Buy our over-priced crap here to support this project. 
Follow @GeekOnTheLoose
Buy our over-priced crap here to support this project.
Follow @GeekOnTheLoose
| Files | ||||
| File Name | Rating | Downloads | ||
 |
Batch Scripting Pack 1.0 Batch Scripting Pack 1.0 Collection of Open Source programs written in Batch Scripting Language Do you like to write scripts in Batch Scripting Language? If yes, then this project is dedicated to you. This pack contains source codes of utilities programmed in the Batch Programming Language which are now available for you so that you can improve and learn from them. v1.0 | Open Source | Supports all Windows Versions Batch Scripting Pack v1.0 contains the following programs: RAR Cracker This utility was coded by me to perform brute force attacks against the password protected RAR archives. The code is simple and easy to learn. This utility was never completed because of some limitations. This utility at this time can only crack numerical passwords. You can upgrade it to use a word list for finding right password. Drive Fixer Drive fixer was developed to check & fix file system errors. It uses Windows built in utility "CheckDisk" to perform this task. It can be used to learn how to use Windows utilities in your program. Hiber Plus Hiber Plus was a small utility developed to enable and disable hibernation feature of Windows. It has only a few lines of code and will teach you how to use the Windows Command Prompt commands in the program. Holes Patcher A security utility developed to make the installed Windows OS more secure. Modifies Windows settings like services and features in such a way that the OS becomes difficult to hack. Its not the most complete project but, it works. I hope you can improve it. Processor Changer Processor Changer was a small tool I wrote just for fun with my college buddies. It can change the processor name, etc by some registry ... |
 |
1,029 | Jan 14, 2018 Malik Usman Aura  |
|
Bluelife Hosts Editor 1.2 Bluelife Hosts Editor 1.2 When you type a domain name in your browser that you wish to connect to, your application must first convert it to an IP address that it will use to connect to.The way these hostnames are resolved to their mapped IP address is called Domain Name Resolution. On almost all operating systems whether they be Apple, Linux, Unix, Netware, or Windows the majority of resolutions from domain names to IP addresses are done through a procedure called DNS. DNS stands for Domain Name System and is the standard domain name resolution service used on the Internet , There is another way to resolve domain names without using the Domain Name System, and that is by using your HOSTS file. Almost every operating system that communicates via TCP/IP, the standard of communication on the Internet, has a file called the HOSTS file. This file allows you to create mappings between domain names and IP addresses Another way to think of a hosts file is as an address translator and redirector. Bluelife hosts editör is a Portable Freeware hosts-file editor and Allows you to easily add/delete , Block , Update domain names to your hosts file , Simply type the hostname you wish to add and use “Resolve domain name and add in to the list” button then use Save button if you want to Block a domain name you can just use “Add or edit entry” button then use Save button , you can also use the right click menu to block , unblock … domain names BlueLife Hosts editor v1.2 has also Command Line Parameters support Changelog v1.2 [ Fixed ] – If the attributes of the hosts file changed to system , Save function doesn’t work |
|
3,117 | Aug 09, 2018 Sordum.org  |
|
CHMOD Calculator 1.0 CHMOD Calculator 1.0 CHMOD Calculator is a really, really simple tool that lets you check a few boxes and tells you how what number to use to chmod a file on a *nix based system for access. There’s not really much more to say about this. If you are looking for this tool, then it will help you. If you have no idea what it does, then you probably do not need it. CHMOD Calculator requires the Microsoft .NET 2.0 Framework or Wine with Mono. Supported/Tested Operating Systems: Windows® 7, 8, 8.1, 10, Xubuntu |
|
972 | Aug 09, 2018 HazteK Software  |
|
DeviceTool v1.1.0.18 DeviceTool v1.1.0.18 DeviceTool is a Device Manager for administrators. DeviceTool can enable and disable devices remotely - and run on Windows 10. A short overview: Display installed devices - with properties Enable and disable local devices Enable and disable devices on remote computers Portable tool - no installation required Runs on Windows 7/8/10 and Windows Server 2008/2012/2016 (32 and 64 bit) Free - for private and commercial use The features Display devices Displays all Windows devices (like Windows Device Manager) Displays the most important properties Displays devices of remote machines extremely fast Device classes filter for better overview Refreshs automatically (manual refresh with F5) Enable/disable devices Enables/disables devices with right mouse button Enables/disables devices of remote computers Advanced Open by command line (with parameter hostname and filter word) History of recent computers System requirements DeviceTool runs on Windows 7/8/10 and Windows Server 2008/2012/2016 (32 or 64 bit). It requires .NET-Framework 4. Additional tools DeviceTool consists of 4 files. For full functionality (remote enabling/disabling) you need the file psexec.exe from Microsoft TechNet (free download): https://technet.microsoft.com/de-de/sysinternals/bb897553.aspx FAQ ► How does DeviceTool work? DeviceTool connects on TCP port 135 to get device information via WMI (Windows Management Instrumentation). It displays the devices in the GUI. Further information in the DeviceTool help page. ► Do I need additional tools? Only if you would like to enable and disable devices remote. Then you need file psexec.exe in the DeviceTool folder. You can download psexec.exe for free at: https://technet.microsoft.com/de-de/sysinternals/bb897553.aspx ► How much does DeviceTool cost? DeviceTool is free of charge - even for commercial use. ► What's new in version 1.1.0.18 (Feb-27-2019)? DeviceTool is now able to display ... |
