * Fixed a crash when failing to parse an attribute. Click here to visit the author's website. |
|
5,341 | Feb 05, 2020 Joey Scarr and Team <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/Kickass Undelete4_th.png"border="0"> |
|
KillEmAll (command line) v21.11.12.1 KillEmAll (command line) v21.11.12.1 KillEmAll is a ‘panic‘ button with an ‘ask questions later‘ attitude, designed to identify and terminate all non-essential running programs. Great for quickly closing unwanted apps, system inspection, and even malware removal! Why Use It? The best usage case for KillEmAll to most users is to close all open web browser windows if you get a suspected malicious popup while visiting a website. The the reason you don’t simply close or “X out” the popup is because malicious code can be run even if you click the X button — it is after all just another button, you might as well be clicking “OK” or “Yes, please do what you want with my PC…” but if you don’t click anything and KillEmAll does the work, forcing the application’s process to close without any additional code execution. Other tasks that benefit from the advantage of quickly and forcefully closing all applications: before performing maintenance on your PC, before and during general troubleshooting, or before playing resource intensive games. General Usage: Simply run the .exe (from anywhere, even a flash drive or network path) and then press a key to terminate unnecessary programs running under any standard user account, or alternately you can press ‘D‘ for Debug mode (more on that below.) If your Windows is configured with UAC enabled (default) then you can right-click and choose Run as Administrator to kill all other programs running under an Administrator/System account. If started via Windows Explorer, KillEmAll will display a ‘press any key to exit’ prompt when completed, giving you the option to press ‘L‘ to generate a log file. When started from a console window you ... |
|
2,631 | Nov 19, 2021 d7xtech.com <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/KillEmAll_Mini1_th.png"border="0"> |
|
Kitchen Garden Aid v2.2.12 Kitchen Garden Aid v2.2.12 An easy to use application to design your kitchen garden or your house farm. Helps you plan your plants ( vegetables, fruit trees, herbs, flowers ) so that it respects the rules of crop rotation and companion planting. Based on square foot gardening. The windows installer contains all necessary files. A Linux and Mac package contains scripts and instructions to install the dependencies, and run KGA. If you download the jar directly, you must have Java 9+, including javafx. Oracle and OpenJDK java runtimes no longer include javaFX, and it must be separately installed. Alternatively https://www.azul.com/downloads/zulu-community/ is a JRE that provides a free 'JRE FX' installable that includes java and javafx. Installing it is the easiest way to run KGA on another OS. Features Draw your kitchen garden Keeps track of crop rotation and companion planting Square foot gardening visualization Seed manager track variety of plant This download is for the Windows Installer version. All other download assets are below: MacOS: KitchenGardenAid-Macosx-2.2.12.zip Linux: KitchenGardenAid-Linux-2.2.12.tgz Java jar file: KitchenGardenAid-2.2.12.jar Click here to visit the author's website. |
|
3,880 | Jan 09, 2022 Stephen Atwell <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/KitchenGardenAid1_th.png"border="0"> |
|
KiTTY v0.76.1.13 KiTTY v0.76.1.13 A fork from version 0.76 of PuTTY, the best telnet / SSH client in the world. KiTTY is only designed for the Microsoft® Windows® platform. For more information about the original software, or pre-compiled binaries on other systems, you can go to the Simon Tatham PuTTY page. KiTTY has all the features from the original software, and adds many others as described below: The very first requested features: • Sessions filter • Portability • Shortcuts for pre-defined command • The session launcher • Automatic logon script • URL hyperlinks Technical features: • Automatic password • Automatic command • Running a locally saved script on a remote session • ZModem integration (experimental) Graphical features: • An icon for each session • Send to tray • Transparency • Protection against unfortunate keyboard input • Roll-up • Always visible • Quick start of a duplicate session • Config Box Other features: • Automatic saving • SSH Handler: Internet Explorer integration • pscp.exe and WinSCP integration • Binary compression • Clipboard printing • The PuTTYCyg patch • Background image • File association • Other settings • New command-line options Bonus: • A light chat server is hidden in KiTTY A hidden text editor is integrated into KiTTY Changes: v0.76.1.13 fix OSC52 popup is ... |
|
6,388 | Apr 03, 2024 9bis Software <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/kitty_th.png"border="0"> |
|
Klavaro Touch Typing Tutor v3.13 Klavaro Touch Typing Tutor v3.13 A very efficient tutor. A touch typing tutor that's very flexible, supporting customizable keyboard layouts. You can edit and save new or unknown keyboard layouts, as the basic course was designed to not depend on specific ones. Also, there are some charts about the learning process. Features • Multi-keyboard • Multi-language • 4 types of practicing activities • Introduction tips • Internet contest • Accepts external text Important note: Right-click and choose to "Run as Administrator" to install the program. Click here to visit the author's website. |
|
4,045 | May 23, 2023 felipo <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/Klavaro1_th.png"border="0"> |
|
