|
Your download link is at the very bottom of the page... always. |
Processed through Paypal No account required. Donate Bitcoin to this wallet: 1KkUMXvQ2ko3xcJkzitB7WYgoW6m79WFfm Donate Ethereum to this wallet: 0x40E56922F43637224935CDC35e2c96E0392A8505 Donate Litecoin to this wallet: LLYAFEyqjH69gkyCEpRjXNyedRCWrVChfL |
| Files | ||||
| File Name | Rating | Downloads | ||
 |
SNRemove v1.00 SNRemove v1.00 When a dll or exe file is signed with strong name keys, .NET doesn't allow you to modify it. If you try to use a signed assembly, after you have made some changes with Hex editor or any other tool, you'll get the following exception: An unhandled exception of type 'System.IO.FileLoadException' occurred in system.windows.forms.dll Additional information: Strong name validation failed for assembly 'MyAssembly.Test'. If you try to run a signed executable file after you have made some changes in it, you'll get the following error message: String name validation failed for assembly... The file may have been tampered with or it was partially signed but not fully signed with the correct private key. This utility removes the reference to strong name signature from .NET exe and dll files. After removing the strong name reference, you can make any change you want in dll/exe file, without getting any exception or error message. However, be aware that assemblies with no strong name reference cannot be added into the Global Assembly Cache (GAC). Using SNRemove Using SNRemove is very simple - just extract the snremove.exe to any folder you like, and run it from Command Prompt with the desired command-line parameters. SNRemove Usage SNRemove [options] <filename> Options: -r Remove the reference to Strong Name signature from the specified file. -d Display the Strong Name signature of the specified file. The <filename> parameter may also contain wildcards. Examples: SNRemove -r c:\myfiles\dll1.dll SNRemove -d "c:\my files\*.dll" System Requirements Although this utility is designed to work with exe and dll files created for .NET environment, the utility by itself wasn't written in .NET, which means that it can work in all versions of Windows, even if .NET Framework is not installed. License This utility is released as freeware. You are allowed to freely distribute this utility via floppy disk, CD-ROM, Internet, or in any other way, as long as you ... |
 |
8,634 | Jul 09, 2019 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/snexception_th.png"border="0"> |
|
SocketSniff v1.00 SocketSniff allows you to watch the Windows Sockets (WinSock) activity of the selected process. For each created socket, the following information is displayed: socket handle, socket type, local and remote addresses, local and remote ports, total number of send/receive bytes, and more. You can also watch the content of each send or receive call, in Ascii mode or as Hex Dump. |
|
8,468 | Nov 12, 2008 Copyright (c) 2008 Nir Sofer |
 |
Sonic.EXE - The Game 7.0.0 Sonic.EXE - The Game 7.0.0 A scary, dark, twisted Sonic game. Sonic.EXE is based on the Creepypasta "Sonic.EXE" created by Mr. JC Hyena. The Official Sonic.EXE Game Sonic.EXE Version 7 is finally here! This update brings a variety of graphical improvements, audio improvements, no less a few 'not-so-little' updates to the game world. To top it off, there are a number of performance optimisations made to the game's engine to help the gameplay experience feel that little bit smoother. Some old secrets still lurk, but may appear different in form - and some? May have even been replaced by new, sinister worlds where the influence of 'X' has spread. Explore, and don't think for a second that the path you've taken will remain the same - turn back, keep your eyes peeled for changes. You may be rewarded for your efforts. Well... "reward" might not be the word for it.~ The game took about 3 days to whip up, and is not a full representation of my programming ability - it was simply something I made for a laugh. I never expected it to come this far since the original release. Bear that in mind. Some Antivirus software may report this program - rest assured, this is a false positive. Credits: Sonic.EXE is based on the Creepypasta "Sonic.EXE" created by Mr. JC Hyena "Hill Act 1.gym" - composed by Kyu. S "Kingdom of Sorrow" - composed by Namco "Gigyas Theme" - composed by Nintendo "Title Screen" - composed by Sega "This is Rupture Farms" - composed by Ellen Meijers-Gabriel & Josh Gabriel Introducing SheyGrell, as the Voice of Sonic.EXE Various Sound Effects - Doom, iD Software I Am God image Version 7 - created by Ian-EXE I am God image from Versions 1 - 6 created by compugecko532 Version 4 Title Screen created by SecretAgentJonathon Version 4 Game Over Key-press image created by shadowninja976 Version 4 Message background ... |
 |
5,426 | Jan 09, 2017 MY5TCrimson <img src="http://www.oldergeeks.com/downloads/gallery/thumbs/SonicEXE4_th.png"border="0"> |
|
SoundMax Integrated Digital Audio Driver v 5.12.01.4070 Rev. A This contains the SoundMax Integrated Digital Audio driver for the workstation models and operating systems listed. PURPOSE: Routine SOFTPAQ NUMBER: SP27792 SUPERSEDES: None EFFECTIVE DATE: June 14, 2004 CATEGORY: Driver - Audio SSM SUPPORTED: Yes PRODUCT TYPE(S): Workstations PRODUCT MODEL(S): HP Workstation xw4200: HP Workstation ALL DEVICES SUPPORTED: HP/SoundMAX Integrated Digital Audio PREREQUISITES: System chipset driver must be installed prior to installing this audio driver. |
|
8,544 | Dec 11, 2008 SoundMax |
|
SoundVolumeView v2.26 SoundVolumeView v2.26 A simple tool for Windows Vista/7/8/2008/10 that displays general information and current volume level for all active sound components on your system, and allows you to mute and unmute them instantly. SoundVolumeView also allows you to save a sound profile into a file, containing the current volume level and the mute/unmute state of all sound components, as well as the default sound devices, and then later, load the same file to restore exactly the same volume levels and settings. There is also extensive command-line support, which allows you to save/load profiles, change current volume of every sound component, and mute/unmute every sound component, without displaying any user interface. System Requirements This utility works on Windows Vista, Windows 7, Windows 8, Windows 2008, and Windows 10. Both 32-bit and 64-bit systems are supported. Windows XP and older systems are not supported. Versions History Version 2.26: You can now use any variable inside the .cfg file (SoundVolumeView.cfg) in order to set the configuration from command line, for example: SoundVolumeView.exe /SaveFileEncoding 3 /ShowUnpluggedDevices 1 /ShowDisabledDevices 1 Start Using SoundVolumeView SoundVolumeView doesn't require any installation process or additional dll files. In order to start using it, simply run the executable file - SoundVolumeView.exe After running SoundVolumeView, the main window is displays all sound items found in your systems. There are 3 types of items: devices, subunits, and application volume. For every item, the current volume level is displayed in percent unit. For devices and subunits, the volume level is also displayed in Decibel. For subunits, the volume level is displayed for every channel separately. Increase/Decrease/Mute Volume In the main window of SoundVolumeView, you can select one or more items, and then mute, unmute, increase, or decrease the volume of selected items, using accelerator keys: Mute - F7 Unmute - F8 ... |
|
4,884 | Nov 26, 2021 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/soundvolumeview_th.png"border="0"> |
|
SpecialFoldersView v1.26 32bit SpecialFoldersView v1.26 32bit Windows operating system have dozens of special folders that are used for storing application settings and files, storing Internet files, saving temporary files, storing shortcuts to other files, and so on. This utility displays the list of all special folders in your system, and allows you to easily jump to the right folder simply by double-clicking the folder item. You can also save the list of all folder paths into text/html/xml file. System Requirements This utility works on Windows 2000, Windows XP, Windows Server 2003, Windows Server 2008, Windows Vista, Windows 7, Windows 8, and Windows 10. Both 32-bit and 64-bit systems are supported. Versions History Version 1.26: Added 'Copy Environment String Path'. Using SpecialFoldersView SpecialFoldersView doesn't require any installation process or additional DLL files. In order to start using it, simply run the executable file - SpecialFoldersView.exe The main window of SpecialFoldersView displays the list of all special folders in your system. In order to open the desired folder in Explorer, simply double-click the desired folder item. Special Folders List Sample In the following example, you can find the list of all special folders in typical installation of Windows XP with 'Administrator' user. This list was created by using SpecialFoldersView: Folder Name Folder Path CSIDL CSIDL Name Application Data C:\Documents and Settings\Administrator\Application Data 0x1a CSIDL_APPDATA CD Burning C:\Documents and Settings\Administrator\Local Settings\Application Data\Microsoft\CD Burning 0x3b CSIDL_CDBURN_AREA Common Administrative Tools C:\Documents and Settings\All Users\Start Menu\Programs\Administrative Tools 0x2f CSIDL_COMMON_ADMINTOOLS Common Application Data C:\Documents and Settings\All Users\Application Data 0x23 CSIDL_COMMON_APPDATA Common Desktop C:\Documents and Settings\All Users\Desktop 0x19 CSIDL_COMMON_DESKTOPDIRECTORY Common Documents C:\Documents and Settings\All Users\Documents 0x2e CSIDL_COMMON_DOCUMENTS Common Favorites C:\Documents and Settings\All Users\Favorites 0x1f CSIDL_COMMON_FAVORITES Common Music C:\Documents and Settings\All Users\Documents\My Music 0x35 CSIDL_COMMON_MUSIC Common Pictures C:\Documents and Settings\All Users\Documents\My Pictures 0x36 CSIDL_COMMON_PICTURES Common Start Menu C:\Documents and Settings\All Users\Start Menu 0x16 CSIDL_COMMON_STARTMENU Common Start Menu Programs C:\Documents and Settings\All Users\Start Menu\Programs 0x17 CSIDL_COMMON_PROGRAMS Common Startup C:\Documents and Settings\All Users\Start Menu\Programs\Startup 0x18 CSIDL_COMMON_STARTUP Common Templates C:\Documents and Settings\All Users\Templates 0x2d CSIDL_COMMON_TEMPLATES Common Video C:\Documents and Settings\All Users\Documents\My Videos 0x37 CSIDL_COMMON_VIDEO Cookies C:\Documents and Settings\Administrator\Cookies 0x21 CSIDL_COOKIES Desktop C:\Documents and Settings\Administrator\Desktop 0x10 CSIDL_DESKTOPDIRECTORY Favorites C:\Documents and Settings\Administrator\Favorites 0x06 CSIDL_FAVORITES Fonts C:\WINDOWS\Fonts 0x14 CSIDL_FONTS History C:\Documents and Settings\Administrator\Local Settings\History 0x22 CSIDL_HISTORY Local Application Data C:\Documents and Settings\Administrator\Local Settings\Application Data 0x1c CSIDL_LOCAL_APPDATA My ... |
|
8,565 | Jan 12, 2022 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/specialfoldersview_th.png"border="0"> |
|