|
1,122 | Mar 07, 2019 Lugrain Software GmbH  |
|
DShutdown v1.77.1 DShutdown v1.77.1 VirusTotal has 3 hits out of 60 showing this file contains malware. This is a false positive. The file is safe. DShutdown is a stand-alone program that allows you to easily shutdown and wake up local or remote PCs, with many specific options. DShutdown supports more than just standard shutdown options, there are options relating to "pure" shutdown (such as the "force after wait" option which causes a forced, but 'clear' shutdown). There are monitoring options that allow you to shutdown a PC after a particular application terminates (useful at the end of compressing several files). There are also options to shutdown a PC when Internet traffic reduces below a particular data-rate (useful to shutdown a PC when it has finished a large download). It is also possible to intercept a shutdown request, initiated by the user or an application, and to then execute the shutdown request with selected options from DShutdown. (For example: to simultaneously shut down all Lan PCs when the server shuts down). DShutdown doesn't force a power-off without logging off and saving settings. DShutdown instead provides a means to log-off, shutdown and safely power-off your PC. Administrators who use roaming profiles will appreciate the benefits of this feature. (Windows 9x/NT/2000/XP/Vista/Seven/8/Win10) MODE 1 1. On local PC start 'DShutdown.exe'. 2. Select 'Server less mode' option 3. Set 'Remote User' and 'Remote Password' of a remote user that own shutdown privileges on remote PC you want shutdown. MODE 2 1. Install 'RDShutdown.exe' on remote PC (you can use 'RDShutdown Setup Utility.exe' to set a password). 2. On local PC start 'DShutdown.exe' (if you have set a password you must put it on 'Remote Password' box). |
|
1,628 | Feb 24, 2019 Dimio  |
 |
Enable/Disable Remote Desktop on Remote System Enable/Disable Remote Desktop on Remote System For those times when you need to remote into a system and remote desktop is disabled, the below script can come in very handy. |
|
1,121 | Aug 09, 2018 Musings of an IT Pro  |
 |
Get-RemoteProgram v1.4.1 Get-RemoteProgram v1.4.1 Get list of installed programs on remote or local computer. This is a script file. Right click and save target or link to download. Left click to open script file. This script generates a list by querying the registry and returning the installed programs of a local or remote computer. It allows for retrieval of additional properties such as the uninstall string of an application as well. Load the function into memory by dot-sourcing the script file this makes the Get-RemoteProgram function available in your current session of PowerShell This command will generate a list of installed programs on local machine. This command will generate a list of installed programs on server01 and server02. This command lill gather the list of programs from Server01 and attempts to retrieve the displayversion and versionmajor subkeys from the registry for each installed program This command will retrieve the installed programs on server01/02 that are passed on to the function through the pipeline and also retrieves the uninstall string for each program Code provided by Georges Zwingelstein, to display the installed programs ordered by Installed programs, installed updates or system components. Will retrieve the installed programs on server01/02 that are passed on to the function through the pipeline and also retrieves the uninstall string for each program. Will only display a single entry of a program of which the first four words are identical. Synopsis: .PARAMETER ComputerName The computer to which connectivity will be checked .PARAMETER Property Additional values to be loaded from the registry. Can contain a string or an array of string that will be attempted to retrieve from the registry for each program entry .PARAMETER IncludeProgram This will include the Programs matching that are specified as argument in this parameter. Wildcards are allowed. Both Include- and ExcludeProgram can be specified, where IncludeProgram will be matched first .PARAMETER ... |
|
145 | Feb 19, 2019 Jaap Brasser  |
|
Google DDNS Updater v2 Google DDNS Updater v2 Auto update Google Domain Dynamic DNS (DDNS) services IP address . Description V2 Beta Features: (Release on 18/07/2016) - Apply to Google Domain Dynamic DNS (DDNS) services - Support to update 3 domains as the same time - Provide 2 servers to get the external IP address - Auto update in specified minutes (Max:10000 Mins) - Able to minimize to system tray - Able to Save or Load the settings - Able to Save Log as txt file Changes between V1.0.0.0 (Released on 18/07/2016) and V2 Beta - Supported number of domain from 1 domain increase to 3 domains - Update and add one more servers for getting the external IP address - Open the settings for user to specified the interval of auto update - Fix the minimize to system tray function - More details log - Add save log as txt file function |
|
1,292 | Aug 09, 2018 nylryan  |
|
Hardlink Shell Extension 32bit 3.8.6.8 Hardlink Shell Extension 32bit 3.8.6.8 The NTFS file system implemented in NT4, Windows 2000, Windows XP, Windows XP64, and Windows7/8/10 supports a facility known as hard links (referred to herein as Hardlinks). Hardlinks provide the ability to keep a single copy of a file yet have it appear in multiple folders (directories). They can be created with the POSIX command ln included in the Windows Resource Kit, the fsutil command utility included in Windows XP or my command line ln.exe utility Thus, using standard Windows facilities Hardlinks can only be created at the command prompt, which can be tedious, especially when Hardlinks to multiple files are required or when one only makes occasional use of Hardlinks. Support for Junctions in standard Microsoft software offerings is even more limited than that offered for Hardlinks. Link Shell Extension (LSE) provides for the creation of Hardlinks , Junctions , Volume Mountpoints , and Windows7/8's Symbolic Links, (herein referred to collectively as Links) a folder cloning process that utilises Hardlinks or Symbolic Links and a copy process taking care of Junctions, Symbolic Links, and Hardlinks. LSE, as its name implies is implemented as a Shell extension and is accessed from Windows Explorer, or similar file/folder managers. The extension allows the user to select one or many files or folders, then using the mouse, complete the creation of the required Links - Hardlinks, Junctions or Symbolic Links or in the case of folders to create Clones consisting of Hard or Symbolic Links. LSE is supported on all Windows versions that support NTFS version 5.0 or later, including Windows XP64 and Windows7/8/10. Hardlinks, Junctions and Symbolic Links are NOT supported on FAT file systems, and nor is the Cloning and Smart Copy process supported on FAT file systems. Within this document ... |
