Processed through Paypal
No account required.


Donate Bitcoin to this wallet:
1KkUMXvQ2ko3xcJkzitB7WYgoW6m79WFfm
Donate Ethereum to this wallet:
0x40E56922F43637224935CDC35e2c96E0392A8505
Donate Litecoin to this wallet:
LLYAFEyqjH69gkyCEpRjXNyedRCWrVChfL
Facebook Follow @GeekOnTheLoose


CLICK HERE TO SEARCH

 Home » OlderGeeks.com Freeware Downloads » Searching Files   
Search
Search Terms
Search Category Leave category selection blank to search within all categories.
Search Results
Files
  File Name Rating Downloads
Last Update/Developer
NetStumbler 0.4.0
NetStumbler 0.4.0 NetStumbler is a tool for Windows that allows you to detect Wireless Local Area Networks (WLANs) using 802.11b, 802.11a and 802.11g. It has many uses: Verify that your network is set up the way you intended. Find locations with poor coverage in your WLAN. Detect other networks that might be causing interference with your network. Detect unauthorized "rogue" access points in your workplace. Help aim directional antennas for long-haul WLAN links. Use it recreationally for WarDriving. Requirements General Requirements The requirements for NetStumbler are somewhat complex and depend on hardware, firmware versions, driver versions and operating system. The best way to see if it works on your system is to try it. Some configurations have been extensively tested and are known to work. These are detailed at http://www.stumbler.net/compat. If your configuration works but is not listed, or is listed but does not work, please follow the instructions on the web site. The following are rules of thumb that you can follow in case you cannot reach the web site for some reason. This version of NetStumbler requires Windows 2000, Windows XP, or better. The Proxim models 8410-WD and 8420-WD are known to work. The 8410-WD has also been sold as the Dell TrueMobile 1150, Compaq WL110, Avaya Wireless 802.11b PC Card, and others. Most cards based on the Intersil Prism/Prism2 chip set also work. Most 802.11b, 802.11a and 802.11g wireless LAN adapters should work on Windows XP. Some may work on Windows 2000 too. Many of them report inaccurate Signal strength, and if using the "NDIS 5.1" card access method then Noise level will not be reported. This includes cards based on Atheros, Atmel, Broadcom, Cisco and Centrino chip sets. I cannot help you figure out what chip set is in any given card. Firmware Requirements If you have an old WaveLAN/IEEE card then please note that ...
5/5 562 Jan 11, 2018
Marius Milner <img src="http://www.oldergeeks.com/downloads/gallery/thumbs/NetStumbler1_th.png"border="0">
OpenSCAD 2015.03-2 for Windows
OpenSCAD 2015.03-2 for Windows The Programmers Solid 3D CAD Modeller. OpenSCAD is software for creating solid 3D CAD models. It is free software and available for Linux/UNIX, Windows and Mac OS X. Unlike most free software for creating 3D models (such as Blender) it does not focus on the artistic aspects of 3D modelling but instead on the CAD aspects. Thus it might be the application you are looking for when you are planning to create 3D models of machine parts but pretty sure is not what you are looking for when you are more interested in creating computer-animated movies. OpenSCAD is not an interactive modeller. Instead it is something like a 3D-compiler that reads in a script file that describes the object and renders the 3D model from this script file. This gives you (the designer) full control over the modelling process and enables you to easily change any step in the modelling process or make designs that are defined by configurable parameters. OpenSCAD provides two main modelling techniques: First there is constructive solid geometry (aka CSG) and second there is extrusion of 2D outlines. As data exchange format format for this 2D outlines Autocad DXF files are used. In addition to 2D paths for extrusion it is also possible to read design parameters from DXF files. Besides DXF files OpenSCAD can read and create 3D models in the STL and OFF file formats. Contact OpenSCAD is maintained by Marius Kintel General inquiries can be sent to info@openscad.org License OpenSCAD is Free Software released under the General Public License version 2. Underlying Technology OpenSCAD builds on top of a number of free software libraries; is uses Qt for user interface, CGAL for CSG evaluation, OpenCSG and OpenGL for CSG previews, as well as boost, eigen and glew. Related Projects A number of projects were inspired by OpenSCAD, or in some other ...
5/5 556 Nov 17, 2017
Marius Kintel <img src="http://www.oldergeeks.com/downloads/gallery/thumbs/OpenSCAD1_th.png"border="0">
OpenSCAD 2015.03-3 for Mac
OpenSCAD 2015.03-3 for Mac The Programmers Solid 3D CAD Modeller. OpenSCAD is software for creating solid 3D CAD models. It is free software and available for Linux/UNIX, Windows and Mac OS X. Unlike most free software for creating 3D models (such as Blender) it does not focus on the artistic aspects of 3D modelling but instead on the CAD aspects. Thus it might be the application you are looking for when you are planning to create 3D models of machine parts but pretty sure is not what you are looking for when you are more interested in creating computer-animated movies. OpenSCAD is not an interactive modeller. Instead it is something like a 3D-compiler that reads in a script file that describes the object and renders the 3D model from this script file. This gives you (the designer) full control over the modelling process and enables you to easily change any step in the modelling process or make designs that are defined by configurable parameters. OpenSCAD provides two main modelling techniques: First there is constructive solid geometry (aka CSG) and second there is extrusion of 2D outlines. As data exchange format format for this 2D outlines Autocad DXF files are used. In addition to 2D paths for extrusion it is also possible to read design parameters from DXF files. Besides DXF files OpenSCAD can read and create 3D models in the STL and OFF file formats. Contact OpenSCAD is maintained by Marius Kintel General inquiries can be sent to info@openscad.org License OpenSCAD is Free Software released under the General Public License version 2. Underlying Technology OpenSCAD builds on top of a number of free software libraries; is uses Qt for user interface, CGAL for CSG evaluation, OpenCSG and OpenGL for CSG previews, as well as boost, eigen and glew. Related Projects A number of projects were inspired by OpenSCAD, or in some other ...
5/5 534 Nov 17, 2017
Marius Kintel <img src="http://www.oldergeeks.com/downloads/gallery/thumbs/OpenSCAD1_th.png"border="0">
   
Showing rows 1 to 3 of 3 Showing Page 1 of 1  1 


PHCDownload 1.1.2 - Copyright (c) 2005 - 2018 - 0.0252 seconds


Tweets by @GeekOnTheLoose