SpecialFoldersView v1.26 64bit SpecialFoldersView v1.26 64bit Windows operating system have dozens of special folders that are used for storing application settings and files, storing Internet files, saving temporary files, storing shortcuts to other files, and so on. This utility displays the list of all special folders in your system, and allows you to easily jump to the right folder simply by double-clicking the folder item. You can also save the list of all folder paths into text/html/xml file. System Requirements This utility works on Windows 2000, Windows XP, Windows Server 2003, Windows Server 2008, Windows Vista, Windows 7, Windows 8, and Windows 10. Both 32-bit and 64-bit systems are supported. Versions History Version 1.26: Added 'Copy Environment String Path'. Using SpecialFoldersView SpecialFoldersView doesn't require any installation process or additional DLL files. In order to start using it, simply run the executable file - SpecialFoldersView.exe The main window of SpecialFoldersView displays the list of all special folders in your system. In order to open the desired folder in Explorer, simply double-click the desired folder item. Special Folders List Sample In the following example, you can find the list of all special folders in typical installation of Windows XP with 'Administrator' user. This list was created by using SpecialFoldersView: Folder Name Folder Path CSIDL CSIDL Name Application Data C:\Documents and Settings\Administrator\Application Data 0x1a CSIDL_APPDATA CD Burning C:\Documents and Settings\Administrator\Local Settings\Application Data\Microsoft\CD Burning 0x3b CSIDL_CDBURN_AREA Common Administrative Tools C:\Documents and Settings\All Users\Start Menu\Programs\Administrative Tools 0x2f CSIDL_COMMON_ADMINTOOLS Common Application Data C:\Documents and Settings\All Users\Application Data 0x23 CSIDL_COMMON_APPDATA Common Desktop C:\Documents and Settings\All Users\Desktop 0x19 CSIDL_COMMON_DESKTOPDIRECTORY Common Documents C:\Documents and Settings\All Users\Documents 0x2e CSIDL_COMMON_DOCUMENTS Common Favorites C:\Documents and Settings\All Users\Favorites 0x1f CSIDL_COMMON_FAVORITES Common Music C:\Documents and Settings\All Users\Documents\My Music 0x35 CSIDL_COMMON_MUSIC Common Pictures C:\Documents and Settings\All Users\Documents\My Pictures 0x36 CSIDL_COMMON_PICTURES Common Start Menu C:\Documents and Settings\All Users\Start Menu 0x16 CSIDL_COMMON_STARTMENU Common Start Menu Programs C:\Documents and Settings\All Users\Start Menu\Programs 0x17 CSIDL_COMMON_PROGRAMS Common Startup C:\Documents and Settings\All Users\Start Menu\Programs\Startup 0x18 CSIDL_COMMON_STARTUP Common Templates C:\Documents and Settings\All Users\Templates 0x2d CSIDL_COMMON_TEMPLATES Common Video C:\Documents and Settings\All Users\Documents\My Videos 0x37 CSIDL_COMMON_VIDEO Cookies C:\Documents and Settings\Administrator\Cookies 0x21 CSIDL_COOKIES Desktop C:\Documents and Settings\Administrator\Desktop 0x10 CSIDL_DESKTOPDIRECTORY Favorites C:\Documents and Settings\Administrator\Favorites 0x06 CSIDL_FAVORITES Fonts C:\WINDOWS\Fonts 0x14 CSIDL_FONTS History C:\Documents and Settings\Administrator\Local Settings\History 0x22 CSIDL_HISTORY Local Application Data C:\Documents and Settings\Administrator\Local Settings\Application Data 0x1c CSIDL_LOCAL_APPDATA My ... |
|
8,610 | Jan 12, 2022 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/specialfoldersview_th.png"border="0"> |
|
SysExporter v1.77 32bit SysExporter v1.77 32bit SysExporter utility allows you to grab the data stored in standard list-views, tree-views, list boxes, combo boxes, text-boxes, and WebBrowser/HTML controls from almost any application running on your system, and export it to text, HTML or XML file. Here's some examples for data that you can export with SysExporter: The files list inside archive file (.zip, .rar, and so on) as displayed by WinZip or 7-Zip File Manager. The files list inside a folder. The event log of Windows. The list of emails and contacts in Outlook Express. The Registry values displayed in the right pane of the Registry Editor. The data displayed by SysInternals utilities (Registry Monitor, File Monitor, Process Explorer, and others.) The text inside a standard message-box of Windows. The HTML inside any instance of Internet Explorer. Versions History Version 1.77: You can now send the data to stdout by specifying empty string as filename, for example: sysexp.exe /Title "Windows Task Manager" /class SysListView32 /Visible Yes /scomma "" | more System Requirement SysExporter Works perfectly on Windows NT, Windows 2000, Windows XP, Windows Server 2003, Windows Server 2008, Windows Vista, Windows 7, Windows 8, and Windows 10. On Windows 9x and Windows ME, SysExporter can only export data from combo boxes and list boxes controls, but not from list-view and tree-view controls. Known Limitations SysExporter can export data from most combo boxes, list boxes, tree-view, and list-view controls, but not from all of them. There are some applications that use these controls to display data, but the data itself is not actually stored in the control, but in ... |
|
3,518 | Sep 19, 2019 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/sysexp_th.png"border="0"> |
|
SysExporter v1.77 64bit SysExporter v1.77 64bit SysExporter utility allows you to grab the data stored in standard list-views, tree-views, list boxes, combo boxes, text-boxes, and WebBrowser/HTML controls from almost any application running on your system, and export it to text, HTML or XML file. Here's some examples for data that you can export with SysExporter: The files list inside archive file (.zip, .rar, and so on) as displayed by WinZip or 7-Zip File Manager. The files list inside a folder. The event log of Windows. The list of emails and contacts in Outlook Express. The Registry values displayed in the right pane of the Registry Editor. The data displayed by SysInternals utilities (Registry Monitor, File Monitor, Process Explorer, and others.) The text inside a standard message-box of Windows. The HTML inside any instance of Internet Explorer. Versions History Version 1.77: You can now send the data to stdout by specifying empty string as filename, for example: sysexp.exe /Title "Windows Task Manager" /class SysListView32 /Visible Yes /scomma "" | more System Requirement SysExporter Works perfectly on Windows NT, Windows 2000, Windows XP, Windows Server 2003, Windows Server 2008, Windows Vista, Windows 7, Windows 8, and Windows 10. On Windows 9x and Windows ME, SysExporter can only export data from combo boxes and list boxes controls, but not from list-view and tree-view controls. Known Limitations SysExporter can export data from most combo boxes, list boxes, tree-view, and list-view controls, but not from all of them. There are some applications that use these controls to display data, but the data itself is not actually stored in the control, but in ... |
|
3,536 | Sep 19, 2019 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/sysexp_th.png"border="0"> |
|
TCPConnectProblemView v1.05 TCPConnectProblemView v1.05 A free tool for Windows that monitors the TCP connections on your system and displays an alert when a software tries to initiate a TCP connection and there is no response from the server. When a problem with a TCP connection is detected , TCPConnectProblemView adds a new entry with the following information: Process Name, Process ID, Detected On (date/time), Local Port, Local IP, Remote Port, Remote IP, Remote Host. TCPConnectProblemView also allows you to automatically close any TCP socket with no response from the server, in order to decrease the time you wait for any software to display an error message (IPv4 only). System Requirements This tool works on any version of Windows, starting from Windows XP, and up to Windows 11. Both 32-bit and 64-bit systems are supported. Changes: v1.05: Added 'Always On Top' option. Start Using TCPConnectProblemView TCPConnectProblemView doesn't require any installation process or additional DLL files. In order to start using it, simply run the executable file - TCPConnectProblemView.exe After running TCPConnectProblemView, the main window displays the list of TCP conection problems when they are detected. In order to check if TCPConnectProblemView really works on your system, simply open your Web browser, type any inactive IP address on your LAN (For example: https://192.168.0.200 ), your Web browser will try to connect this address, and then short time after there is no response from the server, TCPConnectProblemView will display an alert about the problem. It's possible that you'll see multiple alerts because Web browsers usually try to connect multiple times before displaying failure error message. Tray Icon In order to put the TCPConnectProblemView tool on the tray icon, simple enable the 'Put Icon On Tray' option (Under the Options menu) and then close the main window. If you want to get an alert in a tray balloon when a TCP ... |
|
2,097 | Aug 04, 2022 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/tcpconnectproblemview1_th.png"border="0"> |
|
TcpLogView v1.41 TcpLogView v1.41 A simple, free utility that monitors the opened TCP connections on your system, and adds a new log line every time that a TCP connection is opened or closed. For every log line, the following information is displayed: Even Time, Event Type (Open, Close, Listen), Local Address, Remote Address, Remote Host Name, Local Port, Remote Port, Process ID, Process Name, and the country information of the Remote IP (Requires to download IP to country file separately.) System Requirements and Limitations This utility works on any version of Windows, starting from Windows 2000 and up to Windows 11. On 64-bit systems, you should use the x64 build of TcpLogView. This utility creates the TCP log by taking a snapshot of currently open TCP connections, and comparing it to the previous snapshot. This means that if a TCP connection is opened for a very short time, then TcpLogView will not be able to capture it. On Windows Vista/7/8 with UAC turned on, you should run TcpLogView as administrator if you want to get full process information. Changes: Version 1.41: Added 'CaptureInterval' value to the .cfg file. This value determines the number of milliseconds that TcpLogView waits before taking the next TCP connections snapshot. The default interval is 100 milliseconds (In previous versions it was 250 milliseconds). You can manually decrease this value if you want to capture TCP connections opened for very short time. Start Using TcpLogView TcpLogView doesn't require any installation process or additional dll files. In order to start using it, simply run the executable file - TcpLogView.exe After running TcpLogView, it starts logging the TCP connections, and adds a new line every time that TCP connection is opened or closed. You can clear the current log by using ... |
|
6,363 | Dec 20, 2023 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/tcplogview_th.png"border="0"> |
|
TimeZonesView v1.06 TimeZonesView v1.06 TimeZonesView is a simple tool for Windows that displays all world time zones. For every time zone, the following information is displayed: name, description, current date/time in this time zone and date/time that daylight saving time begins and ends. System Requirements This utility works on any versions of Windows, starting from Windows XP and up to Windows 10. Both 32-bit and 64-bit systems are supported. Be aware that in order to display accurate time information, the current time and time zone on your system must be correct (Including the settings of daylight saving time). Also, the time zone information is taken from the following Registry key: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Time Zones. So the information on this Registry key must be correct too. Versions History Version 1.06: Added 'DST Active' column (Yes or No). Start Using TimeZonesView TimeZonesView doesn't require any installation process or additional DLL files. In order to start using it, simply run the executable file - TimeZonesView.exe After running TimeZonesView, the main window will display the list of all time zones. Command-Line Options /stext <Filename> Save the time zones list into a simple text file. /stab <Filename> Save the time zones list into a tab-delimited text file. /scomma <Filename> Save the time zones list into a comma-delimited text file (csv). /stabular <Filename> Save the time zones list into a tabular text file. /shtml <Filename> Save the time zones list into HTML file (Horizontal). /sverhtml <Filename> Save the time zones list into HTML file (Vertical). /sxml <Filename> Save the time zones list into XML file. Translating TimeZonesView to other languages In order to translate TimeZonesView to other language, follow the instructions below: Run TimeZonesView with /savelangfile parameter: TimeZonesView.exe /savelangfile A file named TimeZonesView_lng.ini will be created in the folder of TimeZonesView utility. ... |
|
4,781 | Mar 08, 2019 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/timezonesview1_th.png"border="0"> |
|