|
4,513 | Aug 09, 2018 Hermann Schinagl  |
|
Hardlink Shell Extension 64bit 3.8.6.8 Hardlink Shell Extension 64bit 3.8.6.8 The NTFS file system implemented in NT4, Windows 2000, Windows XP, Windows XP64, and Windows7/8/10 supports a facility known as hard links (referred to herein as Hardlinks). Hardlinks provide the ability to keep a single copy of a file yet have it appear in multiple folders (directories). They can be created with the POSIX command ln included in the Windows Resource Kit, the fsutil command utility included in Windows XP or my command line ln.exe utility Thus, using standard Windows facilities Hardlinks can only be created at the command prompt, which can be tedious, especially when Hardlinks to multiple files are required or when one only makes occasional use of Hardlinks. Support for Junctions in standard Microsoft software offerings is even more limited than that offered for Hardlinks. Link Shell Extension (LSE) provides for the creation of Hardlinks , Junctions , Volume Mountpoints , and Windows7/8's Symbolic Links, (herein referred to collectively as Links) a folder cloning process that utilises Hardlinks or Symbolic Links and a copy process taking care of Junctions, Symbolic Links, and Hardlinks. LSE, as its name implies is implemented as a Shell extension and is accessed from Windows Explorer, or similar file/folder managers. The extension allows the user to select one or many files or folders, then using the mouse, complete the creation of the required Links - Hardlinks, Junctions or Symbolic Links or in the case of folders to create Clones consisting of Hard or Symbolic Links. LSE is supported on all Windows versions that support NTFS version 5.0 or later, including Windows XP64 and Windows7/8/10. Hardlinks, Junctions and Symbolic Links are NOT supported on FAT file systems, and nor is the Cloning and Smart Copy process supported on FAT file systems. Within this document ... |
|
4,547 | Aug 09, 2018 Hermann Schinagl |
|
Hosts File Editor+ v.1.5.8 Hosts File Editor+ v.1.5.8 The program allows editing hosts file. Requirements: Microsoft .NET Framework 4.0 Client Profile ------------------------------------------------ SUPPORTED OPERATING SYSTEMS (x32, x64): ------------------------------------------------ Microsoft Windows XP SP2 or SP3 ; Microsoft Windows Server 2003 Microsoft Windows Vista ; Microsoft Windows Server 2008 Microsoft Windows 7 ; Microsoft Windows Server 2008 R2 Microsoft Windows 8 ; Microsoft Windows Server 2012 Microsoft Windows 8.1 ; Microsoft Windows 8.1 With update Microsoft Windows Server 2012 R2 ; Microsoft Windows 10 ; Microsoft Windows Server 2016 The program is free. No need to install, just run the application. Additional Tools of this program: ---------------------------------------------- - | Windows Additional Tools | - (for users Windows 7, as and newer Windows OS): - (Enable / Disable Windows Update). - (Clean Windows Update History...). - (Enable / Disable Windows Firewall). - (Create Rules in Windows Firewall...). - (Enable / Disable Windows Defender...). - (Enable / Disable Hibernate...). - (Enable / Disable Windows Security Center...). - (Enable / Disable UAC). - (Temp File Cleaner (Clean: C:/Windows/Temp; C:/User/UserName/AppData/Local/Temp; C:/Windows/Prefetch and Recent items). - (Delete System Restore points). - (Block run certain Applications). The basic functions of this program: ------------------------------------------------ - Set DNS Servers (Tools/ Set DNS Servers). - Set Proxy settings (Tools/ Proxy Setings). - Change Network MAC Address - ... |
|
1,164 | Mar 24, 2019 Nebojša Vučinić - Trebinje  |
|
HostsCK 2.1.8.0 HostsCK 2.1.8.0 HostsCK is the free, easy, comprehensive way to maintain the Windows Hosts file. By maintaining the Windows Hosts file you can block many annoying ads, banners and cookies as well as complete websites, potentially speeding up your web-browsing and keeping you safer online without the need to add yet more plugins to your web browser. And unlike browser plugins a Hosts file can protect your computer even when you are not browsing by blocking programs from connecting to their home site. Main features Easy to read the Hosts file. HostsCKIt makes the Hosts file easier to read by using different font colours for the comments in a Hosts file and the addresses being blocked or allowed. You can use any colour combination you want. You can also easily remove any or all comments. Easy to update the Hosts file. HostsCK BrowserOne click on the toolbar opens the built in browser which can take you to mvps.org or any other website that provides a Hosts blocked list making it easy to download and update the Hosts file. There are options to backup your Hosts before saving, remove comments or change any prefix of 0.0.0.0 to 127.0.0.1 or vice versa. Save your own blocked or allowed sites. Saved sites viewerSave your own sites which will be imported back into the Hosts file when you have update it. You can save addresses to a whitelist. HostsCK will make sure those addresses are not blocked when saving a Hosts. HostsCK also makes it simple to backup or disable the Hosts file, you can revert back to the original Microsoft file if required. It can lock the Hosts file which will prevent other programs deleting or modifying it and you can easily import your own lists. Best of all, HostsCK is free. There are no limitations, no locked features and no ads….EVER! If you are using Windows 8 or 10 you may have to add a file exception for the Hosts file in Windows Defender. Step-by-step ... |
