*****************************************
UPnP Wizard Readme
-XL- Development
https://www.xldevelopment.net
Copyright  2011 - 2021 -XL- Development
*****************************************

CONTENTS
========
I.   Summary
II.  Requirements
III. Change Log 

I. Summary
==========
UPnP Wizard is a simple tool that allows you to configure your router's port forwarding configuration using the Universal Plug and Play (UPnP) networking protocol.

II. Requirements
================
A UPnP enabled router.
Windows 10, 8, 7, Vista, XP, 2000, or 2008.

III. Change Log
==============
3/5/2021 Version 3.3.0.1
Command Line Version 3.3.0.2
- You can now specify the port lease duration when adding a port.
- Added lease duration display to list of ports.
Command Line Changes:
- Added duration option to specify lease time when adding ports.
- Note: Lease duration does not apply when using legacy mode.

1/14/2021 Version 3.2.0.5
Command Line Version 3.2.0.30
- Added support for multiple network interfaces.
- Added drop down to specify the binding IP address to use.
- Improved error messages.
Command Line Changes:
- Added scan option to search for and list all compatible UPnP enabled devices on the network.
- Added boundip option to specify which IP address to use.
- Added auto option to automatically find and use the first compatible UPnP enabled device.
- Added option to remove a mapping by external port and protocol.
- Replaced legacy options new new legacy flag.
- Renamed listexternalip option to externalip.
- Improved the information and error output.
- Improved verbose output.


6/9/2020 Version 3.1
- Added verbose command line option to display UPnP network request and response.
- Fixed issue that would create a disabled port mapping on some routers.
- Fixed issue that would prevent the command line tool from displaying the external IP address of some routers.
- Updated command line version to print out a mappings enabled property.

5/28/2019 Version 3.0.0.1
Command Line Version 3.0.0.1
- Added new UPnP library with support for many new routers.
- Added status bar to display UPnP device information and external IP.
- Added option to swap back to legacy UPnP library.
- Added command line option to display external IP address.
- Added command line options to use legacy UPnP library.
- Fixed resizing display issue with port mappings list.

2/19/2019 Version 2.5.0.34
Command Line Version 2.5.0.30
- Added command line option to list local IP addresses.
- Added command line option to use default local IP address when creating new port mappings.

1/3/2019 Version 2.4.0.33
Command Line Version 2.4.0.16
- Improved compatibility with older versions of Windows.
- Double clicking will now display the port information.
- Fixed issue that could cause toolbar to disappear.
- Small visual update.

2/12/2016 Version 2.3.0.30
Command Line Version 2.3.0.12
- Improved errors and warnings in the command line version.
- Fixed an error that prevented the removal of port mappings with a different internal and external port.

5/18/2015 Version 2.2.0.26 
Command Line Version: 2.2.5615.16288
- Added new command line version (UPnPWizardC.exe).
- Fixed exception that occurred when the Cancel button was selected from the Add Mapping dialog.
- Columns now properly auto size when the port mappings are refreshed.

2/2/2015 Version 2.1.0.20 Release
- Fixed a UI bug with column layout.

8/3/2014 Version 2.0.0.13 Release
- Fixed a bug that prevented configuring ports on the same IP address with different protocols.

7/14/2014 Version 2.0.0.12 Release
- Added ability to specify external port.
- External IP address is now displayed next to internal IP address.
- Fixed issue that would cause a crash when UPnP is not enabled on the router.

6/27/2011 Version 1.0.0.7 Release
-Initial Release