TurnedOnTimesView v1.45 TurnedOnTimesView v1.45 TurnedOnTimesView is a simple tool that analyses the event log of Windows operating system, and detects the time ranges that your computer was turned on. For every period of time that the computer was turned on, the following information is displayed: Startup Time, Shutdown Time, Duration, Shutdown Reason, Shutdown Type, Shutdown Process, and Shutdown Code. TurnedOnTimesView allows you to get this information from your local computer, and from remote computer on your network if you have enough privilege to read the event log of Windows remotely. System Requirements This utility works on any version of Windows, starting from Windows 2000 and up to Windows 10. both 32-bit and 64-bit systems are supported. On Windows Vista/7/8, TurnedOnTimesView generally works without elevation (admin rights). However, in order to get information about system shutdown caused by a system crash (blue screen), you should right-click on TurnedOnTimesView.exe and choose 'Run As Administrator'. Known Limitations TurnedOnTimesView based on a few types of events on the event log of Windows to detect when the computer was turned off and on. It generally works quite well, but it's still possible that you'll get a false positive, which means that TurnedOnTimesView will show that the computer was turned off and on, even when the computer was not actually turned off. When the computer is turned off improperly (For example, on a power outage), TurnedOnTimesView will not be able to detect the shutdown time, and the icon of this item will be red instead of green. If you clear your system event log, TurnedOnTimesView will not be able to detect the shutdown/startup times. On systems prior to Windows Vista, Shutdown Reason, Shutdown Type, and Shutdown Process fields are usually ... |
|
4,869 | Jun 21, 2021 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/turnedontimesview1_th.png"border="0"> |
|
TurnFlash v1.00 (command-line version) Many Web sites today use the Macromedia Flash component for creating animated ads. These ads consumes additional bandwidth and sometimes even slow down your computer. Unfortunately, Internet Explorer doesn\'t provide a simple way to disable the Flash component. Furthermore, if you refuse to install the Flash component, Internet Explorer will constantly ask you to install Flash in each time that you enter into a Web page that contains a Flash object. This utility allows you to easily disable and enable the Flash component in Internet Explorer browser (Version 5.00 and above). When you disable Flash with this utility, all new windows in Internet Explorer will be opened without using the Flash component. The disabling of Flash doesn\'t affect the windows that are already opened. While the Flash Component is disabled, Internet Explorer will not ask you to download and install it. However, the disabling of the Flash component might cause a script error in some Web pages. Be aware that in Windows NT, 2000 and XP, this utility will not work if you don\'t have permission to write to the Registry keys of Internet Explorer. |
|
8,406 | Nov 24, 2008 Copyright (C) 2003 Nir Sofer |
|
TurnFlash v2.10 Many Web sites today use the Macromedia Flash component for creating animated ads. These ads consumes additional bandwidth and sometimes even slow down your computer. Unfortunately, Internet Explorer doesn\'t provide a simple way to disable the Flash component. Furthermore, if you refuse to install the Flash component, Internet Explorer will constantly ask you to install Flash in each time that you enter into a Web page that contains a Flash object. This utility allows you to easily disable and enable the Flash component in Internet Explorer browser (Version 5.00 and above). When you disable flash with this utility, all new windows in Internet Explorer will be opened without using the Flash component. The disabling of Flash doesn\'t affect the windows that are already opened. While the Flash Component is disabled, Internet Explorer will not ask you to download and install it. However, the disabling of the Flash component might cause a script error in some Web pages. Be aware that in Windows NT, 2000 and XP, this utility will not work if you don\'t have permission to write to the Registry keys of Internet Explorer. |
|
8,440 | Nov 24, 2008 Copyright (c) 2003 Nir Sofer |
|
UK's Kalender v2.5.4 UK's Kalender v2.5.4 "UK's Kalender" is a MS Windows program intended to remind you of upcoming events and todos. There are several views for your dates that are organized similar to a calendar sheet. Dates and appointments can be entered into the calendar via an input form.You can enter a forewarn time, so as long as "UK's Kalender" is running in the background you'll be reminded of your dates as soon as the forewarn time is reached. Independent from the calendar function there is also a todo list where you can enter tasks with a deadline and a forewarn time. If the forewarn time is reached, "UK's Kalender" will inform you of the due tasks with symbols and colors. Since version 2.0 of "UK's Kalender" it is possible to share a common event file between several computers in a network. A shared event can be entered, changed or deleted on one computer, all other computers will synchronize their event database. This shared event file runs in parallel to the local event file, so private event entries can still be entered as usual. The program was tested under the MS Windows versions 98SE, 2000, XP, 7, 8.1 and 10. 1.1 What "UK's Kalender" can do Automatic saving Any changes to the database are automatically and immediately saved to disk. On every program start, a backup copy of your data file is created. Unlimited Undo and Redo Most changes can be undone and also repeated. Minimize to the system tray "UK's Kalender" minimizes into the system tray (the area next to the system clock). Network support "UK's Kalender" supports a shared event file, where every user can enter events that'll show up ... |
|
4,447 | Nov 26, 2019 Ulrich Krebs <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/UKs Kalender_th.png"border="0"> |
|
UninstallView v1.50 UninstallView v1.50 A tool for Windows that collects information about all programs installed on your system and displays the details of the installed programs in one table. You can use it to get installed programs information for your local system, for remote computer on your network, and for external hard-drive plugged to your computer. It also allows you to easily uninstall a software on your local computer and remote computer (Including quiet uninstall if the installer supports it). System Requirements This tool works on any version of Windows, starting from Windows XP and up to Windows 11. Both 32-bit and 64-bit systems are supported. Changes: v1.50: Added 'Sort By' toolbar button. Start Using UninstallView UninstallView doesn't require any installation process or additional DLL files. In order to start using it, simply run the executable file - UninstallView.exe After running UninstallView, it scans your local system and collects all information about the programs installed on your system. When the scanning process is finished, the installed programs information is displayed in the main window. Notice: UninstallView first takes the official uninstall information in the Registry provided by the software itself and then tries to complete any missing information from other places. It's possible that some of the unofficial information collected by UninstallView will be inaccurate. Loading uninstall information from other sources In order to load uninstall information from other sources (instead of your current system), press F9 (Advanced Options) and choose the desired option in the 'Load From' combo-box: Local system - current user: This is the default option, the uninstall information is loaded from your local system and current user. Local system - all users: UninstallView loads the uninstall information from your local system and current user, and also from all other users on this system. The scanning of other ... |
|
5,254 | Feb 20, 2024 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/uninstallview1_th.png"border="0"> |
|
USBDeview v3.07 USBDeview v3.07 A small utility that lists all USB devices that currently connected to your computer, as well as all USB devices that you previously used. For each USB device, extended information is displayed: Device name/description, device type, serial number (for mass storage devices), the date/time that device was added, VendorID, ProductID, and more... USBDeview also allows you to uninstall USB devices that you previously used, disconnect USB devices that are currently connected to your computer, as well as to disable and enable USB devices. You can also use USBDeview on a remote computer, as long as you login to that computer with admin user. License This utility is released as freeware. You are allowed to freely distribute this utility via floppy disk, CD-ROM, Internet, or in any other way, as long as you don't charge anything for this. If you distribute this utility, you must include all files in the distribution package, without any modification. Disclaimer The software is provided "AS IS" without any warranty, either expressed or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The author will not be liable for any special, incidental, consequential or indirect damages due to loss of data or any other reason. System Requirement This utility works on Windows 2000, Windows XP, Windows 2003, Windows Vista, Windows Server 2008, Windows 7, Windows 8, Windows 10, and Windows 11. Both 32-bit and 64-bit systems are supported. Windows 98/ME is not supported. Known Issues -In order to disable/enable USB items on x64 systems, you also must use the x64 version of USBDeview. -The 'Created Date' column doesn't display correct values on Windows 7/8/Vista/2008. -Some USB devices with bad driver may cause USBDeview to hang. In order to bypass this problem, you should turn ... |
|
8,707 | Feb 20, 2024 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/usbdeview_th.png"border="0"> |
|
USBDriveLog v1.12 USBDriveLog v1.12 A tool for Windows 10 and Windows 11 that displays a log of all USB drives plugged to your computer. For every USB drive event, the following information is displayed: Device Model, Revision, Manufacturer, Serial Number, Plug Time, Unplug Time, Device ID, Device Capacity, and more... USBDriveLog allows you to retrieve the information from your local computer, from remote computer on your network, and from external hard drive. System Requirements This tool works on Windows 10 and Windows 11. Both 32-bit and 64-bit systems are supported. Previous versions of Windows are not supported because they don't have the needed event log channels. This tool is just a small standalone .exe file that you can run on any system without installing anything. USBDriveLog retrieves the information from the following event log channels: Microsoft-Windows-Partition/Diagnostic , Microsoft-Windows-Storsvc/Diagnostic , both channels are turned on by default on Windows 10 and Windows 11. If they are turned off from some reason, USBDriveLog will not display the USB drives log. Changes: v1.12: Added 'Sort By' toolbar button Start Using USBDriveLog USBDriveLog doesn't require any installation process or additional DLL files. In order to start using it, simply run the executable file - USBDriveLog.exe After running USBDriveLog, the main window displays the USB drive log of your current running system. You can select one or more items (or select all items by pressing Ctrl+A), and then use the 'Save Selected Items' option (Ctrl+S) to save the selected items to comma-delimited/tab-delimited/HTML/XML/JSON file. You can also press Ctrl+C to copy the selected items to the clipboard, and then paste them into Excel or other spreadsheet application. Read USB drive log from external hard drive If you want to view the USB drive log on external disk - Open ... |
|
2,353 | Apr 04, 2023 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/usbdrivelog_th.png"border="0"> |
|