|
573 | Sep 02, 2018 rediSoft  |
|
hostsmgr v1.2 hostsmgr v1.2 Console tool for sysadmins and other peoples who need to autoupdate "hosts" file. Command line /ip - destination ip address to be set as resolve for all domains (default: 0.0.0.0) /path - destination hosts file location; environment variables and relative paths are supported (default: readed from Windows registry) /os - new line used in "hosts" file; "win" for Windows (crlf), "linux" - for Linux (lf), "mac" for Mac OS (cr) GPG Signature Binaries have GPG signature hostsmgr.sig in application folder. Public key: pubkey.asc (ha.pool.sks-keyservers.net) Key ID: 0x5635B5FD Fingerprint: D985 2361 1524 AB29 BE73 30AC 2881 20A7 5635 B5FD v1.2 (7 November 2018) added backup original hosts file before replacing (use /nobackup to skip) added print help for start without arguments added program icon increased speed Click here to visit the author's website. |
|
288 | Dec 06, 2018 Henry++  |
|
NetHotfixScanner 1.5 NetHotfixScanner 1.5 Network Hotfix Scanner is a free advanced hotfix check utility that scans network computers for missing hotfixes and patches, and helps you download and install them. NetHotfixScanner gives you a quick look at the hotfixes and patches installed or missed on any remote computer in your corporate network, it tells you by colored icons specific security bulletin rating ( critical, important, moderate ), title, description and bulletin URL. The tool is designed with a user-friendly interface and is easy to use. |
|
4,776 | Aug 09, 2018 Nsasoft LLC  |
|
Policy Plus 1.0.0.0 (updated) Policy Plus 1.0.0.0 (updated) Local Group Policy Editor plus more, for all Windows editions. Goals Policy Plus is intended to make the power of Group Policy settings available to everyone. Run and work on all Windows editions, not just Pro and Enterprise Comply fully with licensing (i.e. transplant no components across Windows installations) View and edit Registry-based policies in local GPOs, per-user GPOs, individual POL files, offline Registry user hives, and the live Registry Navigate to policies by ID, text, or affected Registry entries Show additional technical information about objects (policies, categories, products) Provide convenient ways to share and import policy settings Non-Registry-based policies (i.e. items outside the Administrative Templates branch of the Group Policy Editor) currently have no priority, but they may be reconsidered at a later date. Quick intro At startup, Policy Plus opens the last saved policy source, or the local Group Policy Object (Local GPO) by default. To open a different policy source (like a Registry branch or a per-user GPO), use File | Open Policy Resources. Much like the official Group Policy editor, categories are shown in the left tree. Information on the selected object is shown in the middle. Policies and subcategories in the selected category are shown in the right list. By default, both user and computer policies are displayed, but you can focus on just one policy source using the drop-down in the upper left. To edit a policy, double-click it. If the selected setting applies to both users and computers, you can switch sections with the "Editing for" drop-down. Click OK to keep the changes to the setting. Notice: If a policy source is backed by a POL file (like Local GPO), changes to it will not be committed to ... |
|
1,325 | Feb 20, 2019 Ben Nordick  |
|
Portecle 1.10 Portecle 1.10 Portecle is a user friendly GUI application for creating, managing and examining keystores, keys, certificates, certificate requests, certificate revocation lists and more. Features Currently, Portecle can be used to, for example: Create, load, save, and convert keystores. Generate DSA and RSA key pair entries with self-signed version 1 X.509 certificates. Import X.509 certificate files as trusted certificates. Import key pairs from PKCS #12 and PEM bundle files. Clone and change the password of key pair entries and keystores. View the details of certificates contained within keystore entries, certificate files, and SSL/TLS connections. Export keystore entries in a variety of formats. Generate and view certification requests (CSRs). Import Certificate Authority (CA) replies. Change the password of key pair entries and keystores. Delete, clone, and rename keystore entries. View the details of certificate revocation list (CRL) files. Keystore files can be created, opened and saved via the File menu. The contents of Certificate and CRL files can be examined through use of the options on the Examine menu. General keystore maintenance operations are accessible through the Tools menu. These general operations include the capability to examine the content of certificate files, to import trusted certificates, to generate key pairs and change keystore type. Most of the operations found in the File, Examine and Tools menus are also available on the tool bar. Most operations also have shortcut keys. The entries contained within a loaded keystore are displayed in the keystore entry table which has columns for: An entry's type (Key Key entry icon, Key Pair Key pair entry icon or Trusted Certificate Trusted certificate entry icon). ... |
|
1,197 | Aug 09, 2018 Wayne Grant  |
|
Rapid Environment Editor 9.1 build 936 Rapid Environment Editor 9.1 build 936 Rapid Environment Editor (RapidEE) is an environment variables editor. It includes easy to use GUI and replaces small and inconvenient Windows edit box. Features: Editable tree Show environment variables and values as an editable tree. Portable mode RapidEE doesn't require installation and could be run as a "portable application". View details. Error checking Automatically checking for invalid pathnames and filenames Multilanguage interface RapidEE is translated into number of languages (English, Russian, Japanese, French, Polish, German, Italian, Latvian, Slovak, Greek, Spanish, Chinese, Dutch, Swedish, Korean), and the language can be changed on the fly. Variable inspector Inspector shows miscellaneous information about variables: name, type, value, short file name in the 8.3 naming convention for each long file name and vice versa. No typing You don't need to type long pathnames. Just choose path using File Explorer tree Easy values manipulation RapidEE supports drag'n'drop for reordering of variable values Backup Environment variables can be backed up to the registry file (.reg) Skins Skins allow you to change the look and feel of RapidEE Multiuser support If you have an administrative privileges then you can edit environment variables for any user on your computer. Changelog fixed: Polish translation (Przemyslaw P. Socha) |