Kodi v20.0 Nexus Kodi v20.0 Nexus The ultimate entertainment center software. Kodi spawned from the love of media. It is media center and entertainment hub that brings all your digital media together into a beautiful and user friendly package. It is 100% free and open source, very customisable and runs on a wide variety of devices. It is supported by a dedicated team of volunteers and a huge community. It allows users to play and view most videos, music, podcasts, and other digital media files from local and network storage media and the internet. Kodi's forums and Wiki are bursting with knowledge and help for the new user right up to the application developer. Kodi is the ultimate entertainment center software. It plays almost every kind of media you can find and it looks great while doing it! This is just a few things Kodi excels at, why not try it yourself today? Music Kodi can play all your music including mp3, flac, wav and wma formats. It has cue sheet, tag reading support and smart playlists for ultimate control of your music collection. Movies Kodi can do Movies too! Supporting all the main video formats including streamable online media, Kodi can import, browse and play your Movie collection with ease. TV Shows The TV Shows library supports episode and season views with posters or banners, watched tags, show descriptions and actors. Great for keeping track of your progress. Photos Import pictures into a library and browse the different views, start a slideshow, sort or filter them all using your remote control. PVR Kodi allows you to watch and record live TV all from easy to use interface. It works with a number of popular backends including MediaPortal, MythTV, NextPVR, Tvheadend and many more. Skin Kodi allows you to completely change the whole appearance of the interface with skins. We have no doubt that you will find something ... |
|
4,057 | Dec 22, 2022 The Kodi Foundation <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/Kodi1_th.png"border="0"> |
|
Kopia v0.13.0 Kopia v0.13.0 An open source backup tool for Windows with fast, incremental backups, client-side end-to-end encryption, compression and data de-duplication. Kopia is a fast and secure open-source backup/restore tool that allows you to create encrypted snapshots of your data and save the snapshots to remote or cloud storage of your choice, to network-attached storage or server, or locally on your machine. Kopia does not 'image' your whole machine. Rather, Kopia allows you to backup/restore any and all files/directories that you deem are important or critical. Pick the Cloud Storage Provider You Want Kopia supports saving your encrypted and compressed snapshots to all of the following storage locations: • Amazon S3 and any cloud storage that is compatible with S3 • Azure Blob Storage • Backblaze B2 • Google Cloud Storage • Any remote server or cloud storage that supports WebDAV • Any remote server or cloud storage that supports SFTP • Some of the cloud storage options supported by Rclone -Requires you to download and setup Rclone in addition to Kopia, but after that Kopia manages/runs Rclone for you -Rclone support is experimental: not all the cloud storage products supported by Rclone have been tested to work with Kopia, and some may not work with Kopia; Kopia has been tested to work with Dropbox, OneDrive, and Google Drive through Rclone • Your local machine and any network-attached storage or server • Your own server by setting up a Kopia Repository Server • Uses data de-duplication to save storage costs. Click here to visit the author's website. |
|
791 | Jun 23, 2023 Kopia Project <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/Kopia1_th.png"border="0"> |
|
Kraken v1.5 Kraken v1.5 Free RAR, ZIP, 7-Zip and Hash password recovery tool for Windows. Kraken is a free, fast and small RAR, ZIP, 7-Zip and Hash password recovery tool for Windows without a fancy GUI for maximum performance, no trial, no limits! Kraken is easy to use and portable as no installation is needed. Just unpack, add your password protected RAR, ZIP, 7-Zip or hash string and unleash the Kraken! Features Free! No sneaky trial periods, no limits! Recovers RAR, ZIP and 7-Zip compressed files RAR and ZIP, 7-zip filesize does not impact recovery speed Installations of WinRAR, WinZip or 7-Zip not required! Option to extract recovered files Recovers MD5, SHA1, SHA256, SHA384, SHA512 & BCrypt No GUI for high performance Easy to use Option to set recovery speed Option to use Bruteforce or Dictionary recovery Option to run unlimited dictionaries in a sequence Select between pre-defined charsets or define your own Option to set min/max password length Option to set a Prefix/Suffix Autosave progress feature Option to continue recovery Automatic backup of recovered passwords Option to check for updates Requirements Windows with .NET 4.7.1 (no need for Windows 10/11 users) To use: 1) Run Kraken_v1.5.exe and select "More info" then click "Run anyway" in the Windows Defender Smartscreen prompt. 2) Agree to the terms and conditions and select destination to Extract Kraken Click here to visit the author's website. |
|
1,633 | Oct 28, 2022 Nick Swardh <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/Kraken1_th.png"border="0"> |
|