USBLogView v1.26 USBLogView v1.26 USBLogView is a small utility that runs in the background and records the details of any USB device that is plugged or unplugged into your system. For every log line created by USBLogView, the following information is displayed: Event Type (Plug/Unplug), Event Time, Device Name, Description, Device Type, Drive Letter (For storage devices), Serial Number (Only for some types of devices), Vendor ID, Product ID, Vendor Name, Product Name, and more... You can easily select one or more log records and then export them into csv/tab-delimited/xml/html file. System Requirements This utility works on any version of Windows, starting from Windows 2000 and up to Windows 10. Both 32-bit and 64-bit systems are supported. Versions History Version 1.26: Fixed USBLogView to sort properly the 'Event Time' column and the numeric columns. tart Using USBLogView USBLogView doesn't require any installation process or additional dll files. In order to start using it, simply run the executable file - USBLogView.exe After running USBLogView, every time that a USB device is plugged or unplugged from your system, a new log line with the details of the device will be added to the main window of USBLogView. If you want to close the main window without stopping the recording of USB devices information, you can turn on the 'Put Icon On Tray' option, and then close the main window of USBLogView. You can also select one or more log lines in the main window of USBLogView, and then copy the log data to the clipboard (Ctrl+C) or export the log data into xml/html/csv/comma-delimited file (Ctrl+S) Translating USBLogView to other languages In order to translate USBLogView to other language, follow the instructions below: Run USBLogView with /savelangfile parameter: USBLogView.exe /savelangfile ... |
|
3,479 | Oct 21, 2019 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/usblogview_th.png"border="0"> |
|
VaultPasswordView v1.12 VaultPasswordView v1.12 A simple tool for Windows 11/10/8/7 that decrypts and displays the passwords and other data stored inside 'Windows Vault'. You can use it to decrypt the Windows Vault data of your currently running system, as well as the Windows Vault data stored on external hard drive. Changes Version 1.12: Fixed a problem with decrypting Windows Vault passwords from external drive on Windows 11 22H2. Updated to work properly in high DPI mode. System Requirements This utility works on any version of Windows, starting from Windows 7 and up to Windows 11. Both 32-bit and 64-bit systems are supported. Be aware that this tool is not very useful on Windows 7, simply because Microsoft started to use the Windows vault for storing IE and Windows mail passwords only from Windows 8. vYou can also use this tool on Windows XP with SP3 for decrypting the Windows Vault of external drive with Windows 11/10/8/7. Passwords And Data Stored by Windows Vault Passwords of Internet Explorer 10.0/11.0 and Microsoft Edge running under Windows 8 or later. (Be aware that IE10/IE11 under Windows 7 doesn't use the Windows Vault to store passwords). Login Information of Windows Mail application (Windows 8 or later). Windows Vault Location Windows vault files are stored in the following folders: C:\Users\[User Profile]\AppData\Local\Microsoft\Vault C:\ProgramData\Microsoft\Vault C:\Windows\system32\config\systemprofile\AppData\Local\Microsoft\Vault Inside these vault folders, there is Policy.vpol filename that contains the encryption key. The encryption key is used to decrypt the .vcrd files in the same vault folder. Notice For Windows 7 Users The term 'Windows Vault' is somewhat confusing because the passwords displayed by Windows 7 as Windows Vault are actually stored inside ... |
|
5,454 | Dec 20, 2023 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/vaultpasswordview1_th.png"border="0"> |
|
VideoCacheView v3.05 64bit VideoCacheView v3.05 64bit After watching a video in a Web site, you may want to save the video file into your local disk for playing it offline in the future. If the video file is stored in your browser's cache, this utility can help you to extract the video file from the cache and save it for watching it in the future. It automatically scans the entire cache of Internet Explorer, Mozilla-based Web browsers (Including Firefox), Opera, and Chrome, and then finds all video files that are currently stored in it. It allows you to easily copy the cached video files into another folder for playing/watching them in the future. If you have a movie player that is configured to play flv files, it also allows you to play the video directly from your browser's cache. Notice for users of Internet Explorer 10.0 and 11.0: In order to get videos from these versions of IE, you have to press F6 (Advanced Options) and choose the 'Internet Explorer 10 Cache' option in the 'Load video files...' section. Versions History Version 3.05 Added 'Manually Merge Selected Files' option (Ctrl+M). If you have split video files that VideoCacheView cannot detect and merge automatically, you can select all items, press Ctrl+M and then VideoCacheView will merge all selected items into one. After using the 'Manually Merge Selected Files' option, you can use the 'Copy Selected Files To...' option to generate the merged file. Be aware that the order of the merged files is determined according to the created time of every file. Using VideoCacheView VideoCacheView doesn't require any installation process or additional DLL files. In order to start using it, simply run the executable file (VideoCacheView.exe) After running VideoCacheView, it scan the cache folders of your Internet Explorer and Mozilla browsers, as ... |
|
4,308 | Dec 18, 2019 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/videocacheview_th.png"border="0"> |
|
ViVeTool-GUI v1.6.1 ViVeTool-GUI v1.6.1 Windows Feature Control GUI based on ViVeTool What is ViVeTool-GUI? ViVeTool-GUI let΄s you easily enable, disable and search for new hidden Features in Windows Insider Builds, with the use of a Button and a pretty UI. Disclaimer: From the author: "No one, including me / PeterStrick, the creators of ViVe and ViVeTool or the creators of mach2 are responsible for any damage or unintended side effects, this program might cause to your computer, by changing the Windows Feature Store. Use this program at your own risk." How to use it? Using it is simple. Either: 1) Select the Build for which you want to enable or disable features for. Image showing you how to perform Method 1 2) Wait for it to load in, open one of the Groups by pressing the Arrow, and select the Feature that you are looking for. 3) Press on Perform Action and perform your desired action for the entered feature ID. or 1) Press on "Manually change a Feature" (F12) 2) Enter a Feature ID 3) Press on Perform Action and perform your desired action for the selected feature. What are the additional features? Apart from being able to manage features, ViVeTool-GUI let΄s you also: Load in a Feature List of other Builds Search for Features Image showing you how to search Sort Features by Feature Name, Feature ID or Feature State Group Features by: Always Enabled, Always Disabled, Enabled by Default, Disabled by Default and Modifiable Copy Feature Names and IDs by right-clicking them Switch between Dark and Light Mode (Setting get΄s saved and applied on Start) and at ... |
|
1,842 | May 29, 2022 Peter Strick <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/ViVeToolGUI_th.png"border="0"> |
 |
VNCPassView v1.05 VNCPassView v1.05 VNCPassView is a small utility that recover the passwords stored by the VNC tool. It can recover 2 of passwords: password stored for the current logged-on user (HKEY_CURRENT_USER in the Registry), and password stored for the all users. Versions History Version 1.05 - Added support for the password of TightVNC. Using VNCPassView This utility doesn't require any installaion process or additional DLLs. Just run the executable file (VNCPassView.exe), and the VNC passwords will be displayed, if they are stored on your computer. Translating VNCPassView to other languages In order to translate VNCPassView to other language, follow the instructions below: Run VNCPassView with /savelangfile parameter: VNCPassView.exe /savelangfile A file named VNCPassView_lng.ini will be created in the folder of VNCPassView utility. Open the created language file in Notepad or in any other text editor. Translate all string entries to the desired language. Optionally, you can also add your name and/or a link to your Web site. (TranslatorName and TranslatorURL values) If you add this information, it'll be used in the 'About' window. After you finish the translation, Run VNCPassView, and all translated strings will be loaded from the language file. If you want to run VNCPassView without the translation, simply rename the language file, or move it to another folder. License This utility is released as freeware. You are allowed to freely distribute this utility via floppy disk, CD-ROM, Internet, or in any other way, as long as you don't charge anything for this. If you distribute this utility, you must include all files in the distribution package, without any modification ! Disclaimer The software is provided "AS IS" without any warranty, either expressed or implied, including, but not limited to, the ... |
|
8,751 | Sep 14, 2019 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/vncpassview_th.png"border="0"> |
|
Vole Media CHM 3.3.30330 Vole Media CHM 3.3.30330 Vole Media CHM is a Microsoft Word, CHM, images and multimedia integrated platform and platform controller. It can be used to multimedia help and teaching, introduction, communication, magic notes, photo gallery, documents collector and media play box. Show text,audio,images and video synchronously, simultaneously enhancing brain logic and audiovisual memory that has filled this domain blank. Ease of use is that the software using Microsoft Office WORD to edit text, and you only need to edit WORD and other conversion work is done automatically by the software. Therefore, as long as you can use Office WORD, you can use the software. Features: Publish VMC media library function, even without installing the software can also share your works. Setting the publishers copyright information and user permissions to protect your works Import, export functions, you can always import, export Office WORD files or CHM file in VMC media library. If you just want to convert Office WORD file into CHM file, you can simply import Office WORD file and then export the CHM file The auto play feature, you can playback of all or specified media. Corresponding text displayed simultaneously while play backing the media. And you can configure the play time and play number of repetitions Background music feature, when browsing background music automatically play, when playing media background music automatically pause, then auto start. You can adjust the background music volume or mute at any time Scene reproduction function, the software can save window size, position, color, style, sub-window docked position, auto play media configuration information to you published VMC media library, WYSIWYG. In this way, when opened, the media in the VMC media library will play automatically; the software interface will reproduce the state you specify For example, you use the software publish a multimedia greeting card, write on the blessings, add warm pictures, accompanied by ... |
|
8,581 | Apr 02, 2013 sanwhole.com |
|
Volumouse v1.65 - Control the sound volume with a wheel mouse Volumouse provides you a quick and easy way to control the sound volume on your system - simply by rolling the wheel of your wheel mouse. It allows you to define a set of rules for determining when the wheel will be used for changing the sound volume. For example: You can configure Volumouse to use your mouse wheel for volume control when the Alt key is hold down, when the left mouse button is down, when the mouse cursor is over the taskbar, and so on... When the conditions that you define are not satisfied, your mouse wheel will be used for the regular scrolling tasks, exactly as before. |
|
8,415 | Nov 16, 2008 Copyright (c) 2004 - 2008 Nir Sofer |
|
Volumouse v1.65 64bit - Control the sound volume with a wheel mouse 64bit Edition. Volumouse provides you a quick and easy way to control the sound volume on your system - simply by rolling the wheel of your wheel mouse. It allows you to define a set of rules for determining when the wheel will be used for changing the sound volume. For example: You can configure Volumouse to use your mouse wheel for volume control when the Alt key is hold down, when the left mouse button is down, when the mouse cursor is over the taskbar, and so on... When the conditions that you define are not satisfied, your mouse wheel will be used for the regular scrolling tasks, exactly as before. |
|
8,395 | Nov 16, 2008 Copyright (c) 2004 - 2008 Nir Sofer |
|