|
4,740 | Aug 09, 2018 Oleg Danilov  |
|
Reboot Restore Rx Free 2.2 Reboot Restore Rx Free 2.2 Reboot Restore Rx prevents any changes made on your drive(s) by restoring a saved baseline every time the PC boots up. It is designed for small public access computing environments such as classrooms, libraries, kiosks, and internet cafes. Even when users download files, viruses, malware, or even try to delete registry keys, Reboot Restore Rx will restore the PC back to your desired state. Reboot on Restore Instantly reset to the baseline on startup or hard reset. One-Click Instant Update Update the baseline without restarting your computer. Reduce Maintenance Cost Drastically reduces computer maintenance, and can be used to protect tier one public access computing environments Reboot Restore Rx Version: 2.2 Last Updated: 10 May 2017 Fixes Secure Boot Issue for better compatibility with Windows 10 build 1607 & later Support Grub Linux bootloader. Adjusted the Uninstallation User Interface. New End User License Agreement (EULA) |
|
1,117 | Aug 09, 2018 Horizon DataSys Corp.  |
|
Remote Process Viewer v1.3.0.20 Remote Process Viewer v1.3.0.20 Remote Process Viewer is a free remote Windows Task Manager for your network. It displays all processes currently running on a chosen network client. This remote process explorer shows detailed information for all running processes on the remote computer and reveals information such as the process file name, full path, PID (process identifier), RAM, CPU time, Handles, PID of the parent process, user session ID, number of threads and process priority. There is absolutely no installation required. Simply download and run the software. Select a client you want to analyze. Now you see all processes on the remote computer. Remote Process Viewer uses the WMI service built into Windows. This means it does not require any additional software installation on the computers that you are connecting to (agentless monitoring). Features doesn't require installation doesn't require a client agent doesn't write to the registry doesn't modify files outside of its own folder doesn't require runtime libraries isn't adware/spyware 100% free - just remember it comes from file.net :-) System requirements Windows 10, 8, 7, Vista, XP or Windows Server only 0.5 MB free disk space Click here to visit the author's website. |
|
974 | Jan 05, 2019 Neuber GmbH  |
|
Restart on Crash v1.6 Restart on Crash v1.6 Restart on Crash is an monitoring tool that will watch the applications that you specify and automatically relaunch any program that hangs or crashes. You can add any number of applications to monitor, enable/disable them individually and edit the command line that will be used to restart an application. Restart on Crash doesn’t require installation and stores all it’s configuration data in a “settings.ini” file in the program’s folder, so it’s portable. It should be compatible with most NT-based Windows versions. To add a new application to monitor, click the “Add” button or press the Ins key. To delete on or more applications from the list, select them and click “Delete” or press Del. To edit the per-application configuration, double-click the correspoding row. This will open the editing dialog (see below). You can also access the RoC configuration by clicking “Settings” and view the activity log by clicking “Show Log”. The log contains information about crashed/hanged applications, executed commands, and so on. Well, this one should be pretty self-explanatory 🙂 One detail to keep in mind is that enabling the “It isn’t running” option will make Restart On Crash treat the application as if it has crashed even if you have purposefully it closed it. You can get around this by disabling the monitoring of the application before you close it. “Grace period” is how long Restart on Crash will wait before trying to terminate/restart an application that it has just terminated/restarted. This is intended to prevent a scenario where RoC kills a hanged program, restarts it, decides it has hanged again (e.g. if the program is non-responsive while starting up) and wrongfully terminates it again. Known Issues If you configure RoC to automatically kill ... |
|
281 | Dec 16, 2018 W-Shadow.com  |
|
Run as Service 1.0.0.0 Run as Service 1.0.0.0 RunAsService is a command line tool that allows you to setup a regular console application to run as a service. Below you will find descriptions and examples of how to do this. This tool requires that .NET Framework 2.0 be already installed on your computer. If you do not have .NET Framework 2.0 this tool will display a message and not run. You probably already have the .NET Framework 2.0 but if you don't you can download it here: Microsoft Download Center IMPORTANT: Any services you install using this tool will require that this tool remain on that computer in the same location in order for those services to continue functioning. Therefore before installing any services you should make sure this tool is somewhere where it can remain permanently. If you do end up moving this tool use the 'fixservices' action to fix the existing services. (details on how to use 'fixservices' can be found below) RunAsService Typing just the name of the tool without specifying any parameters. Or specifying incorrect paramters will bring you to the help screen. RunAsService install [Name] [Display Name] PathToExecutable Name The name of the service, if none is specified the name will default to the name of the executable. You might choose to give it a different name than the executable to keep some kind of existing convention, make it friendlier or make it easier to use commands like 'net start' and 'net stop' Display Name ... |