ksnip v1.7.3 ksnip v1.7.3 Ksnip is a Qt based cross-platform screenshot tool that provides many annotation features for your screenshots. Features Supports Linux (X11, KDE Wayland and Gnome Wayland), Windows and MacOS Taking screenshot of a custom rectangular area that can be drawn with mouse cursor. Taking screenshot of the screen/monitor where the mouse cursor is currently located. Taking screenshot of full screen, including all screens/monitors. Taking screenshot of window that currently has focus. Taking screenshot of window under mouse cursor. Take screenshot with or without mouse cursor. Capture mouse cursor as annotation item that can be moved and deleted. Customizable capture delay for all capture options. Upload screenshots directly to imgur.com in anonymous or user mode. Upload screenshots via custom user defined scripts. Command line support, for taking screenshot and saving it to default location, filename and format. Customizable default location, filename and format for saving new screenshots with wildcards for Year ($Y), Month ($M), Day ($D) and Time ($T) and Counter (multiple # characters for number with zero leading padding).. Print screenshot or save is to pdf/ps. Annotate screenshots with pen, marker, rectangles, ellipses, texts and other tools. Annotate screenshots with stickers and add custom stickers. Add watermarks to captured images. Global HotKeys for taking Screenshots (Currently only for Windows and X11). Tabs for Screenshots and images. Open existing images via dialog, drag-and-drop or paste from clipboard. Run as single instance application (secondary instances send cli parameter to primary instance). Many configuration options. Languages French, Dutch, Polish, Norwegian, German, Spanish, Russian This download is for the Windows version. If you need the MacOS version, download here. If you need the Linux version, download here. Click here to visit the author's website. |
|
2,751 | Oct 21, 2020 Damir Porobic <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/ksnip1_th.png"border="0"> |
|
LabChirp v1.60 LabChirp v1.60 Sound effect generator A program for creating sound effects for games, music, videos - whatever you want! A manual and some example sounds are included to get you started are on labbed.net/software/labchirp/manual/ Works on Windows (requires .NET Framework 2.0) and other platforms through Mono. Features Multiple channels: Up to eight individual channels. All or any element of a channel can be copied to another. Modulation: For vibrato and tremolo (pulsating variation in pitch and volume). Envelopes: To shape everything the way you want it. Waveforms: Make your own custom waveforms, or use any of the standard ones (sine, triangle, sawtooth, square, noise). Effects: Add cool post-effects to your sound. Customizable randomizer: For the lazy sound designer. Customizable mutator: To randomize your sound slightly. Batch save: If you are in a hurry and need a lot of sounds fast. Here is a demo in mp3 format showing all of the example sounds and some randomly generated sounds using different presets. labbed.net/software/LC-demoroll3.mp3 Changelog v1.60 Improved mutator! Batch save has been added to Mutator, and the option to randomly change waveform. Higher precision! A second decimal place has been added to frequency and volume/amplitude of all waves. Higher frequencies! All waves' frequencies can now go up to 9999.99 Hz. Better Mac compatibility! Mac users should now be able to hear the sound when pressing play. Better visuals for envelopes! Envelopes are now filled (with configurable opacity). Bug fixes! Changing sample rate while sound ... |
|
4,135 | Oct 17, 2020 Labbed.net <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/LabChirp1_th.png"border="0"> |
|
Lain v3.2 Lain v3.2 Simple and portable password manager tool. Lain is a free, minimal, secure and portable password manager for Windows. Features: • Features AES256 and SHA256 cryptography • Random password generator included • Automatic lock when inactive • Start with Windows option • Custom salt override (using command-line or a file) Note: This program has 3 hits on VirusTotal These are false positives. The program is safe. Compatibility: • .NET Framework 4.5.2 • Compatible with Windows 7, 8.1, 10, 11 • Does not work with Windows XP or Vista Click here to visit the author's website. |
|
715 | Aug 23, 2023 hellzerg <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/Lain2_th.png"border="0"> |
|
LAN Messenger 1.2.35 LAN Messenger 1.2.35 LAN Messenger is a free and open source cross-platform instant messaging application for communication over a local network. It does not require a server. A number of useful features including event notifications, file transfer and message logging are provided. Features Personal and group messaging File transfer Message history Notification alarms Message encryption Multilanguage user interface Changelog: LAN Messenger 1.2.35 Postby hitmaneidos » Wed Jul 25, 2012 7:01 am LAN Messenger 1.2.35 is now available for Windows. The Linux and Mac versions will be online as soon as their testing is completed. This version adds a few features that have been requested on the boards by several users. Change log for version 1.2.35: [New]: Added folder transfer feature. Now you can just drag and drop folders to the chat window or use the "Send Folder" button to send folders to your contacts. [New]: Added an option to enable/disable clearing messages when the chat window is closed. This is enabled by default. If you want your messages back when the window is reopened, un-check this option in Preferences->Messages. [New]: All windows can now be closed by pressing the Escape key. This improves window navigation. [Misc]: Other minor UI and bug fixes. Note: Some of the subsystems have been reworked for improved performance and memory optimization. Certain features like file transfer and group messaging may be disabled with contacts using an older version of LAN Messenger. I urge everyone to upgrade to this new version as soon as convenient. |
|
5,187 | Oct 30, 2016 hitmaneidos <img src="http://www.oldergeeks.com/downloads/gallery/thumbs/LAN Messenger1_th.png"border="0"> |
OlderGeeks.com Copyright (c) 2024