WakeMeOnLan v1.91 WakeMeOnLan v1.91 This utility allows you to easily turn on one or more computers remotely by sending Wake-on-LAN (WOL) packet to the remote computers. When your computers are turned on, WakeMeOnLan allows you to scan your network, and collect the MAC addresses of all your computers, and save the computers list into a file. Later, when your computers are turned off or in standby mode, you can use the stored computers list to easily choose the computer you want to turn on, and then turn on all these computers with a single click. WakeMeOnLan also allows you to turn on a computer from command-line, by specifying the computer name, IP address, or the MAC address of the remote network card. System Requirements And Limitations On some Windows 10/8 systems, the Wake-Up feature doesn't work if the 'Send The Wake-on-LAN Packet To...' option is set to 'Broadcast Address 255.255.255.255'. If you have this problem, you should set this option to 'Broadcast Address According to IP Address'. On the computer that you run WakeMeOnLan: WakeMeOnLan works on any version of Windows, starting from Windows 2000 and up to Windows 10, including x64 versions of Windows. On the remote computer: WakeMeOnLan can turn on the remote computer only if this feature is supported and enabled on the remote computer. Be aware that Wake-on-LAN feature only works on wired network. Wireless networks are not supported. In order to enable the Wake-on-LAN feature on the remote computer: - On some computers, you may need to enable this feature on the BIOS setup. - In the network card properties, you should go to the 'Power Management' and/or 'Advanced' ... |
|
5,056 | May 16, 2023 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/wakemeonlan_th.png"border="0"> |
|
Warzone 2100 v4.3.5 Warzone 2100 v4.3.5 A 100% free and open-source 3D real-time strategy game. In Warzone 2100, you command the forces of The Project in a battle to rebuild the world after mankind has almost been destroyed by nuclear missiles. The game offers campaign, multi-player, and single-player skirmish modes. An extensive tech tree with over 400 different technologies, combined with the unit design system, allows for a wide variety of possible units and tactics. Warzone 2100 was originally developed as a commercial game by Pumpkin Studios and published in 1999, and was released as open source by them in 2004, for the community to continue working on it. This download is for the Windows 64bit portable version. If you need the Windows 32bit portable version, download here. If you need the Windows 64bit installer version, download here. If you need the Windows 32bit installer version, download here. If you need the MacOS version, download here. If you need the Linux Debian 20.04 version, download here. If you need the Linux Debian 18.04 version, download here. Click here to visit the author's website. |
|
6,533 | Apr 19, 2023 Warzone 2100 Project <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/Warzone2_th.png"border="0"> |
|
WebBrowserPassView v2.12 WebBrowserPassView v2.12 A password recovery tool that reveals the passwords stored by the following Web browsers: Internet Explorer (Version 4.0 - 11.0), Mozilla Firefox (All Versions), Google Chrome, Safari, and Opera. This tool can be used to recover your lost/forgotten password of any Website, including popular Web sites, like Facebook, Yahoo, Google, and GMail, as long as the password is stored by your Web Browser. After retrieving your lost passwords, you can save them into text/html/csv/xml file, by using the 'Save Selected Items' option (Ctrl+S). System Requirements And Limitations This utility works on any version of Windows, starting from Windows 2000, and up to Windows 10, including 64-bit systems. Older versions of Windows (Windows 98/ME) are not supported, because this utility is a Unicode application. Currently, WebBrowserPassView cannot retrieve passwords from external hard-drive (Except of Firefox Web browser). Support for that might be added in future versions. On Internet Explorer 7.0-9.0, the passwords are encrypted with the URL of the Web site, so WebBrowserPassView uses the history file of Internet Explorer to decrypt the passwords. If you clear the history of Internet Explorer, WebBrowserPassView won't be able to decrypt the passwords. On Google Chrome - passwords originally imported from Internet Explorer 7.0-9.0, cannot be decrypted. Changes: v2.12: Fixed to display the password of Chromium-based Web browser if it's not encrypted (Like in the portable version of Brave). Updated to work properly in high DPI mode. Using WebBrowserPassView WebBrowserPassView doesn't require any installation process or additional DLL files. In order to start using it, simply run the executable file - WebBrowserPassView.exe After running it, the main window of WebBrowserPassView displays the list of all Web browser passwords found in your system. ... |
|
3,874 | Dec 11, 2022 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/webbrowserpassview_th.png"border="0"> |
|
WebCacheImageInfo v1.32 WebCacheImageInfo v1.32 WebCacheImageInfo is a simple tool that searches for JPEG images with EXIF information stored inside the cache of your Web browser (Internet Explorer, Firefox, or Chrome), and then it displays the list of all images found in the cache with the interesting information stored in them, like the software that was used to create the image, the camera model that was used to photograph the image, and the date/time that the image was created. System Requirements And Limitations This utility works in any version of Windows, starting from Windows XP and up to Windows 10. Both 32-bit and 64-bit systems are supported. The following Web browsers are supported: Internet Explorer, Mozilla Firefox, SeaMonkey, and Google Chrome. Opera is not supported because it stores the JPEG images in Webp format. WebCacheImageInfo won't work if you configure your Web browser to clear the cache after closing it. It's recommended to close all windows of your Web browser before using WebCacheImageInfo, to ensure that all cache files are saved to the disk. Be aware that WebCacheImageInfo only displays JPEG images with EXIF information stored in them. It doesn't display other images stored in the cache of your Web browsers. Change Info: Version 1.32: Updated to work properly with the new cache partitioning of Chrome. (In previous versions, URL was displayed with _dk_ prefix). Start Using WebCacheImageInfo WebCacheImageInfo doesn't require any installation process or additional DLL files. In order to start using it, simply run the executable file - WebCacheImageInfo.exe After running it, WebCacheImageInfo begins to scan the cache of your Web browser and displays every JPEG image with EXIF information found inside the cache. You may need to wait up to a few minutes until the scanning ... |
|
8,287 | Feb 22, 2021 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/webcacheimageinfo_th.png"border="0"> |
|
WebVideoCap v1.33 - Capture Flash video and RTSP/MMS streams. While watching a video in a Web site, you may sometimes want to save the video into your local drive, and then play it offline later. This utility allows you to capture .flv (Flash Video) files and RTSP/MMS video streams while the Web browser download and play them inside a Web page. After the entire video file is downloaded and played by the Web browser, the video file is saved in the folder that you selected, and you can play it offline later with any Video player. WebVideoCap can capture the video files of most popular video-sharing sites, including YouTube, Google Video, Yahoo Video, iFilm, Metacafe, Putfile, and more... |
|
8,507 | Nov 16, 2008 Copyright (c) 2007 - 2008 Nir Sofer |
|
WhatInStartup v1.35 32bit WhatInStartup v1.35 32bit This utility displays the list of all applications that are loaded automatically when Windows starts up. For each application, the following information is displayed: Startup Type (Registry/Startup Folder), Command-Line String, Product Name, File Version, Company Name, Location in the Registry or file system, and more. It allows you to easily disable or delete unwanted programs that run in your Windows startup. You can use it on your currently running instance of Windows, as well as you can use it on external instance of Windows in another drive. WhatInStartup also supports a special "Permanent Disabling" feature - If a program that you previously disabled added itself again to the startup list of Windows, WhatInStartup will automatically detect the change and disable it again. System Requirements This utility works on any version of Windows starting from Windows 2000 and up to Windows 8. Both 32-bit and 64-bit systems are supported. Versions History Version 1.35: Added 'Auto Size Columns+Headers' option. Added x64 build. Using WhatInStartup WhatInStartup doesn't require any installation process or additional dll files. In order to start using it, simply copy the executable file (WhatInStartup.exe) info any folder you like, and run it. After running it, the main window of WhatInStartup displays the list of all programs that are loaded at Windows startup. You can select one or more items, and then disable them (F7), enable them back after previously disabled (F8), delete them (Ctrl+Delete), or save them into text/csv/html/xml file (Ctrl+S). Permanent Disabling Permanent Disabling is a special feature of WhatInStartup that allows you to Permanently enforce the disabling of programs in Windows startup. Many programs add themselves into the Windows startup list without even asking you, and even if you disable or delete them, these programs add themselves ... |
|
4,840 | Jan 13, 2017 Nir Sofer <img src="http://www.oldergeeks.com/downloads/gallery/thumbs/whatinstartup_th.png"border="0"> |
|
WhatInStartup v1.35 64bit WhatInStartup v1.35 64bit This utility displays the list of all applications that are loaded automatically when Windows starts up. For each application, the following information is displayed: Startup Type (Registry/Startup Folder), Command-Line String, Product Name, File Version, Company Name, Location in the Registry or file system, and more. It allows you to easily disable or delete unwanted programs that run in your Windows startup. You can use it on your currently running instance of Windows, as well as you can use it on external instance of Windows in another drive. WhatInStartup also supports a special "Permanent Disabling" feature - If a program that you previously disabled added itself again to the startup list of Windows, WhatInStartup will automatically detect the change and disable it again. System Requirements This utility works on any version of Windows starting from Windows 2000 and up to Windows 8. Both 32-bit and 64-bit systems are supported. Versions History Version 1.35: Added 'Auto Size Columns+Headers' option. Added x64 build. Using WhatInStartup WhatInStartup doesn't require any installation process or additional dll files. In order to start using it, simply copy the executable file (WhatInStartup.exe) info any folder you like, and run it. After running it, the main window of WhatInStartup displays the list of all programs that are loaded at Windows startup. You can select one or more items, and then disable them (F7), enable them back after previously disabled (F8), delete them (Ctrl+Delete), or save them into text/csv/html/xml file (Ctrl+S). Permanent Disabling Permanent Disabling is a special feature of WhatInStartup that allows you to Permanently enforce the disabling of programs in Windows startup. Many programs add themselves into the Windows startup list without even asking you, and even if you disable or delete them, these programs add themselves ... |
|
4,928 | Jan 13, 2017 Nir Sofer <img src="http://www.oldergeeks.com/downloads/gallery/thumbs/whatinstartup_th.png"border="0"> |
|
WhatIsHang 1.27 WhatIsHang 1.27 Sometimes, Windows or a running application hangs, the user interface abruptly stops responding, and you cannot determine what has caused the problem or how to troubleshoot the issue. This utility tries to detect the software or process that is currently hung, and displays some information that may allow you to sort out and understand what exactly is at the root of such unexpected behavior. Most of the information displayed in WhatIsHang's report, like Call Stack, Stack Data, Processor Registers, and Memory Data is designed for users with Windows programming knowledge. However, WhatIsHang also presents a list of strings and dll files related to the hang issue that can help users without programming skills understand and overcome the causes of the problem and restore normal operation. Changelog: Version 1.27 Fixed bug: The 'Automatically Get Report' menu item failed to work properly. |