|
652 | Jun 22, 2018 Luis Perez  |
|
RunAsTool v1.4 RunAsTool v1.4 Windows’ built-in “Run As” command allows you to launch a program under a different user than the currently logged in user, However, runas.exe cannot be automated it requires that the user type in the password for the alternate account , RunAsTool is a Portable Freeware and Allows standard users run a specific program with administrator privileges without the need to enter the administrator password each time. This allows you to provide users with access to program that require admin rights. Under restircted Account , Some programs are missing administrator rights to run correctly , therefore Many users are working under administrator account , this makes the system vulnerable to malware, spyware, viruses and other security risks with RunAsTool you can change it. Since installation is not a requirement, you can just drop the program anywhere on the hard disk and run the executable file directly. Otherwise, you can save RunAsTool to a USB flash drive or similar storage unit, and run it on any computer. Therefore, you can carry the app with you whenever you’re on the move. The login information for the application like username and password are read from an encrypted file – You don’t have to worry about your Admin Password. How to use With RunAsTool You don’t have to use Cmd or any parameter to allow a standard user run a specific program with administrator rights , just download and extract RunAsTool 1) Administrators In standard user account: Run it and Choose a Admin Account (If there are more than one) and type your admin password There are two interface 1.Admin 2.Standart user (Standart users can not use Admin GUI) , in Admin GUI you can easily drag and drop any program/s to give it/them Administrator privileges ,Standart Users can create Application shortcuts too On RunAsTool there are some useful options for example ... |
|
2,039 | Oct 03, 2018 Sordum.org  |
|
SnakeTail 1.9.4 SnakeTail 1.9.4 SnakeTail is a Windows tail utility for monitoring growing text log files. Feature list: Monitor “large” text log files Monitor Windows Event Logs (Without needing administrator rights) Multiple Window Modes supported (MDI, Tabbed, Floating) Save and load entire window session. Can load session file at startup when given as command line parameter. Sentence highlight with colors based on keyword match (Includes regex support) Quickly jump between highlighted sentences using keyboard shortcuts Toggle bookmarks and quickly jump between bookmarks Configure external tools and bind custom shortcut key (Trigger execute on highlight) Tails circular logs where the log file is periodically truncated/renamed. Tails log directory where the latest log file is displayed (Includes wildcards) Search in the entire text log file (Or EventLog) Highlight window tabs using icons, when file changes are detected Tail new log files with a simple drag drop from Windows Explorer Filtering of Windows Event Logs using regular expressions Display simple process statistics in window title bar (RAM + CPU usage + TRX/Sec) Stop and start Windows service by right clicking in the tail window Change tail window background color Change tail window text color Change tail window icon Minimize to tray Low memory usage independent of log file size Low cpu usage even when more than 100 lines/sec Works well over remote desktop Supports Windows 2000, XP, 2003, Vista, Win2k8, Win7 ... |
|
1,579 | Aug 09, 2018 SnakeNest  |
|
Spiceworks IT Desktop 7.5.00095 Spiceworks IT Desktop 7.5.00095 The only application that combines Network Inventory, Help Desk and more in a single, easy-to-use interface. Your network may be complicated and expensive but your IT management tools don't need to be. Spiceworks IT Desktop is the only application that combines Network Inventory, Help Desk, Reporting, a built-in TFTP Server, Monitoring, Active Directory Management, and Troubleshooting in a single, easy-to-use interface designed for IT teams in small and medium businesses. Plus, Spiceworks lets you collaborate with IT pros around the world to solve problems, share ideas and decide what additional features you need in Spiceworks. And, the best part -- it's free. Why? Because we think you shouldn't have to pay for technology to manage technology. Instead, you should spend your money on cool new hardware and software for your company. That's why top technology vendors help sponsor Spiceworks. Manage your network. Need a way to wrangle all your devices, software, cloud services, and even users? With network inventory and mapping, network monitoring and alerting, license management, troubleshooting, reporting, and much more, Spiceworks is the free IT management app with the tools you need to tackle your IT day. Run an IT help desk. User requests driving you nuts? Your current ticketing solution not quite cutting it? Spiceworks help desk software helps you run a ship-shape help desk, at the office and on the road. Manage user tickets, organize your work, create a custom user portal, and even launch a knowledge base… all for free! Monitor your network. Ever feel like your users are a step ahead of you? Meet Spiceworks Network Monitor — an easy-to-use, real-time interface that'll help you stay in-the-know about what's happening with your critical systems and catch problems long before your users do. Inventory all your hardware. From workstations and servers to routers and switches (even printers and phones) – ... |
|
5,091 | Aug 09, 2018 Spiceworks  |
|
Terminal Wings 2.0 Terminal Wings 2.0 Give wings to your insipid Windows Terminal. Have you ever been dreaming about having a marvelous Microsoft Windows Terminal, something that's at the same time beautiful, time saving and better to organize when you need to work on several terminals at the same time. Don’t search furthermore: Terminal Wings is the application you were searching for. Already in its very first version it's very complete and powerful. Imagine what power you could harness in the near future. How does it work? Contrary to other applications which simply try to replicate the same efficiency of the embedded Windows Terminal coded by Microsoft, our Terminal Wings is not such an emulator which “Hooks” the process of a real terminal to 'copy/paste' the screen buffer and display its contents to the custom application frame. It also doesn't create virtual pipes to redirect output/input buffers (stdout ; stdin ; stderror) to capture send and capture terminal commands. The reason we don’t use both above methods is due to the instability of such methods. When you execute regular commands it works pretty fine, but when it comes to use more complex console programs it become quite unstable (depending of the emulator you use). So , what is our solution? Very basically, we do not emulate the Windows Terminal at all, but we use the real one. We Patch the window and associated messages and embed it into our own frame. Well, this might sound very easy, but in effect it is quite complex to code if you want to make it appear very smoothly. Important Notice: At this moment in time, the application is only available for Microsoft Windows 10. Depending on the initial success of this program, we might be tempted to support other Windows versions too. Current Functions Available Multi Tabs : Organise your terminals using ... |
|
1,019 | Aug 09, 2018 Phrozen Software  |
|
Tom’s AD Object Recovery 1.0.0.0 Tom’s AD Object Recovery 1.0.0.0 Tom’s AD Object Recovery is a free Windows utility for querying your Active Directory for deleted computer, user, group, or other objects and restore them on-the-fly. Have you accidentally removed a user or computer object from your Active Directory? Or, needed that Bitlocker Recovery Key for a deleted computer object? Whatever the reason is that you need to recover a deleted Active Directory object, restoring it does not have to be difficult. Tom’s AD Object Recovery provides an innovative user interface that allows you to quickly query all of your deleted Active Directory objects and restore/undelete/recover selected objects with the click of a button. If you have Microsoft’s Active Directory Recycle Bin enabled Tom’s AD Object Recovery will restore objects with all of its attributes intact. Features Restore deleted Active Directory objects fast and easy through innovative user interface Computer Objects User Objects Group Objects Organizational Units Print Queues Full Volume Encryption Objects (Bitlocker Recovery Keys) Restore AD objects with all attributes intact when Microsoft’s Recycle Bin feature is enabled No domain controller downtime Filtering and Highlighted Search Windows LogosLicense: Freeware (End User License Agreement) Requirements: Microsoft .NET Framework 4.5.2 |
|
1,171 | Aug 09, 2018 Tom Andreas Mannerud  |
|
Tom’s AD Password Extender 2.0.0.0 Tom’s AD Password Extender 2.0.0.0 Tom’s AD Password Extender is a free Windows utility that allows you to select a user account and extend the password expiration date by the amount of days specified in your Group Policy. This is often helpful when you have end-users who are travelling and can’t log into the VPN or other Active Directory authenticated system. By extending the expiration you ensure that accounts don’t get compromised from having to communicate the password across insecure channels. Have you ever gotten the call from the Road Warrior or frequent business traveler saying: “I am on the road and I can’t log into the VPN”? It is a common problem and happens frequently because end-users forget to change their passwords before they leave for that stressful trip. So, what do we do? In some cases we break security protocols by asking them for their password and set the password to be the same. In other cases we set a new password, but now the cached laptop password is different from their domain or VPN password causing confusion. In either case we might have compromised the account as others might have overheard the conversation. In some cases, we even say they are out of luck until they return to the office temporarily preventing them from working and as a result greatly reduces business productivity. This is where Tom’s AD Password Extender can help. Simply pull up their account using the intuitive user interface, highlight, and select Extend Password. Requirements: Microsoft .NET Framework 4.5.2 (MD5: DC5D6A9FA8D2874A67E1491BAACE830A ) |
|
950 | Aug 09, 2018 Tom Andreas Mannerud  |
|
Transwiz v1.11 Transwiz v1.11 Transwiz - User Profile Transfer Wizard - makes it easy to transfer your personal data and settings to a new computer. Transwiz Personal Edition is a standalone executable; it does not need to be installed or uninstalled. Download and run the msi file to extract the Transwiz.exe file. Simple. Powerful. Innovative Transwiz makes it easy to transfer your personal data and settings to a new computer: Simple Wizard interface for backing up and restoring user profiles Automatically converts XP user profiles to Windows 7, Windows 8 and Windows 10 Multi-language support Creates a standard zip archive Command-line interface to automate transfers Can back up directly to DVD and CD with automatic disk spanning Transfer from Windows XP/Vista/Windows 7/Windows 8 and Windows 10 Backup additional folder locations Automatically join a domain Freeware Edition Absolute Simplicity In developing Transwiz - User Profile Transfer Wizard - we want to create a method of transferring user profile data and settings between computers that is as simple as it is powerful. Transwiz will pack your existing personal data and settings into a standard zip archive for easy transfer to another computer. The Wizard will then unpack the archive on the new computer and restore your user profile - automatically reconfiguring the profile as necessary for the new Operating System. The Wizard will also rename the new computer and join it to your domain as required. Transwiz can transfer profile data from Windows XP, Vista, Windows 7, Windows 8 and Windows 10, and to machines running Windows XP, Windows 7, Windows 8, and Windows 10. You can use the same archive file to transfer your user profile to and from ... |