|
6,229 | Sep 02, 2017 Nir Sofer <img src="http://www.oldergeeks.com/downloads/gallery/thumbs/whatishang_th.png"border="0"> |
|
WhoisCL v1.90 WhoisCL v1.90 WhoisCL is a simple command-line utility that allows you to easily get information about a registered domain. It automatically connect to the right WHOIS server, according to the top-level domain name, and retrieve the WHOIS record of the domain. It supports both generic domains and country code domains. System Requirements Windows operating system: Windows 98/ME/2000/XP/2003/2008/7/8/10. Internet connection. On a firewall, you should allow outgoing connections to port 43. Versions History Version 1.90 - Added -s command-line option, which allows you to specify the WHOIS server to use instead of taking it from the servers list of WhoisCL. Usage WhoisCL [-r] [-n] [-socks4] [-socks5] Domain [-r] If you specify this option, the top remark lines of the WHOIS record are automatically removed. [-n] If you specify this option, WhoisCL will get the correct WHOIS server from xx.whois-servers.net, instead of using the internal WHOIS servers list. [-socks4] Specifies SOCKS4 proxy to use, in IPAddress:Port format [-socks5] Specifies SOCKS5 proxy to use, in IPAddress:Port format Domain Domain name. Examples: WhoisCL microsoft.com WhoisCL -r google.com WhoisCL -n w3c.org WhoisCL -socks4 192.168.0.55:1080 nirsoft.net WhoisCL -socks5 192.168.10.55:9980 facebook.com Example for WhoisCL output: WHOIS Server: whois.markmonitor.com Registrant: Google Inc. (DOM-258879) 2400 E. Bayshore Pkwy Mountain View CA 94043 US Domain Name: google.com Registrar Name: Markmonitor.com Registrar Whois: whois.markmonitor.com Registrar Homepage: https://www.markmonitor.com Administrative Contact: DNS Admin (NIC-1340142) Google Inc. 2400 E. Bayshore Pkwy Mountain View CA 94043 US dns-admin@google.com +1.6503300100 Fax- +1.6506181499 Technical Contact, Zone Contact: DNS Admin (NIC-1340144) Google Inc. 2400 E. Bayshore Pkwy Mountain View CA 94043 US dns-admin@google.com +1.6503300100 Fax- +1.6506181499 Created on..............: 1997-Sep-15. Expires on..............: 2011-Sep-14. Record last updated on..: 2005-Jul-25 20:14:20. Domain servers in listed order: NS3.GOOGLE.COM NS4.GOOGLE.COM NS1.GOOGLE.COM NS2.GOOGLE.COM MarkMonitor.com - The Leader in Corporate Domain Management ---------------------------------------------------------- For Global Domain Consolidation, Research & Intelligence, and Enterprise DNS, go to: ... |
|
8,599 | Apr 11, 2021 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/whoiscl_th.png"border="0"> |
|
WhoIsConnectedSniffer v1.28 WhoIsConnectedSniffer v1.28 A network discovery tool that listens to network packets on your network adapter using a capture driver (WinpCap or MS network monitor) and accumulates a list of computer and devices currently connected to your network. WhoIsConnectedSniffer uses various protocols to detect the computers connected to your network, including ARP, UDP, DHCP, mDNS, and BROWSER. For every detected computer or device, the following information is displayed: (Some of the fields might be empty if the information cannot be found inside the packets) IP Address, MAC Address, name of the device/computer, description, Operating System, Network Adapter Company, IPv6 Address. After collecting the connected computers/devices information, you can easily export the list to tab-delimited/comma-delimited/xml/html file. WhoIsConnectedSniffer vs Other NirSoft Tools As you may know, NirSoft already provides other tools (Wireless Network Watcher, NetBScanner) that scan the network and show the computers that are currently connected. As opposed to the other tools, WhoIsConnectedSniffer doesn't perform any scanning and it doesn't send any packet to the other computers. WhoIsConnectedSniffer only listens to the packets sent by other computers and devices, analyzes them and then displays the result on the main window. WhoIsConnectedSniffer also provides some information that the other tools cannot get, like operating system, description text of the computer, IPv6 address. System Requirements And Limitations Any version of Windows, starting from Windows 2000, and up to Windows 11. Both 32-bit and 64-bit systems are supported. When using Microsoft Network Monitor driver on 64-bit system, you must use the 64-bit version of WhoIsConnectedSniffer. You have to install one of the following capture drivers: WinPcap capture driver Network Monitor driver WhoIsConnectedSniffer cannot detect a device or computer if it doesn't send any packet that is received ... |
|
8,872 | Feb 09, 2022 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/whoisconnectedsniffer_th.png"border="0"> |
|
WhoisThisDomain v2.42 WhoisThisDomain v2.42 WhoisThisDomain is a domain registration lookup utility allows you to easily get information about a registered domain. It automatically connects to the right WHOIS server, according to the top-level domain name, and retrieve the WHOIS record of the domain. It supports both generic domains and country code domains. System Requirements Windows operating system: Any version of Windows, from Windows 2000 and up to Windows 10. Internet connection. On a firewall, you should allow outgoing connections to port 43. Changes: Version 2.42 Updated the WHOIS server of .mx domains. Click here to visit the author's website. |
|
8,513 | Apr 03, 2020 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/whoistd_th.png"border="0"> |
|
WifiChannelMonitor v1.70 WifiChannelMonitor v1.70 A utility for Windows that captures wifi traffic on the channel you choose, using Microsoft Network Monitor capture driver in monitor mode, and displays extensive information about access points and the wifi clients connected to them. WifiChannelMonitor also allows you to view the information about wifi clients that are not connected to any access points, including the list of SSIDs (network names) that they are trying to connect. For every access point, the following information is displayed: SSID, MAC Address, Device Manufacturer , PHY Type, Channel, RSSI, Security, Beacons Count, Probe Responses Count, Data Bytes, Retransmitted Data Bytes, and more... For every client, the following information is displayed: MAC Address, Device Manufacturer, SSID list that the client tries to connect, Sent Data Bytes, Received Data Bytes, Probe Requests Count, and more... System Requirements Windows 10/Vista/7/8/2012 - 32-bit or 64-bit. (In previous version of Windows , there is no support for wifi monitor mode) Microsoft Network Monitor 3.x - You can download and install it from this Web page or from this Web page . Wireless network adapter and a driver that works properly in 'monitor mode' under Windows. See the remarks about that in the 'Known Problems' section below, it's very important !! Starting from version 1.55 - You can also monitor Wifi traffic even if your card doesn't support 'monitor mode'. When your card is not in 'monitor mode' - you'll mostly see the traffic of your own network. You can also use WifiChannelMonitor to watch wifi information offline by importing a capture pcap file created under Linux with airodump-ng or wireshark. In this case, there is no need for capture driver and you can also use it under Windows XP. Version 1.70: ... |
|
6,196 | Aug 27, 2021 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/wifichannelmonitor_th.png"border="0"> |
|
WifiDiagnosticsView v1.05 WifiDiagnosticsView v1.05 A Wifi diagnostics tool for Windows 11/10/8/7/Vista WifiDiagnosticsView monitors the wireless network service of the Windows operating system and displays any event that occurs while WifiDiagnosticsView is running, including wireless networks scan, connect to access point, disconnect from access point, failed connection attempt, and so on.. When a failure is detected, the error code and error description is displayed. System Requirements This tool works on any version of Windows, starting from Windows Vista and up to Windows 11. Both 32-bit and 64-bit systems are supported. This tool is just a small standalone .exe file that you can run on any system without installing anything. Changes Version 1.05: Added 'Black Background' option (Under the View menu). When it's turned on, the main table is displayed in black background and white text, instead of default system colors. Added 'Full Screen' mode (View -> Full Screen or F11 key). Start Using WifiDiagnosticsView WifiDiagnosticsView doesn't require any installation process or additional DLL files. In order to start using it, simply run the executable file - WifiDiagnosticsView.exe After running WifiDiagnosticsView, it starts to monitor the wireless network service on your system, and every event is added to the main window of WifiDiagnosticsView. Be aware that the following columns are filled only when they are relevant to the event: Profile Name, SSID, Failure Code, Failure Text, BSSID, Connection Mode. Put Icon On Tray If you want to run WifiDiagnosticsView in the background without displaying any window, simply turn on the 'Put Icon On Tray' option (Under the Options menu). After you enable this option, you can close the main window of WifiDiagnosticsView, and it'll continue to monitor your Wifi connections in the background. When you want to open the window of WifiDiagnosticsView again, simply double-click the icon of WifiDiagnosticsView ... |
|
1,373 | Mar 04, 2024 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/wifidiagnosticsview_th.png"border="0"> |
|
WifiHistoryView v1.65 WifiHistoryView v1.65 A simple tool for Windows 11/10/8/7/Vista that displays the history of connections to wireless networks on your computer. For every event that the computer connected to a wireless network or disconnected from it, the following information is displayed: The date/time that the event occurred, network name (SSID), profile name, network adapter name, BSSID of the router/Access Point, and more... WifiHistoryView can read the wifi history information from a running system or from external event log file of another computer. You can also view the wifi history of remote computer on your network, as long as you connect the remote computer as Administrator. System Requirements Ths utility works on any version of Windows, starting from Windows Vista and up to Windows 11. Both 32-bit and 64-bit systems are supported. Previous versions of Windows (Windows XP and earlier) are not supported. Source of Information WifiHistoryView loads the Wifi history information from the 'Microsoft-Windows-WLAN-AutoConfig/Operational' event log of Windows. This even log is usually stored in the following file: C:\windows\System32\winevt\Logs\Microsoft-Windows-WLAN-AutoConfig%4Operational.evtx Changes: v1.65: Added 'Connect Duration' column, which displays the total time that the network was connected (Only for 'Disconnected' events) Added 'Sort By' toolbar button Start Using WifiHistoryView WifiHistoryView doesn't require any installation process or additional DLL files. In order to start using it, simply run the executable file - WifiHistoryView.exe After running WifiHistoryView, the main window displays the history of connecting/disconnecting to wireless networks on your computer. You can easily select one or more items and then copy them to the clipboard and paste them into Excel or other spreadsheet application. You can also export the selected items into text/csv/tab-delimited/xml/html file by using the 'Save Selected Items' option (Ctrl+S). If you want to view the wifi history information from event log file of another computer, open the 'Advanced Options' window (F9) , choose 'External File' in ... |
|
5,179 | Feb 10, 2024 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/wifihistoryview1_th.png"border="0"> |
|
WifiInfoView v2.93 WifiInfoView v2.93 Free tool that scans the wireless networks in your area and displays extensive information about them. Information includes: Network Name (SSID), MAC Address, PHY Type (802.11g or 802.11n), RSSI, Signal Quality, Frequency, Channel Number, Maximum Speed, Company Name, Router Model and Router Name (Only for routers that provides this information), and more... When you select a wireless network in the upper pane of this tool, the lower pane displays the Wi-Fi information elements received from this device, in hexadecimal format. WifiInfoView also has a summary mode, which displays a summary of all detected wireless networks, grouped by channel number, company that manufactured the router, PHY type, or the maximum speed. System Requirements Operating System: This utility works on Windows Vista, Windows 7, Windows 8, Windows Server 2008, Windows 10, and Windows 11. Both 32-bit and x64 systems are supported. Windows XP is not supported because this tool is based on new Wi-Fi API that doesn't exist on Windows XP. If you want to get wireless networks information on Windows XP, you can use the WirelessNetView utility. Wireless network adapter and wireless card driver that works with the built-in wireless support of Windows Vista/7/8/2008. If you don't have a compatible wireless adapter and driver, "cannot find wireless adapter" error will be displayed. In order to watch 5GHz wireless networks, you have to use a wireless network adapter that supports 5 GHz channels. Changes v2.93: Updated to detect 802.11be access points. Start Using WifiInfoView WifiInfoView doesn't require any installation process or additional dll files. In order to start using it, simply run the executable file - WifiInfoView.exe After you run WifiInfoView, the list of detected wireless networks in your area is displayed on the upper pane and it's updated at very high ... |
|
5,283 | Mar 25, 2024 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/wifiinfoview1_th.png"border="0"> |
|
Win9x PassView v1.1 The Win9x PassView utility reveals the passwords stored on your computer by Windows 95/98 operating system. It can reveal 4 types of passwords: * The user name and the password of the current logged-on user. * The cached passwords of the current logged-on user. * The passwords of your network shares (Only with share-level access control). * The password of the screen saver. |
|
8,539 | Nov 12, 2008 Copyright (c) 2002 Nir Sofer |
|
Winamp Backup Tool v3.6.3 Winamp Backup Tool v3.6.3 Tired of losing your library database? Do you need the ability to move your Winamp config from one PC to another? Enjoy the ultimate Backup Tool for Winamp! The tool was written by Christoph Grether. A lot of people posted in the Winamp.com forums, that they have lost their library database, so I had the idea to create a Backup Tool, using NSIS as program language. The main idea was, that NSIS provides a step by step wizard for installers and already has a built-in localization system. So I decided to write the tool in 2010. Since I'm using Winamp for a very long time, I was aware about all dependencies with saved settings for the native components and for 3rd party components. Though, there were a lot of other problems, so I asked Paweł for help. He wrote a lot of backend code and code for the GUI, so that I had enough time to work on the main backup system. As of today, the tool is the best and most safe way to save all Winamp related settings, databases, skins, visualization presets etc. Even if some people still prepare to simply backup their Winamp settings folder, the tool is the better choice. Because the Winamp settings folder only holds settings for the native components (exluding Winamp Pro Registration Data, Skins, Vis Presets and especially 3rd party configuration files). Thanks go to Paweł Porwisz, who helped during the 1.0 period with a lot of code and Darren Owen. Features Allows you to backup/restore all of your Winamp settings, media library database, plugin settings, skins, visualization presets, tray control icon packs, file type icon libraries and even your Winamp Pro reg data! Allows you to create several zip compressed backup archives! Allows ... |
|
7,042 | May 15, 2019 Christoph Grether and Paweł Porwisz <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/Winamp_Backup_Tool_Main_th.png"border="0"> |
|
WinDefThreatsView v1.15 WinDefThreatsView v1.15 A free tool for Windows 11/10 that displays all threats detected by Windows Defender so you can set the default action for all threats at once. Default actions: Allow, Quarantine, Clean, Remove, Block, or No Action. You can use this tool on your local computer and also on remote computer, as long as you have permission to access WMI on the remote machine. For every threat, the following information is displayed: Filename, Threat Name, Severity, Process Name, Initial Detect Time, Status Change Time, Remediation Time, Threat ID, Threat Status, Default Threat Action, and more... System Requirements This tool works only on Windows 11, Windows 10 and Windows 8.1. Both 32-bit and 64-bit systems are supported. You can also use this tool on Windows 7 to connect a Windows 11/10 remote computer. Changes v1.15 Added option to change the sorting column from the menu (View -> Sort By). Like the column header click sorting, if you click again the same sorting menu item, it'll switch between ascending and descending order. Also, if you hold down the shift key while choosing the sort menu item, you'll get a secondary sorting. Added 'Sort By' toolbar button Fixed a few high DPI mode issues Fixed issue: When copying data to the clipboard or exporting to tab-delimited file, every line contained an empty field in the end of the line. Start Using WinDefThreatsView WinDefThreatsView doesn't require any installation process or additional DLL files. In order to start using it, simply run the executable file - WinDefThreatsView.exe After running WinDefThreatsView, the main window displays the list of all threats detected by Windows Defender Antivirus. Connect Windows Defender on remote computer In order to view the Windows Defender threats on a remote computer, simply open the 'Advanced Options' window (F9), choose the ... |
|
3,397 | Mar 01, 2024 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/windefthreatsview1_th.png"border="0"> |
|
Windows 11 Requirements Check Tool v1.4.0 Windows 11 Requirements Check Tool v1.4.0 A free tool to see if your PC meets the requirements to run Windows 11. In addition it checks if your PC can support (gaming) features like AutoHDR and DirectStorage. Runs on Windows 8.1, Windows 10 or Windows 11. Supports 32-bit and 64-bit systems, including Windows on ARM. This tool is a standalone Win32 application written in C++. It does not install anything and spawns no additional processes. Requirement Checks The tool performs the following checks as specified in this document from Microsoft: System Type Shows whether your PC contains an x86, x64 or ARM-processor. In addition it shows if your operating system is 32-bit or 64-bit. This item turns red if your processor does not support 64-bit instructions and registers, also known as long mode. Windows Shows the version of Windows you are running. This item checks if your version of Windows can be upgraded to Windows 11. Processor Shows the processor in your computer. This item checks if your processor has at least 2 cores and runs at 1 GHz or higher. In addition, this item also checks if your processor supports the following features and instructions: PAE (Physical Address Extension) is a processor feature that enables x86 and x86-64 processors to access more than 4 GB of physical memory on capable versions of Windows. NX (No-eXecute) is a processor feature that allows memory pages to be marked as non-executable. The feature enables the processor to help protect against malicious code exploits and is an integral part of hardware-enforced Data Execution Prevention (DEP). If not supported, check your BIOS whether "Data Execution Prevention," "XD," "Execute Disable," or "NX" is disabled. DEP is a Windows feature since 2004 (Windows XP SP2). SSE4.1 (Streaming SIMD Extensions 4.1) ... |
|
1,847 | Feb 01, 2022 ByteJams.com <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/Win11ReqCheck1_th.png"border="0"> |
|
WinLogOnView v1.41 WinLogOnView v1.41 A simple tool for Windows 11/10/8/7/Vista/2008 that analyses the security event log of Windows operating system, and detects the date/time that users logged on and logged off. For every time that a user log on/log off to your system, the following information is displayed: Logon ID, User Name, Domain, Computer, Logon Time, Logoff Time, Duration, and network address. WinLogOnView also allows you to easily export the logon sessions information to tab-delimited/comma-delimited/html/xml file. System Requirements This utility works on Windows Vista/7/8/2008/10/11. Both 32-bit and 64-bit systems are supported. On Windows 10 April Update (1803) you have to turn on the 'Use New Event Log API' option. Older systems are not supported because the log on/log off information is not added to the security event log. Known Limitations This tool is based on the security event log of Windows, and the accuracy of the displayed information depends on the availability and accuracy of the data stored inside the security event log. It's possible that some of the information will be missing, like a logon session without logoff time. Bw aware that WinLogOnView currently uses the following events: 4648 (Logon), 4647 (LogOff), 4624 (Logon), 4800 (Workstation lock). Changes Version 1.41: When connecting a remote computer and the 'Use New Event Log API' option is turned on, the loading process is now much faster than the previous versions. Start Using WinLogOnView WinLogOnView doesn't require any installation process or additional dll files. In order to start using it, simply run the executable file - WinLogOnView.exe After running it, the main window of WinLogOnView displays the list of all logon sessions detected on your system. You can easily export the list to html/xml/tab-delimited/comma-delimited file by using the 'Save Selected Items' option. You can also copy the selected items to the clipboard (Ctrl+C) and then paste them into ... |
|
8,889 | Jan 04, 2022 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/winlogonview_th.png"border="0"> |
|
WinMailPassRec v1.00 WinMailPassRec v1.00 A password recovery tool for Windows 10 and Windows 11 that displays the details of all POP3/IMAP/SMTP/Exchange accounts stored in the mail application of Windows operating system. For every account, the following information is displayed: Account Name, Email, Mailbox Type, Mail Server, User, Password, Outgoing Server, Outgoing Server Password, Account Creation Time, Last Used Time, Last Sync Attempt Time, Last Sync Success Time. System Requirements This tool works with the built-in mail application of Windows 10 and Windows 11. Both 32-bit and 64-bit systems are supported. You can also use this tool on older versions of Windows (like Windows 7) for recovering data from external disk with Windows 10 or Windows 11. Be aware that WinMailPassRec can only recover the passwords of POP3/IMAP/SMTP/Exchange accounts. It cannot recover the passwords for other types of accounts like Microsoft account or Gmail. General Information The mail App of Windows 10 and Windows 11 stores the POP3/IMAP/SMTP/Exchange accounts information in 2 different places: Under the following Registry key: HKEY_CURRENT_USER\Software\Microsoft\ActiveSync\Partners (Every account on different subkey) - Most of the account information is stored under this Registry key, but without the server and password information. The passwords and server information are encrypted and stored inside Windows Vault (Located under the following folder: %LocalAppData%\Microsoft\Vault\4BF4C442-9B8A-41A0-B380-DD4A704DDB28 ) WinMailPassRec combines the information from the above 2 places. Start Using WinMailPassRec WinMailPassRec doesn't require any installation process or additional DLL files. In order to start using it, simply run the executable file - WinMailPassRec.exe After running WinMailPassRec, the 'Advanced Options' window is opened, and then you can choose to load the Windows Mail accounts from your current user, or from external hard drive plugged to your computer. If you choose to load the Windows Mail accounts from external disk, you have to fill more fields in order to decrypt the mail passwords. After ... |
|
1,729 | Mar 08, 2022 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/winmailpassrec_th.png"border="0"> |
|