|
239 | Jan 09, 2019 ForensiT Ltd.  |
|
USB Ports Disabler v1.0 USB Ports Disabler v1.0 USB Ports Disabler is a simple Windows OS software useful to disable all USB drives to prevent data theft and malware which spread through USB devices. Easily lock or unlock USB ports, restrict users from using USB drives in your computer, disable USB drive detection on your Windows system. This program works by disabling the USBSTOR service so Windows is unable to detect and identify USB devices connected to the computer. USB Ports Disabler works on Microsoft Windows XP, Vista, 7, 8, 10 (32\64-bit). |
|
1,710 | Aug 09, 2018 Site2unblock  |
|
User Profile Wizard 3.14 User Profile Wizard 3.14 User Profile Wizard 3.14 is the latest version of ForensiT's powerful workstation migration tool. User Profile Wizard will migrate your current user profile to your new domain account so that you can keep all your existing data and settings. User Profile Wizard Personal Edition is a standalone executable; it does not need to be installed or uninstalled. Download and run the msi file to extract the Profwiz.exe file. Click here to visit the author's website. |
|
311 | Jan 09, 2019 ForensiT Ltd.  |
|
WHDownloader 0.2.2 WHDownloader 0.2.2 A lightweight and easy to use downloader which allows you to find and apply the latest Microsoft Windows/Office updates. Features Download Windows Updates Download Office Updates Update Lists Providers/Maintainers: abbodi1406 (Windows 7, Windows 8.1, Windows 10, Office 2010/16) burfadel (Office 2013) |
|
4,490 | Aug 09, 2018 Alphawaves  |
 |
Windows Commands Reference vWS16 Windows Commands Reference vWS16 A PDF containing an overview and alphabetical listing of Windows commands. Use this PDF to find the documentation resources and other technical information that you need to learn about the command shell, and to automate command-line tasks by using scripts or scripting tools. Windows Server 2008, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016 Date Published: 4/18/2018 Click here to visit the author's website. |
|
229 | Jan 30, 2019 Microsoft Corp.  |
|
WinLogOnView v1.32 WinLogOnView v1.32 WinLogOnView is a simple tool for Windows Vista/7/8/2008 that analyses the security event log of Windows operating system, and detects the date/time that users logged on and logged off. For every time that a user log on/log off to your system, the following information is displayed: Logon ID, User Name, Domain, Computer, Logon Time, Logoff Time, Duration, and network address. WinLogOnView also allows you to easily export the logon sessions information to tab-delimited/comma-delimited/html/xml file. System Requirements This utility works on Windows Vista/7/8/2008/10. Both 32-bit and 64-bit systems are supported. Older systems are not supported because the log on/log off information is not added to the security event log. Known Limitations This tool is based on the security event log of Windows, and the accuracy of the displayed information depends on the availability and accuracy of the data stored inside the security event log. It's possible that some of the information will be missing, like a logon session without logoff time. Bw aware that WinLogOnView currently uses the following events: 4648, 4624, 4647. Versions History Version 1.32: The loading process is now faster when using the 'Use New Event Log API' option. Start Using WinLogOnView WinLogOnView doesn't require any installation process or additional dll files. In order to start using it, simply run the executable file - WinLogOnView.exe After running it, the main window of WinLogOnView displays the list of all logon sessions detected on your system. You can easily export the list to html/xml/tab-delimited/comma-delimited file by using the 'Save Selected Items' option. You can also copy the selected items to the clipboard (Ctrl+C) and then paste them into Excel with Ctrl+V. If you want to get the logon/logoff information of a remote computer on your network, simply go to the ... |
|
4,707 | Dec 11, 2018 Nir Sofer  |
|
Yet Another (remote) Process Monitor 2.4.2 Yet Another (remote) Process Monitor 2.4.2 The main purpose of YAPM is to display all informations availables about processes running on a local or remote system, and to update all these informations in real time. The application has four principal windows : the main window : displays the list of opened tasks/processes/jobs/services/TCP-UDP-connections in real time the process detail window : displays in real time all informations about a specific process. Double-click on a process to open this window the service detail window : displays in real time all informations about a specific service. Double-click on a service to open this window the job detail window : displays in real time all informations about a specific job. Double-click on a job to open this window For all lists, it is possible to choose the columns to display. Lots of informations and functions are available, here are the main : Processes YAPM is able to kill (simple kill, kill process tree, kill by 6 different methods), stop, resume, set priority, set affinity of processes (multiple selection), add processes to job, create dump file, reduce WS size...etc. . You can also choose the informations you want to display (more than 50 available). The processes are highlighted depending of their type (system processes, processes in job...). Colors are of course configurable. Services YAPM can shutdown, stop, resume, pause, delete, create and change start type of all services. Changelog CHANGES FROM 2.4.0 * NEW / Improvements - Added massive signature check feature - Now 'Dump memory' feature is implemented and works fine - Now can create snapshot file from command line (-ssfile "FILE_PATH") - Optimized Service enumeration - Added LoadCount information for modules - Added 'Free memory' button (this calls the .Net GC) - x64 systems : added "IsWow64" information (and displays "* 32") - x64 systems : now ... |
|
1,006 | Aug 09, 2018 violent_ken  |
| Showing rows 1 to 34 of 34 | Showing Page 1 of 1 | 1 |
Copyright (c) 2019