WinPrefetchView v1.36 WinPrefetchView v1.36 Each time that you run an application in your system, a Prefetch file which contains information about the files loaded by the application is created by Windows operating system. The information in the Prefetch file is used for optimizing the loading time of the application in the next time that you run it. WinPrefetchView is a small utility that reads the Prefetch files stored in your system and displays the information stored in them. By looking in these files, you can learn which files every application is using, and which files are loaded on Windows boot. System Requirements This utility works on any version of Windows, starting from Windows XP, and up to Windows 10. Earlier versions of Windows are irrelevant for this utility, because they don't use Prefetch files. Versions History Version 1.36: Fixed WinPrefetchView to display the correct 'Run Counter' values on the Prefetch files created by the latest builds of Windows 10. Using WinPrefetchView WinPrefetchView doesn't require any installation process or additional DLL files. In order to start using it, simply run the executable file - WinPrefetchView.exe The main window of WinPrefetchView contains 2 panes: The upper pane displays the list of all Prefetch files in your system. When you select a file in the upper pane, the lower pane displays the list of files stored inside the selected Prefetch file, which represent the files that were loaded by the application in the previous times that you used it. These is also special Prefetch file, with 'NTOSBOOT-B00DFAAD.pf' filename, which can show you the list of files that are loaded during Windows boot process. WinPrefetchView also allows you to delete the selected Prefetch files. However, be aware that even when your delete a Prefetch file, it'll be created again by the operating system ... |
|
3,249 | Feb 12, 2020 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/winprefetchview_th.png"border="0"> |
|
WinUpdatesView v1.11 32bit WinUpdatesView v1.11 32bit WinUpdatesView is a simple tool that displays the history of Windows updates on your system. WinUpdatesView can load the Windows updates history from your local system, using API, and it can also read and parse the Windows updates database file (DataStore.edb) from external drive or from remote computer on your network. For every Windows update history record, WinUpdatesView displays the following fields: Title, Description, Install Date, Update Operation (Install, Uninstall, Not Started, In Progress), Operation Result (Succeeded, Succeeded With Errors, Failed, Aborted), Category, Information URL, Support URL, Uninstall Notes, Client Application ID, Service ID, Update ID, Revision Number, Unmapped Result Code, Server Selection, hResult System Requirements This tool works on any version of Windows, starting from Windows XP, and up to Windows 10. Both 32-bit and 64-bit systems are supported. Changes: Version 1.11 Added 'KB Number' column. Start Using Windows Updates History Viewer WinUpdatesView doesn't require any installation process or additional DLL files. In order to start using it, simply run the executable file - WinUpdatesView.exe After running WinUpdatesView, it loads the Windows updates history from your local system, using API, and displays the information on the main window. You can select one or more items and then export them to csv/tab-delimited/HTML5/XML/JSON file (File -> 'Save Selected Items' or Ctrl+S ), or you can copy them to the clipboard (Ctrl+C) and then paste them to Excel or other application. If you want to load the Windows updates history from another source (remote computer or external drive), go to the 'Advanced Options' window (F9) and choose the desired options. Quick Filter If you want to search a specific Windows update, simply press Ctrl+Q, and in the 'Quick Filter' window, type the string you want to find, and WinUpdatesView will instantly display the Windows updates contain the string you typed. Getting Windows updates history from a remote ... |
|
3,420 | Apr 09, 2020 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/windowsupdatesview1_th.png"border="0"> |
|
WinUpdatesView v1.11 64bit WinUpdatesView v1.11 64bit WinUpdatesView is a simple tool that displays the history of Windows updates on your system. WinUpdatesView can load the Windows updates history from your local system, using API, and it can also read and parse the Windows updates database file (DataStore.edb) from external drive or from remote computer on your network. For every Windows update history record, WinUpdatesView displays the following fields: Title, Description, Install Date, Update Operation (Install, Uninstall, Not Started, In Progress), Operation Result (Succeeded, Succeeded With Errors, Failed, Aborted), Category, Information URL, Support URL, Uninstall Notes, Client Application ID, Service ID, Update ID, Revision Number, Unmapped Result Code, Server Selection, hResult System Requirements This tool works on any version of Windows, starting from Windows XP, and up to Windows 10. Both 32-bit and 64-bit systems are supported. Changes: Version 1.11 Added 'KB Number' column. Start Using Windows Updates History Viewer WinUpdatesView doesn't require any installation process or additional DLL files. In order to start using it, simply run the executable file - WinUpdatesView.exe After running WinUpdatesView, it loads the Windows updates history from your local system, using API, and displays the information on the main window. You can select one or more items and then export them to csv/tab-delimited/HTML5/XML/JSON file (File -> 'Save Selected Items' or Ctrl+S ), or you can copy them to the clipboard (Ctrl+C) and then paste them to Excel or other application. If you want to load the Windows updates history from another source (remote computer or external drive), go to the 'Advanced Options' window (F9) and choose the desired options. Quick Filter If you want to search a specific Windows update, simply press Ctrl+Q, and in the 'Quick Filter' window, type the string you want to find, and WinUpdatesView will instantly display the Windows updates contain the string you typed. Getting Windows updates history from a remote ... |
|
3,464 | Apr 09, 2020 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/windowsupdatesview1_th.png"border="0"> |
|
Wireless Network Watcher v2.41 Wireless Network Watcher v2.41 A small utility that scans your wireless network and displays the list of all computers and devices that are currently connected to your network. For every computer or device that is connected to your network, the following information is displayed: IP address, MAC address, the company that manufactured the network card, and optionally the computer name. You can also export the connected devices list into html/xml/csv/text file, or copy the list to the clipboard and then paste into Excel or other spreadsheet application. System Requirements And Limitations This utility works on Windows 2000, Windows XP, Windows Server 2003/2008, Windows Vista, Windows 7, Windows 8, Windows 10 and Windows 11. This utility can only scan a wireless network that you're currently connected to. It cannot scan other wireless networks. In rare cases, it's possible that Wireless Network Watcher won't detect the correct wireless network adapter, and then you should go to 'Advanced Options' window (F9), and manually choose the correct network adapter. although this utility is officially designed for wireless networks, you can also use it to scan a small wired network. Changes: Version 2.41 Added 'Scan IPv6 Addresses' option. You can turn it off if you don't need the IPv6 Addresses information. Using Wireless Network Watcher Wireless Network Watcher doesn't require any installation process or additional dll files. In order to start using it, simply extract the executable file (WNetWatcher.exe) from the zip file, and run it. If you want, you can also download WNetWatcher with full install/uninstall support (wnetwatcher_setup.exe), so a shortcut for running WNetWatcher will be automatically added into your start menu. After running WNetWatcher, it automatically locates your wireless adapter, and scans your network. After a few seconds, you should start see the list ... |
|
10,351 | Mar 17, 2024 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/wnetwatcher_th.png"border="0"> |
|
WirelessConnectionInfo v1.17 WirelessConnectionInfo v1.17 A simple tool for Windows Vista/7/8/2008/10/11 that displays general information and statistics about the active wifi connection. Information includes the SSID, BSSID, PHY Type, Signal Quality, Receiving rate, Transmission Rate, Authentication Algorithm, Channel Number, Total number of transmitted/received frames, and more... System Requirements This utility works on Windows Vista/7/8/2008/10/11 32-bit or 64-bit. Older versions of Windows are not supported. Changes: Version 1.17: Added 'Add Header Line To CSV/Tab-Delimited File' option (Turned on by default). Added 'Copy Value' option. Start Using WirelessConnectionInfo WirelessConnectionInfo doesn't require any installation process or additional dll files. In order to start using it, simply run the executable file - WirelessConnectionInfo.exe After running it, the main window displays general information and statistics about your current wireless network connection. If WirelessConnectionInfo fails to detect your wireless connection, you should press F9, and choose the correct network adapter. Command-Line Options /stext <Filename> Save the wireless connection information into a regular text file. /stab <Filename> Save the wireless connection information into a tab-delimited text file. /scomma <Filename> Save the wireless connection information into a comma-delimited text file (csv). /stabular <Filename> Save the wireless connection information into a tabular text file. /shtml <Filename> Save the wireless connection information into HTML file (Horizontal). /sverhtml <Filename> Save the wireless connection information into HTML file (Vertical). /sxml <Filename> Save the wireless connection information into XML file. Translating WirelessConnectionInfo to other languages In order to translate WirelessConnectionInfo to other language, follow the instructions below: 1) Run WirelessConnectionInfo with /savelangfile parameter: WirelessConnectionInfo.exe /savelangfile A file named WirelessConnectionInfo_lng.ini will be created in the folder of WirelessConnectionInfo utility. 2) Open the created language file in Notepad or in any other text editor. 3) Translate all string entries to the desired language. Optionally, you can also add your ... |
|
1,173 | Nov 26, 2022 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/wirelessconnectioninfo_th.png"border="0"> |
|
WirelessKeyView v2.23 WirelessKeyView v2.23 Recover lost wireless network key. WirelessKeyView recovers all wireless network security keys/passwords (WEP/WPA) stored in your computer by the 'Wireless Zero Configuration' service of Windows XP or by the 'WLAN AutoConfig' service of Windows Vista, Windows 7, Windows 8, Windows 10, Windows 11 and Windows Server 2008+. It allows you to easily save all keys to text/html/xml file, or copy a single key to the clipboard. You can also export your wireless keys into a file and import these keys into another computer. License This utility is released as freeware. You are allowed to freely distribute this utility via floppy disk, CD-ROM, Internet, or in any other way, as long as you don't charge anything for this and you don't sell it or distribute it as a part of commercial product. If you distribute this utility, you must include all files in the distribution package, without any modification. Disclaimer The software is provided "AS IS" without any warranty, either expressed or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The author will not be liable for any special, incidental, consequential or indirect damages due to loss of data or any other reason. Known Problems False Alert Problems: Some Antivirus programs detect WirelessKeyView utility as infected with Trojan/Virus. The file is clean. Because of this, you will need to use a password to open this file. The password is: WKey4567# System Requirement Any version of Windows starting from Windows XP with SP1 and up to Windows 11. You must login to windows with admin user. In order to extract wireless keys from external drive of Windows 10/7/8/Vista, the minimum requirement is Windows XP with SP3. Please take note: Due to antivirus programs detecting this ... |
|
4,422 | Nov 27, 2023 Nir Sofer <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/wireless_key_view_screenshot_th.png"border="0"> |
OlderGeeks.com Copyright (c) 2024
